• 품질경영학회지
• /
• 제34권1호
• /
• pp.20-26
• /
• 2006

In the fields of mechanical reliability application, "zero" or "zero or one" failure tests are most commonly used for demonstrating reliability of a product since they reduce test duration and/or sample size compared to other test methods that guarantees the same reliability of a product with a given confidence level or consumer's risk. The test duration of the "zero or one" failure test is longer than that of "zero" failure test but it has advantage of smaller producer's risk. In this paper a two-stage test is developed that compromises the "zero" and "zero or one" failure tests. The properties of the proposed two-stage test are investigated and the three test methods are compared using a numerical example.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.246-249
• /
• 2007

The application of photovoltaics into building as integrated building components has been paid more attention worldwide. Photovoltaics or solar electric modules are sol id state devices, directly converting solar radiation into electricity; the process does not require fuel and any moving parts, and produce no pollutants. And the prefab building method is very effective because the pre- manufactured building components is simply assembled to making up buildings in the construction fields especially the sandwich panel. So, this paper describes a design and performance test of the 10kW poly metal pv module(pmpp) system. It is concluded that the prediction of BIPV system's performance should be based on the more accurate PV module installation.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.91-94
• /
• 2003

A field pilot-scale demonstration of an enhanced SVE using hot air injection and extraction was conducted to remove diesel range compounds from subsurface soils at a site in J-city, Korea. The objective of demonstration was to evaluate field ISR by intrinsic microorganism after an application study of hot air-SVE technology and to calculate each first-order kinetic with soil temperature. TPH concentration of contaminated soil at the site was approximately 2, 000~11, 000 mg/kg (average 6, 900 mg/kg) with depths greater than 5 m bgs. The 1st-order reaction rate constants, k were 0.0438(@about5$0^{\circ}C$), 0.0564(@4$0^{\circ}C$), and 0.0685(@33$^{\circ}C$) d-1 respectively.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.156-161
• /
• 2004

The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar hot water heater with high efficiency has been used for the house and the industrial process on business, advanced nations were reached up the experimental stage of solar generation system. But, the actual circumstance of the domestic has been not accomplished the popularization of solar hot water heater and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar hot water heater, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar hot water heater, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid for the enlargement and the popularization on solar energy.

• KIEAE Journal
• /
• 제4권4호
• /
• pp.45-52
• /
• 2004

Simulation of daylighting by computer program is a method to avoid unnecessary efforts in manufacture of its testing models, to reduce its measuring tolerances and be able to provide variations of various weather conditions as well. Many simulation programs on daylighting have been released freely or commercialized for selling, however, a demonstration of their availability and validity as a tool for evaluating daylighting performance is required since each one has its own characteristics. The objectives of this study lie in suggesting an application method of evaluation tools and demonstration of limits and characteristics so as to more easily determine the daylightingperformance in the very initial stages of planning for an arbitrary office space in which windows with daylight access are built. We produced scale model of the general light inducing type side lighting with lightshelfand ceiling, and the luminance (at 78 measuring points) and illuminance (at 84 measuring points) were measured in a clear sky. And a comparison of the measured values and the calculated values from a computer simulation using the Lightscape program was performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.27-29
• /
• 1994

The application of Computer is utilized as instruction tool. In order to improve the educational qualitative effect of the moter in the electrical engineering part, this paper has described the development of teaching tool for the structure, principle, characteristics and control method of the induction motor by applying the demonstration and simulation type among various computer aided instructions (CAI). The educational technology is applied to the demonstration type using 3 dimensional model in consideration of a visual effect about the structure and principle of the induction motor. Teaching tool is applied to simulation type which presents onrush various results to understand the characteristic and the control method of the induction motor.

• Journal of Electrical Engineering and Technology
• /
• 제7권1호
• /
• pp.103-108
• /
• 2012

The present study describes the considerations on the long-term reliability of the on-line partial discharge (PD) ceramic sensor for thermal power generators. Voltage acceleration aging tests were carried out under continuous and impulsive thermal aging at more than $100^{\circ}C$, considering the practical service environment. Experimental results show that the sensors have a life that could last for more than 100 years, excellent dielectric characteristics, and insulation strength. In addition, the ceramic on-line PD sensors were installed in a thermal power generator in Korea for demonstration. The results of the PD calibration and test voltage application prove that the on-line ceramic sensors have satisfactory performances for on-line PD measurement.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.513-518
• /
• 1996

This report presents a demonstration of application of realistic evaluation methodology to a posturated cold leg large break LOCA in a Westinghouse three-loop pressurized water reactor with 17$\times$17 fuel. The new method of this analysis can be divided into three distinct step: 1) Best Estimate Code Validation and Uncertainty Quantification 2) Realistic LOCA Calculation 3) Limiting Value LOCA Calculation and Uncertainty Combination RELAP5/MOD3/K ［1］, which was improved from RELAP5/MOD3.1, and CONTEMPT4/MOD5 code were used as a best estimate thermal-hydraulic model for realistic LOCA calculation. The code uncertainties which will be determined in step 1) were quantified already in previous study ［2］, and thus the step 2) and 3) for plant application were presented in this paper. The application uncertainty parameters are divided into two categories, i.e. plant system parameters and fuel statistical parameters. Single parameter sensitivity calculations were performed to select system parameters which would be set at their limiting value in Limiting Value Approach (LVA) calculation. Single run of LVA calculation generated 27 PCT data according to the various combinations of fuel parameters and these data provided input to response surface generation. The probability distribution function was generated from Monte Carlo sampling of a response surface and the upper 95$^{th}$ percentile PCT was determined. Break spectrum analysis was also made to determine the critical break size. The results show that sufficient LOCA margin can be obtained for the demonstration NPP.

• 한국디지털건축인테리어학회논문집
• /
• 제8권2호
• /
• pp.47-56
• /
• 2008

The purpose of this study is to arrange the design elements and methods for sustainable community. After made the concept of sustainable community clear in the contemporary architecture and urban design, this study examines rural ecovillage, urban demonstration project, co-housing, new urbanism and urban village, and ecological township as the application modes of sustainable community. Through the cases of the application mode, the design elements for sustainable community were summarized as the followings: the symbiosis system with the nature, permaculture and edible landscape, identity, the technology for saving of resources and energy, the traffic system for the reduction of private motor use, mixed use development, and the housing with diversity. And the design methods for sustainable community were summarized as the followings: strategic planning, visioning, community action planning, workshops and charrette, environmental evaluation, and participation techniques.

• 에너지공학
• /
• 제28권2호
• /
• pp.36-46
• /
• 2019

도심지 유통물류시설 실증사이트에 ESS기반 융복합 제품 적용 및 관련 시스템 구축을 통하여 유통물류시설에서의 ESS 설치 공간적 제약 극복, 실증을 통한 안정성과 성능 검증, 제품 적용과 데이터 수집 분석을 통한 효율적 운영 방안 마련 등과 제품 적용에 따른 피크 제어 및 비상발전기 가동 전 대체 등을 설계함으로써 ESS의 유통물류 시설 보급 확대 기반을 마련하였다.