• Nuclear Engineering and Technology
• /
• v.41 no.8
• /
• pp.1065-1072
• /
• 2009

As the use of software increases at nuclear power plants (NPPs), the necessity for including software reliability and/or safety into the NPP Probabilistic Safety Assessment (PSA) rises. This work proposes an application procedure of software reliability growth models (RGMs), which are most widely used to quantify software reliability, to NPP PSA. Through the proposed procedure, it can be determined if a software reliability growth model can be applied to the NPP PSA before its real application. The procedure proposed in this work is expected to be very helpful for incorporating software into NPP PSA.

• Nuclear Engineering and Technology
• /
• v.28 no.3
• /
• pp.331-338
• /
• 1996

In the thermal-hydraulic design, the effect of fuel rod bow is quantified tv the rod bow DNBR penalty which is a key design parameter to assure the coolability of fuel assembly in the pressurized water reactor. In this work, a computer program for the evaluation of the rod bow DNBR penalty based on Westinghouse methodology is developed and its application procedure is proposed. The computer simulation is based on the Monte-Carlo method. The qualification of developed computer program is performed by a comparison of calculational result with that given by Westinghouse's document. A new application procedure is built using batch mean and batch standard deviation. The normality of sample population generated by the batch calculation is confirmed by means of a chi-square test for goodness of fit. On the view point of statistics it is effected that the more reliable design value may be produced by the new application procedure.

• IE interfaces
• /
• v.11 no.3
• /
• pp.129-141
• /
• 1998

In this paper, a rescheduling procedure is developed for shipbuilding master production schedule. Shipyard initially develops backward production schedules for the entire shipbuilding process, and then refines the schedule by stage. The rescheduling procedure of this paper tries to resolve the schedule discrepancies between the outdoor backward schedule and the refined indoor schedule. Through the proposed rescheduling procedure, outdoor schedule can be successfully adjusted using buffer days and duration reduction. An Object-oriented program is also developed to automate the procedure. We can observe the improvement on productivity and quality of rescheduling works from the application of the developed procedure.

• Journal of Korean Society for Quality Management
• /
• v.16 no.1
• /
• pp.32-42
• /
• 1988

The general n/m job-shop problem is easy to state what is required, but it is extremely difficult to make any progress whatever toward a solution. This paper was first to examine a heuristic procedure of general n/m scheduling generation focused on the procedure of MWRK (Most Work Remaining) presented by Giffler and Thompson (1960) among others. Then modified procedure was proposed to obtain better solution in light of the key measure of performance compared with that of the literature presented by Baker (1974). The modified procedure then has been extended to other example problem to test the better results and to assure the properness of application.

• Korean Management Science Review
• /
• v.13 no.2
• /
• pp.205-213
• /
• 1996

This paper develops a simple interactive procedure which can be efficiently used to solve a bicriteria linear programming problem. The procedure exploits the relatively simple structure of the bicriterion linear programming problem. Its application to a transportation problem is also presented. The results demonstrate that the method developed in this paper could be easily applicable to any bicriteria linear program in general.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.131-142
• /
• 1996

Most industrial robots cannot be off-line programmed to carry out a task accurately, unless their kinematic model is suitably corrected through a calibration procedure. However, normal calibration is an expensive and time-consumming precedure due to the highly accurate measurement equipment required and due to the significant amount of data that must be collected. This paper presents a simple and economic procedure to improve the efficiency of robot calibration especially for arc welding application. To simplify the measurement process, an automotic data measurement algorithm as well as a simple measurement device are developed. Also, a calibration algorithm which can automatically identify the independent model parameters to be estimated is presented. To demonstrated the simplicity and the effectiveness of the procedure, experimental studies and computer simulations are performed and their results are discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.778-781
• /
• 2004

Recently, one of the reason of noise problems is urban planning has little concern about noise. For solving noise problems, strategic action is needed during urban planning. The noise map is one of the solution for concerning about noise in urban planning and EC has been studied the noise map for the strategic purpose since 1970s. The noise map is powerful tool for predicting sound level, calculating exposure population and evaluating the efficiency of the noise reduction plan. In Korea, The noise map is a unfamiliar field. The experience is few for noise-mapping and the noise mapping procedure has not been standardization yet. For activation of noise map, the study about fundamental problems of collecting data md noise-mapping procedure must be need. This paper is for studying on the noise-mapping procedure in Korea and application of noise map.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.23 no.2
• /
• pp.109-117
• /
• 2019

In this study, a design procedure for the practical application of the dampers to building structures under earthquake loads was presented by using earthquake response spectrum. Nonlinear time history results using a 10 story building structure installed with damper verified the effectiveness of the proposed procedure by showing that the structural response could be reduced to the target performance level for seismic loads. Since the proposed design procedures are based on response spectrum seismic analysis result of the original structure, the capacity, location and the number of damper and the consequent response reduction effects can be preliminarily determined without performing the nonlinear time history analysis.

• Journal of Computing Science and Engineering
• /
• v.9 no.1
• /
• pp.20-28
• /
• 2015

General purpose computing applications have not yet been thoroughly explored in procedure level speculation, especially in the light-weighted profiling way. This paper proposes a light-weighted profiling mechanism to analyze speculative parallelism characterization in several classic general purpose computing applications from SPEC CPU2000 benchmark. By comparing the key performance factors in loop and procedure-level speculation, it includes new findings on the behaviors of loop and procedure-level parallelism under these applications. The experimental results are as follows. The best gzip application can only achieve a 2.4X speedup in loop level speculation, while the best mcf application can achieve almost 3.5X speedup in procedure level. It proves that our light-weighted profiling method is also effective. It is found that between the loop-level and procedure-level TLS, the latter is better on several cases, which is against the conventional perception. It is especially shown in the applications where their 'hot' procedure body is concluded as 'hot' loops.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.211-217
• /
• 2012

Objective: The aim of this study is to show a correct application procedure using the compact Korean anthropometric data application program called Korean Human Scale(KHS) for anthropometric design. Background: The nation-wide anthropometric survey project called 'Size Korea' developed KHS and distributed it to the public on the web site. But some insufficiency of the current web service of KHS misleads the users; they just put their own statue and pick up a meaningless data for a body dimension. Method: This study provides five steps to follow to read appropriate data from KHS for an anthropometric design. Results: As a case study, the depth dimension of the supervisory and control console used in the Korea nuclear power plant was determined following the procedure and compared with the console design guideline recommendation. Conclusion: The supplementary anthropometry table should be added on the web service of KHS for users to read a meaningful data for design. Application: If properly used, the KHS has a lot more potential application area than users can expect such as in control center design area.