• Journal of Mechanical Science and Technology
• /
• v.16 no.11
• /
• pp.1550-1557
• /
• 2002

Diode laser sensor for measuring gas temperature and species concentration in combustion chamber was developed using 2.0 tim distributed feed back lasers. To evaluate the measurement sensitivity of diode laser sensor system, CO2 survey spectra near 2.0 Um were measured and compared with the calculated one. This diode laser absorption sensor was applied to measure gas temperatures in a premixed flat flame of CH$_4$-air mixture. Experimental results were in good agreement with the values by an R-type thermocouple within 6.12%. In addition, successful demonstration of measurement of gas temperature and species concentration in a soot flame showed the promising possibility of diode laser absorption sensors for practical combustion system with non-intrusive method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.511-516
• /
• 2002

Pitch is a perception related to the subjective frequency that is one of the psychological aspects or attributes of tones. It is also an important factor to determine the sound quality together with loudness and timber. Although the study on pitch has been active in the field of speech communication, but its application to the product sound quality is not yet enough. In this study, the empirical data by Zwicker is made use in the modification of the currently available pitch extraction model based on the place theory. By applying this modified model to various sound samples composed of tonal or banded components, the applicability of the model is suggested. As a demonstration example, the algorithm is used for the sound quality analysis of a product noise having fundamental frequency and harmonics. The result shows that the pitch should be regarded as an important subjective cue in the sound quality analysis.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.123-130
• /
• 2001

At present, the virtual prototyping technology for complex product is one of the research and application hotspots in current simulation technology. In authors viewpoint, the virtual prototype development for complex product has become a systematic engineering, which can be called the complex product virtual prototyping engineering (CPVPE). In this paper, the architecture, key technologies and its supporting environment of CPVPE are primary discussed firstly. Combined with the research project and primary practice undertaken by the authors, a typical application demonstration of the aerospace complex product virtual prototyping engineering (including mechanism, dynamics, software and control system) is also introduced based on the virtual prototype supporting environment developed by the authors. Finally, some further research works on CPVPE are also presented in this paper.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.190-193
• /
• 2004

Ever since the ideal forming theory has been developed fur process design purposes, application has been limited to sheet forming and, for bulk forming, to two-dimensional steady flow. Here, application for the non-steady case was performed under the plane-strain condition based on the theory previously developed. In the ideal flow, material elements deform following the minimum plastic work path (or mostly proportional true strain path) so that the ideal plane-strain flow can be effectively described using the two-dimensional orthogonal convective coordinate system. Besides kinematics, for a prescribed final part shape, schemes to optimize a preform shape out of a class of initial configurations and also to define the evolution of shapes and boundary tractions were developed. Discussions include the two problematic issues on internal tractions and the non-monotonous straining. For demonstration purposes, numerical calculations were made for a bulk part under forging.

• Journal of the Korean Society for Railway
• /
• v.10 no.4
• /
• pp.373-380
• /
• 2007

Recently, various 4D CAD systems for visualizing construction schedule data are being developed. Specially, in case of railway project, the numerical information of progress data should be changed with visualized data by long construction section because the railway project consists of long length in construction site. This study suggests a case study of development of 4D CAD system for visualizing schedule information and the major functions of developed system are verified by railway project. The detailed application procedure of 4D CAD system including input data for a railway project is described in the study. The practical application of 4D CAD system can be improved in railway project by these demonstration researches.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.667-671
• /
• 2005

Analytical hierarchy process (AHP) is a potential decision making method in management that can be used in project management as well. Lack of productivity is perhaps the number one problem confronting in the construction industry. There are numerous factors which affect the productivity of a construction project, so it is necessary to find out the critical factors giving birth to productivity. In this paper, construction productivity is taken as example for the demonstration of the AHP application to find out the critical productivity factor in which the Level 1 is taken as selection of critical productivity factor, Level 2 as construction parties and Level 3 as productivity factors group. The outcome of this study is beneficial to the entire constructional professionals for applying the AHP.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.2
• /
• pp.153-170
• /
• 2022

