• Bulletin of the Korean Mathematical Society
• /
• v.60 no.5
• /
• pp.1409-1425
• /
• 2023

In this paper, we are devoted to studying the mixed radial-angular integrabilities for Hardy type operators. As an application, the upper and lower bounds are obtained for the fractional Hardy operator. In addition, we also establish the sharp weak-type estimate for the fractional Hardy operator.

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.605-612
• /
• 2004

This is a study which evaluates the brand personality on casual brands according to the sensibilities of consumers. Focus is placed on classifying the sensibilities of consumers through G sensibilities developed by the Fuji Research Institute in Japan, and then on investigating brand personality of casual wear, Levi's in particular. The subjects are 187 male and female college students living in the Busan area. Data were, using SPSS 10. 0 for Window, statistically analyzed by frequency and factor analysis for VARIMAX, Cronbach's coefficient, and ANOVA. The results of data analysis are as follow; First, in the distribution of G sensibility type, the majority of the respondents have G3(whimsical) type, and then followed by G1(my pace) type, G4(active) type, G2 type(active) type and then G5(sensualist) type. Second, as a result of brand personality evaluation on the casual brands, it has been represented by the following 5 factors; passion, competence, honesty, sophistication, and sentiment. Third, the brand personalities according to G sensibilities showed significant differences among respondents; G5 type(sensualist) especially showed the highest brand personality in the passion and sentiment factors, which are distinctive in the brand personality of Levi's. Consumers of G1 type, G2 type, G3 type, and G4 type showed high brand personality in the competence and honesty factors. The evaluation of brand personality, case study for products development and application, and application of the results need to be continued for follow-up study.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.847-856
• /
• 2002

Cellular network applications are growing drastically and this requires a fast and efficient transport method between the base station and the mobile switching center. One possible solution is to use ATM links. The low data rate and small-sized packets in the typical cellular applications imply that significant amount of link bandwidth would be wasted, if this small sized packet is carried by one ATM cell. For efficient operation for such cellular and low bit rate applications, a new type of ATM Adaptation Layer, AAL Type 2, has been proposed. In this paper, the principles of AAL Type 2 are briefly described along with the introduction of other alternatives which have formed the basis for this new AAL. The result from the simulation to study the performance of the AAL Type 2 is discussed from the view point of packet delay and ATM cell use efficiency. Due to the variable size of packets in this application, the fairness issue in serving variable sized packets is also discussed along with the effect of fair queueing algorithm implemented at AAL Type 2.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.3
• /
• pp.29-37
• /
• 2017

Purpose : Due to the shortage of the room for the disabled, it may be difficult to use the accommodation for the disabled (especially wheelchair users). The purpose of this paper is to propose a universal design(UD) application for all rooms to solve the problems caused by the shortage and the decrease of the usage rate of the rooms for the disabled. Methods : Classify and analyze the type of room and bathroom according to the survey. The space of the room is classified into six types mainly based on the relation and location among the entrance, the bathroom, and the bedroom. Also, the bathroom is classified into 20 types considering the positional relationship with the entrance and between sanitary fixture. By using these types, FGI survey will be conducted and the application of UD will be reviewed and presented. Results : We analyzed by using the types of the room and the bathroom. One of majority type in the actual research and two of UD applicable types from FGI, are shown UD application. In addition, the bathroom were analyzed about four types from FGI. The room were shown about the activity space and the furniture layout for UD. The bathroom were shown about the space for the entrance, the internal activitiy space and the arrangement of the sanitary fixture. Implications : By comparing and analyzing through type classification, it was found that universal design can be applied to all rooms. Therefore, it is expected that the UD will be activated in all rooms of the accommodation.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.3
• /
• pp.212-221
• /
• 2007

