• Tribology and Lubricants
• /
• v.31 no.5
• /
• pp.213-220
• /
• 2015

This study evaluates the effect of grooves on the stem part of a plunger on the lubrication characteristics of a fuel injection pump (FIP) by using hydrodynamic lubrication analysis. The current study uses the two-dimensional Reynolds equation to evaluate the changes in lubrication characteristics with variations in clearance, viscosity, and grooves for a laminar, incompressible, and unsteady state flow. This study investigates the lubrication characteristics by comparing the dimensionless minimum film thickness or the film parameter, which is the ratio of the minimum film thickness to surface roughness. The analysis method for the groove section differs depending on the depth of the groove. For instance, in the case of a shallow groove, the film thickness equation considers the depth of the groove, while in the case of a deep grove, it considers the flow continuity. The lubrication characteristics of the FIP are more sensitive to changes in the groove width than to changes in other design variables. Moreover, the application of a groove is more effective under low viscosity conditions. The smaller the distance from the edge of the stem part to the first groove in the case of shallow grooves, the better are the lubrication characteristics of the FIP. In contrast, in the case of deep grooves, the lubrication characteristics of the FIP improve as the distance increases. The application of shallow grooves is more effective for improving the lubrication characteristics than the application of deep grooves.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.19-26
• /
• 2009

The Ministry of Land, Transport and Maritime Affairs(MLTM) project for the DB construction of national geotechnical information was automatically computerized the geotechnical investigation results on the construction site in 2007. So 'the rule for computerizing of geotechnical investigation results and its application' were promoted the establishment and applicable project. It was promoted in earnest that all organization and affiliation of MLTM, local governments included the project because of stabilization of the law from 2008. We have analyzed a application-ratio of geotechnical information about users of geotechnical information system and distribution data and established a plan of applying enhancement for the DB construction and DB utilization in 2008. In this paper, we propose the result for application-ratio analysis and application plan through the application-case study of national geotechnical information DB. In the application-ratio analysis, the analysis in the field shows the most high as 39% in construction planning and preliminary investigation, the analysis in the effect of capabilities shows the most high as 25% in the increased efficiency of business. Also the analysis in the field of application shows the most high as 95% a application-ratio of geotechnical information in architecture and civil.

• Journal of Information Technology Applications and Management
• /
• v.11 no.1
• /
• pp.101-115
• /
• 2004

The goal of this research is to improve SLA index that measures service performance level as a result of outsourcing Information system, and also to identify the best application method. This research identifies SLA applied cases and improving points based on the evidence collected from three major financial institutions that utilized outsourcing. First this study analyzes SLA applied cases of two different companies and discusses SLA application improvement possibilities. It then introduces a successful case of a third company that adopted SLA index.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.274-277
• /
• 2003

The Theory of Constraints (TOC) is an approach and a philosophy that is used to develop specific management techniques. It was first popularized by the novel, The Goal, that applied the principles to operations management. Since 1997 it has found application in two areas within project management. The first application is scheduling of a single project to reduce project duration and simplify project control. there is a further application to allocate resources that are shared by concurrent project. It is the objective of this paper to explore the fundamentals of critical chain and to pursue an application of critical chain method to construction project by a case study.

• KIEAE Journal
• /
• v.6 no.1
• /
• pp.25-32
• /
• 2006

Regarding to the Domestic housing politics to improve residing environment and effective use of country land, apartment buildings have been constructed since early of 1970s. Now apartment is taking over 50% out of entire housing in Korea. In the view point of PV application to the apartment, PV has amny advantages because of the wideness of out-walls and high floors building in APT. Therefore, if APT could use the electricity produced by BIPV, we can solve more easily environment and energy problems caused by housing. The research conclusion by analysing conditions and application method to introduce BIPV application to APT in near future is as below. -The out look of APT has been developed periodically and recently gable roof or canopy is popular which PV installation is more favorable. -For Balcony part with double skin facade sassy window, It has a preferable condition to install on the wall depending on the window direction. -In case of shorter distance between buildings due to high ratio of outside measurement, it is more desirable to install PV on the roof than on the wall of Apartment by considering low solar altitude. -Also depending on the direction of APT building, it is more effective and productive in electricity in the broad surface of side wall of APT. -In case of superhigh floor APT where facade system is mostly double skin facade of curtain wall system, PV module can replace the traditional curtain wall and will reduce architectural materials and obtain various out look design thereof.

• Journal of Practical Engineering Education
• /
• v.6 no.1
• /
• pp.15-21
• /
• 2014

Rapidly developing mobile internet technology and extensive service of smart phones have led to growing use of mobile applications. It is natural that software developers and IT-related students develop a variety of applications that can be used for everyday life. The present paper reports a case of developing such an application that was developed in a capstone design course of Department of Computer Science at Namseoul University. This so-called 'Application for Prevention of Loss of One's Belongings' was designed to let students learn a set of tools based on Android operation system. This app can prevent smart phone users from losing their belongings using an alarm. The educational effect from the process of developing this application is also discussed.

