• Korean Institute of Interior Design Journal
• /
• no.17
• /
• pp.60-64
• /
• 1998

The results of simulation on greenery ratio using CG are as follows: arrangement type of optimal condition and greenery ratio were summarized as below as dispersion type and 5% ratio greenery for 20 pairs of assessment items and these assessment items were classified into 5 factors as a result of factor analysis,. These factors were Harmony Animation Atmosphere texture Peculiarity. Verification results of factors differences according to each condition can be. there was no apparent difference among factors in accordance with gender, In case of arrangement type dispersion type was higher than concentration type in all factors. Based on the above results dispersion type was assessed higher than concentration type the most suitable condition of Harmony Factor was 5% dispersion type Animation Factor was 5% dispersion type Animation Factor was 7% dispersion type Atmosphere Factor was 10% dispersion type Texture Factor was 5% concentration type and $\ulcorner$Peculiarity Factor$\lrcorner$was 7% concentration type.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.4
• /
• pp.341-346
• /
• 1998

Optimization for the production of Pest an was followed by the Plackett-Burman Design, using modified Czapek-dox medium as the starting point. At the flask level, $K_2HPO_4$, $MgSO_4{\cdot}7H_2O$, and aeration variables positively affected the Pestan production, DCW (dry cell weight), apparent viscosity, and flocculating activity response. KCI and $FeSO_4{\cdot}7H_2O$ negatively affected the Pestan production, DCW, apparent viscosity, and flocculating activity response. Aeration variable was shown to have a positive effect on only the flocculating activity response among Pestan production, DCW, and apparent viscosity responses. In comparison of the positive and negative variables media conditions, Pestan production and flocculating activity differed by about 9 and 125 times, respectively. In particular, at the jar fermentor level, the aeration variable was the most important factor of the all responses (pestan production, DCW, apparent viscosity, flocculating activity, and anionic charge density). The flocculating activity and apparent viscosity of Pestan were closely related to the molecular chain length and charge density.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.5
• /
• pp.433-441
• /
• 1995

A series of experiments was conducted to determine the influence of various pepsin-HCL pretreatment factor, hereby the factors of duration of washing for the retrieved bags, inherent to the mobile nylon bag technique (MNBT), on apparent ileal digestibility of crude protein (AIDCP) and apparent ileal digestibility of dry matter (AIDDM). At last, the AIDCP and apparent ileal digestibility of amino acids (AIDAA) in maize, barley, wheat, rapeseed meal, cottonseed meal and three mixed diets were determined with the MNBT and ileo-rectal anastomis pigs (IRAT). For the MNBT techniques, bag measuring $25{\times}40$ MM and containing 0.75 g feedstuff samples, after pre-digestion in vitro, were introduced into the ileo-rectal anastomis pigs (IRAT) gastrointestinal tract through a duodenal cannula and recovered in the ileal digesta between 6 and 12 h. later. 1. The apparent ileal digestibility of dry matter (AIDDM) and crude protein (AIDCP) of the tested samples, with the exception of fish meal, determined by MNBT were not affected by the different pepsin-HCL pretreatment times in vitro between 2.5 h. and 4 h. 2. There was no significant (p > 0.05) difference of the AIDCP and AIDDM of maize determined by the MNBT among different pepsin concentration (0.03%, 0.07% and 0.1 %) treatment in vitro. 3. The AIDCP determined with the MNBT was affected by the washed and unwashed recovered bags from the ileal digesta. 4. The AIDCP and AID amino acids (AIDAA) of maize, barley, wheat, rapeseed meal, soya-bean meal, cottonseed meal and three mixed diets from the MNBT, with a solution of 0.01N HCL (PH 2) and 0.1% of pepsin concentration, a pepsin-HCL pretreatment time in vitro or 4h. and a washing time of the recovered bag from the ileal digesta compared well with those from the IRAT. The linear regression analysis showed a significant correlation (p < 0.01) of AIDCP and AIDDA between the IRAT and MNBT.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.91-105
• /
• 2015

In the current work, a series of three-dimensional (3D) finite element analyses have been performed to study the effects of the locations of pile tips on the behaviour of single piles to adjacent tunnelling. In the numerical modelling, several key issues, such as tunnelling-induced pile head settlements, axial pile forces, interface shear stresses and apparent factors of safety have been studied. When the pile tips are inside the influence zone which considers the relative pile tip location with respect to the tunnel position, tunnelling-induced pile head settlements are larger than those computed from the greenfield condition. However, when the pile tips were outside the influence zone, an opposite trend was observed. When the pile tips were inside the influence zone, tunnelling-induced tensile pile forces developed; however, when the pile tips were outside the influence zone, tunnelling-induced compressive pile forces were mobilised, associated with larger settlements of the surrounding soil than the pile settlements. It has been shown that the increases in the tunnelling-induced pile head settlements have resulted in reductions of the apparent factor of safety by about 50% when the pile tips are inside the influence zone, therefore severly affecting the serviceability of piles. The pile behaviour, when considering the location of pile tips with regards to the influence zone, has been analysed in great detail by taking the tunnelling-induced pile head settlements, axial pile force and apparent factor of safety into account.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.400-406
• /
• 2023