Objectives : This study was conducted to test patients with Atopic Dermatitis by external application with Gynostemma Pentaphyllum MAKINO in cosmetics. Methods : We gave scores to 59 patients who visited the Dept. of Oriental Medical Opthalmology & Otolaryngology & Dermatology of Daegu Hanny Oriental Medical Center from July 1st, 2005 to December 31th. We checked the clinic index score(extent. intensity : the degree of erythema, induration or papulation, puritus, excorination, lichenification, scaling or dryness, erosion or oozing or weeping. the degree of itching), Eosinophil count and IgE. Results : There are 46 patients we could check by clinic index score, and 44 patients by laboratory. 1. In the 46 cases clinic index score was significantly decreased between the before- and afterexternal application treatment periods(P<0.01). 2. The 46 cases was devided into two types (moist heat type and blood dryness type) by intensity. External application of Gynostemma Pentaphyllum MAKINO in cosmetics did not significant change by two types. 3. In the 44 laboratory cases, the number of eosinophil counts was decreased but the number of IgE was significantly increased. Conclusions : Considering the above results, we have concluded that cosmetics with Gynostemma Pentaphyllum MAKINO have the remedical effect for Atopic Dermatitis.

• KIEAE Journal
• /
• v.15 no.3
• /
• pp.43-48
• /
• 2015

Purpose: Recently, many countries around the world are actively looking for the ways to make full use of natural energy sources and also develop and apply an environmentally friendly system designed to save building energy consumption. Under these circumstances, this study intended to determine the applicability and energy saving effect by deriving the indoor thermal performance characteristics and the PCM temperature appropriate for a double skin façade to reduce indoor energy consumption through the application of different PCM temperatures to double skin façade and perform a performance evaluation depending on the application or non-application of PCM to a double skin façade. Method: For this study, the physical variables of the double skin façade with PCM were configured through a preliminary examination based on an experimental measurement, and experimental measurements were taken with a total of 7 types of mockup cases: Type-1 (Basic), the basic double skin façade, Type-2 (PCM $18^{\circ}C$) which was applied to the inner skin of the double skin façade depending on the phase-change temperature of PCM, Type-3 (PCM $20^{\circ}C$), Type-4 (PCM $22^{\circ}C$), Type-5 (PCM $24^{\circ}C$), Type-6 (PCM $26^{\circ}C$), and Type-7 (PCM $28^{\circ}C$) with reference to the data analysis of the basic double skin façade which preceded this study, to analyze the indoor thermal performance of the double skin façade depending on PCM temperature and the installation or non-installation of a double skin façade applying PCM based on the selected unit space. Result: Indoor thermal performance was analyzed depending on the PCM temperature applicable to double skin façade, and the analysis of heating energy reduction showed that Type-2 (PCM $18^{\circ}C$) gained 15.9% more heat compared with Type-1 (Basic) and secondly, Type-3 (PCM $20^{\circ}C$) gained 11.5% more heat. Based on these findings, it is deemed possible that the use of energy for heating can be reduced when heat coming indoors increases during the heating period, and the appropriate temperature for PCM applied to the inner skin of a double skin façade to reduce heating energy in winter, Type-2 (PCM $18^{\circ}C$) showed the highest efficiency and Type-3 (PCM $20^{\circ}C$) was also deemed appropriate.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.4
• /
• pp.1-11
• /
• 2017

This article reviews the recent activities of field testing and application of superconducting fault current limiters (SFCL) based on high-temperature superconductors (HTS). The review particularly focuses on the trends in the field tests in terms of the technical aspects and commercial activities of the SFCLs. Stimulated by the discovery of HTS, numerous research and development activities have been conducted worldwide for SFCLs operating from distribution voltages to transmission voltages. Different types of SFCLs have been developed and field-tested. Consequently, more than 20 field tests and applications have been performed on real grids worldwide while supplying electric power to the customers. These field tests have not only provided the track records of the operation experiences including the problems and maintenance during operation, but also proved their current limiting capabilities against real faults, rendering this new technology highly viable. Through these activities, the following trends in the status of field testing and application are observed. Resistive-type SFCLs with HTS-coated conductors were dominantly used in the most recent field tests. This implies that the resistive type is technically more mature than the other types. Bus-bar coupling and transformer feeders were the major application locations. It is of importance that most of the field applications were conducted as R&D projects. A relevant change from the R&D stage to the application stage is shown as recently deployed SFCLs are expected to be under long-term operation and commercial service. Here, we review the installation of these SFCLs by substation. This review also discusses the recent activities for their commercial applications.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.3
• /
• pp.343-357
• /
• 1999