• The Journal of Internal Korean Medicine
• /
• v.40 no.3
• /
• pp.557-565
• /
• 2019

Objectives: This study investigated the effect of local acupuncture point stimulation and the application of a topical herbal mixed heating cream in a chronic cough patient who had not responded to various medications for more than a few months. Methods: An 81 year-old female patient who was suspected to be suffered from Upper Airway Cough Syndrome (UACS) was examined. The patient was treated with local acupuncture point stimulation and the application of a topical herbal mixed heating cream. We used the Leicester Cough Questionnaire, Cough-Specific Quality-of-Life Questionnaire, and Verbal Numerical Rating Scale to assess the patient's respiratory symptoms. Results: Local acupuncture point stimulation and the application of a topical herbal mixed heating cream resulted in the improvement of cough symptoms. The quality of life due to the alleviation of symptoms also significantly improved. Adverse effects were not observed. Conclusions: This study suggests that local acupuncture point stimulation and the application of a topical herbal mixed heating cream may be an effective therapy for the treatment of chronic cough in patients with UACS.

• Korea Trade Review
• /
• v.44 no.6
• /
• pp.285-302
• /
• 2019

Good faith is difficult to define due to the facts that there is not an objective and concrete concept of good faith, and good faith in contracts for the international sale of goods is a principle that parties to the contract must act with sincerity as members of a social community. The Korean Supreme Court shall pay attention to setting the applicable standards that can be universally applied to good faith based on the self-established criteria. Through such effort, it is possible not only to realize the value of concrete validity pursued by the general clause of good faith but also to realize the value of legal stability by assuring the predictability of results when applying good faith. In the modern sense, it can be said that the arbitrary application of general rules rather than the escape and general clauses is a problematic situation in the application of good faith, but this problem can be solved by setting a reasonable standard of good faith. This paper studies good faith in the view of Korean law, international laws, and related cases in contract law. The purpose of this paper is to find the problems and solutions of the practical application of good faith by analyzing the Korean case (2009Da86000), which undermined the legal stability of good faith in Korea.

• Journal of Environmental Impact Assessment
• /
• v.19 no.1
• /
• pp.49-57
• /
• 2010

The objective of the research is to analyze changing trend of water discharge in precipitation, according to changing land use, through an environment-friendly urban development method called LID. The study chose S1 basin (Separated Sewer districts) in Cheongju region for survey. Among LID methods, relatively more applicable methods of green rooftop space and parking lot with permeable material were selected to construct plausible scenarios. Curve Number (CN) value was calculated due to land use patterns in each scenario, and SWMM model simulation were conducted during 2008 for comparative analysis. For Case 1, only parking lot with permeable material was applied to the scenario. Green rooftop space I and II were applied to Case 2 and 3 respectively. For Case 4 and 5, green rooftop space I and II were applied, in addition to parking lot with permeable material, Calculation of CN value showed that for S1 basin, the value was 88.1 (prior to scenario application), 86.5 (Case 1), 81.9 (Case 2), 68.5 (Case 3), 80.4 (Case 4) and 67.2 (Case 5). Changing pattern of rain water discharge was analyzed for each scenario. For Case 1, the change was not remarkable before and after application of scenario. In Case 2 and 4, the impact of rain water discharge as source of pollutant fell to 20~30%. The rate dropped to 30~50% in Case 3 and 5 respectively. The result demonstrates that the amount of rain water discharge, amount and frequency of sewer overflow, frequency of rain water discharge, and pollution load decreased in accordance with declining CN value in each scenario. In installing green rooftop space, the effect was twice greater when rain water discharge was directly infiltrated into soil.

• Journal of Internet Computing and Services
• /
• v.17 no.5
• /
• pp.89-95
• /
• 2016

In a software testing domain, test case prioritization techniques improve the performance of regression testing, and arrange test cases in such a way that maximum available faults be detected in a shorter time. User-sessions and cookies are unique features of web applications that are useful in regression testing because they have precious information about the application state before and after making changes to software code. This approach is in fact a user-session based technique. The user session will collect from the database on the server side, and test cases are released by the small change configuration of a user session data. The main challenges are the effectiveness of Average Percentage Fault Detection rate (APFD) and time constraint in the existing techniques, so in this paper developed an intelligent framework which has three new techniques use to manage and put test cases in group by applying useful criteria for test case prioritization in web application regression testing. In dynamic weighting approach the hybrid criteria which set the initial weight to each criterion determines optimal weight of combination criteria by evolutionary algorithms. The weight of each criterion is based on the effectiveness of finding faults in the application. In this research the priority is given to test cases that are performed based on most common http requests in pages, the length of http request chains, and the dependency of http requests. To verify the new technique some fault has been seeded in subject application, then applying the prioritization criteria on test cases for comparing the effectiveness of APFD rate with existing techniques.