In this study, the relationship between the material properties and air permeability characteristics was examined, an experimental method to analyze the air permeability characteristics was presented, and experimental results were derived. The effects of compressive strength and apparent density of hardened concrete on air permeability characteristics were evaluated experimentally. Focusing on the mix proportions used in nuclear power plant concrete structures, concrete test specimens were manufactured and air permeability characteristics were measured according to changes in binder, maximum aggregate size, and water-binder ratio. The apparent density was over 2,400 kg/m³ for the OPC mix and the FA-35 mix, and the air permeability for both mixes were low, in the range of 0.1-0.2 L/min. On the other hand, in the case of the combination of FA-40, FA-45, and FA-M, the apparent density was measured to be less than 2,400 kg/m³ and the air permeability was measured to be more than 0.3 L/min, experimentally verifying that the apparent density is an important factor in air permeability characteristics.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.6
• /
• pp.423-427
• /
• 2004

A simple purification procedure of bioactive human granulocyte macrophage colony stimulating factor (hGM-CSF) secreted in rice cell suspension culture has previously been described. In this study the protein was purified to apparent homogeneity with an overall yield of $80.1\%$ by ammonium sulfate precipitation and a single chromatographic step involving FPLCanion exchange chromatography. The purified hGM-CSF revealed at least five glycosylated forms ranging from $21.5{\~}29$ kDa, and its biological activity was independent of the glycosylation pattern. This is the first purification report of recombinant hGM-CSF to apparent homogeneity from rice cell suspension cultures.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.4
• /
• pp.589-595
• /
• 2014

The error of instrument transformers is measured by connecting the external burden with the secondary terminal of the instrument transformers. Because the error of transformer is affected by the apparent power and power factor of the external burden, an accurate measurement of burden is important for transformer evaluation. We have developed the burden evaluation equipment for both potential transformer and current transformer by employing the series resistor in the range of $20m{\Omega}{\sim}5{\Omega}$ and the parallel resistor in the range of $1M{\Omega}{\sim}500{\Omega}$, respectively, together with visual basic program. We could reduce testing time more than 5 times by employing method developed in this study, compared with that developed in past. This method shows more better reliability by analyzing the evaluation results and fitting graphs of burden measurements. The test results of the developed system is compared with those obtained in the power meter analyzer to verify the validity.

• Applied Biological Chemistry
• /
• v.18 no.2
• /
• pp.56-60
• /
• 1975

A rapid method for the measurement of the absolute activity of carbon-14 in cotyledons and root of etiolated pea seedlings has been developed. Fresh tissue was frozen in liquid air, ground and suspended in gel phosphor and subjected to measurement for its radioactivity by liquid scintillation counter. Apparent activity of the suspended tissue sample calculated by counting efficiency value obtained by internal standardisation, was found to be related to absolute activity of the tissue, determined by flask combustion technique, by a constant factor. Once this factor is determined experimentally, analysis of C-14 lebelled tissue involves only fairly simple suspension counting by liquid scintillation counter. Present method appears to be applicable to other tissues tagged with C-14.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.26-32
• /
• 1998

The grinding force generated during the grinding process causes an elastic deformation of the workpiece, grinding wheel, and machine system. Thus, the true depth of cut is always smaller than the apparent depth of cut. This is known as machining elasticity phenomenon. The machining elasticity parameter is defined as a ratio between the true depth of cut and the apparent depth of cut. It is an important factor to understand the material removal mechanism of the grinding process. To increase productivity, the value of this machining elasticity parameter must be large. Therefore, it is essential to know the characteristics of this parameter. The objective of this research is to study the effect of the major grinding conditions, such as table speed and depth of cut, on this parameter experimentally. Through this research, it is found that this parameter value is increasing when the table speed is decreasing or the depth of cut is increasing. Also, this parameter value depends on the grinding mode (up grinding, down grinding).

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.702-704
• /
• 2001

This paper investigates efficiency and power factor of Switched Reluctance Motor (SRM) using Finite Element Method considered driving circuit. The efficiency and power factor are calculated in Input terminal and Output terminal respectively. When calculating power factor, apparent power is obtained by effective voltage and current because SRM is operated by switching of driving circuit. Efficiency is calculated by mechanical output and active power. Finally, the characteristics of efficiency and power factor in three proposed models are compared due to the switching pattern.