The color change of maxillofacial silicone has been attributed to certain environmental factors such as exposure to the UV component of natural sunlight, wetting and drying of the elastomer and surface abrasion resulting from the application and removal of cosmetics. The purpose of this study was to evaluate the color change of maxillofacial silicone (Silastic MDX4-4210) according to type of pigment (cadmium yellow, titanium white, cosmetic red), and UV absorber application method after 200, 400, and 600 hours of 350nm UV light irradiation. The results were as follows. 1. According to type of pigments, after 200 hours cosmetic red showed significantly larger color change than cadmium yellow and titanium white, and after 400 and 600 hours color change significantly decreased in the order of cosmetic red, cadmium yellow, and titanium white (p<0.05). 2. In the cadmium yellow group, after 200 hours, the non-treatment group showed significantly larger color change, but after 400 and 600 hours, color change significantly decreased in the order of non-treatment, surface application and mixed group (p<0.05). 3. In the titanium white group, there was no significant color change difference between the three groups after 200 and 400 hours, but after 600 hours, the mixed group showed significantly smalt or color change than the non-treatment and surface application groups (p<0.05). 4. In the cosmetic red group, there was significant decrease in color change in the order of non-treatment, surface application and mixed group (p<0.05). From the results above, the effect of UV light absorber differed according to the type of pigment, but mixing UV light absorber with maxillofacial silicone is thought to give superior resistance against UV light irradiation in the long run.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.1
• /
• pp.78-83
• /
• 2012

The abundant nutrients contained in deep seawater are delivered by natural upwellings from the deep sea to the surface sea. However, the natural upwelling phenomenon is limited to specific areas of the sea; in other areas, the thermocline separates the surface sea from the lower layer. Thus, the surface layer is often deficient in nutritive salts, causing the deterioration of its primary productivity and ultimately leading to an imbalance in the marine ecosystem. Without a consistent supply of nitrogenous nutritive salts, they are absorbed by phytoplankton, resulting in a considerable problem in primary productivity. To solve this issue, a floating type of artificial upwelling system is suggested to artificially pump up, distribute, and diffuse deep seawater containing rich nutritive salts. The key technologies for developing such a floating artificial upwelling system are a floating offshore structure with a large diameter riser, self-supplying energy system, density current generating system, method for estimating the emission and absorption of CO2, and way to evaluate the primary production variation. Strengthening the primary production of the sea by supplying deep seawater to the sea surface will result in a sea environment with abundant fishery resources.

• KIEAE Journal
• /
• v.12 no.2
• /
• pp.83-92
• /
• 2012

Recently, many countries are tightening a variety of policies and controls with great efforts to reduce emission of GHGs(Greenhouse Gases) as concern for climate change heightens. The purpose of the study is to provide guidelines for planning and evaluate element and evaluate housing development. The elements are also assorted into 6 sections and 30 planning elements were drawn from them. It is drawn to 6 sections, 27 categories, 31 evaluation elements except cultural and perceptual aspects unrelated to planning elements from these elements. Case analysis has shown that most of planning elements were applied because these cases obtained environment-friendly certification in the country. Followings are the common characteristics. Firstly, it showed that application of planning element in all cases is excellent. Secondly, the case with excellent application of elements related with energy and application degree obtained excellent degree i environment-friendly certification in the country. Finally, application of planning elements related with renewable energy was in poor condition in all cases. With the utilization of SBTool, the evaluation results about planning elements of housing complex of Carbon emissions-reduction type showed that CASE-A obtained 11.17 points and CASE-B obtained 9.24 points. In the case of renewable energy section, it was confirmed that the evaluation doesn't work well. As a result, changes of planning elements affect environment-friendly extent. It was confirmed that accessibility to housing complex of Carbon emissions-reduction type could change. Estimated result of Amount of Carbon emission showed that annual energy consumption per each family of CASE-A is $4,269,964MJ/m^2$, as a result of which, Carbon emission is $234,815kg/m^2$. And annual energy consumption per family of CASE-B is $4,197,563MJ/m^2$, as a result of which, Carbon emission is $214,584kg/m^2$. Application of planning elements in the aspect of housing complex of Carbon emissions-reduction type shows that the level for Carbon emissions-reduction is high level. And study with assessment from the draft should be followed.