Waterjet has been comprehensively used in urban areas owing to a suitable technique for cutting concrete and rock, and low noise and vibration. Recently, the abrasive waterjet technique has been adopted and applied by the Korea Atomic Energy Research Institute to demolish concrete plugging without disturbing and damaging In-situ Demonstration of Engineered Barrier System in the disposal research tunnel. In this study, the use of abrasive waterjet in the tunnel was evaluated for practical applicability and the existing cutting model was compared with the experimental results. As a variable for waterjet cutting, multi-cutting, water flow rate, abrasive flow rate, and standoff distance were selected for the diversity of analysis. As regarding the practical application, the waterjet facilitated path selection for cutting the concrete plugging and prevented additional disturbances in the periphery. The pump's noise at idling was 64.9 dB which is satisfied with the noise regulatory standard, but it exceeded the standard at ejection to air and target concrete because the experiment was performed in the tunnel space. The experimental result showed that the error between the predicted and measured cutting volume was 12~13% for the first cut and 16% for second cut. The standoff distance had a significant influence on the cutting depth and width, and the error tended to decrease with decrement of standoff distance.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1525-1538
• /
• 2008

Currently, it has been a fashion to include RAMS of rolling stock in the order for purchasing the rolling stock. However, it's only to suggest a qualitative value or an ideal target without giving or demonstrating actual RAMS target, with only demonstrating passive RAMS by the data provided by the manufacturer. In the case of KTX project of 100 cars of KTX-II contracted in June 2006, their target has been suggested from the previous RAMS application standard and it aimed to achieve the reliability level of equivalent high speed rolling stock. Afterward, as actual KTX-II RAMS Plan and RAMS Demonstration Plan has been prepared and approved, it has been the first problem to secure the reliability and safety in order to introduce the new high speed rolling stock(KTX-II) successfully and we actually tried to apply overseas RAMS standard, KTX samples, electric railcar MTRC and rolling stock samples. This Report was dealt world trends of Railway RAMS standard, KTX-II RAMS Specifications, the present condition of KTX-II RAMS performance and development a way of KTX-II RAMS, We hope the "KTX-II RAMS Application Standard for Safety of Passenger Transportation Service" is served as an opportunity for the basic research for establishing and demonstrating RAMS target of components or parts composing the rolling stock system.

• KIEAE Journal
• /
• v.17 no.1
• /
• pp.5-13
• /
• 2017

Purpose: This study, by comprehensively the characteristics of new Hanok application techniques with the proposed site application technology in the course of the design changes that have been accumulated through Hanok technology development the second stage business, by analyzing the range of reflection, new Considering the direction reflects the efficiency of the new Hanok application techniques. Method: new Hanok application technology, it was been established through research and development of large 1 new Hanok technology it has been proposed through the "site-specific application techniques" and 2 builders and designers "space-time proposed technique" Analysis of the case, at the center of the design changes, the land the body of laws and regulations, the requirements of the public buildings, compared to the construction method and the like for the reduction of construction costs, new Hanok applied technology in the process of change by it There was analyzed whether acceleration on the range and step which is reflected in the design Result: The result of new Hanok applied technology was built through the demonstration build business case, process another major technology, foundation, woodwork, walls, roof, has been reflected in the ceiling construction, the inclusion of items in the proposed technique of construction , it was applied to the main steps in general, except for other construction work landscaping. Application techniques and construction proposal technology research team has presented, show the difference between the scope and method. With significance effort to improve the unreasonable traditional methods of these core processes that can be reflected in the field repeated the construction proposed technique as a result of the utility that can be applied for substantial construction.

• Nuclear Engineering and Technology
• /
• v.45 no.3
• /
• pp.401-414
• /
• 2013

HTR50S is a small modular reactor system based on HTGR. It is designed for a triad of applications to be implemented in successive stages. In the first stage, a base plant for heat and power is constructed of the fuel proven in JAEA's $950^{\circ}C$, 30MWt test reactor HTTR and a conventional steam turbine to minimize development risk. While the outlet temperature is lowered to $750^{\circ}C$ for the steam turbine, thermal power is raised to 50MWt by enabling 40% greater power density in 20% taller core than the HTTR. However the fuel temperature limit and reactor pressure vessel diameter are kept. In second stage, a new fuel that is currently under development at JAEA will allow the core outlet temperature to be raised to $900^{\circ}C$ for the purpose of demonstrating more efficient gas turbine power generation and high temperature heat supply. The third stage adds a demonstration of nuclear-heated hydrogen production by a thermochemical process. A licensing approach to coupling high temperature industrial process to nuclear reactor will be developed. The low initial risk and the high longer-term potential for performance expansion attract development of the HTR50S as a multipurpose industrial or distributed energy source.