• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.197-204
• /
• 1993

This study was conducted to evaluate and compare the apical leakage in the following retrofilling techniques after apical resection; No apical cavity preparation and no retrofilling(control group), Amalgam(group I) or silver glass ionomer cement(group II) retrofilling after apical cavity preparation with mini contra-angle and bur, Amalgam(group III) or silver glass ionomer cement(group N) retrofilling after apical cavity preparation with ultrasonic micro endo tip. Extracted ninety upper anterior and lower canine teeth were fixed in skull simulators and root canals were prepared with step-back method and obturated with gutta-percha and zinc oxide eugenol sealer. Obturated roots were resected 2mm from apical ends and apical cavities of 1mm width and 2mm depth were prepared and retrofilled by above mentioned methods. After application of nail varnish on all surface except resected surface, apical 1/3 of the roots were placed in 1% methylene blue solution for 3 days. After longutudinal sectioning to expose central parts of filled materials, depths of penetrated dye were measured by measuring microscope and were analyzed statistically. The results were as follows. 1. Having no relation with instruments used in apical cavity preparation, amalgam retrofilling groups(group I and II) showed less apical leakage which was not significant statistically than no retrofilling group(control group) (P<0.05), but silver glass ionomer cement retrofilling gruoups(group II and IV) showed significantly less apical leakage than no retrofilling group(control group) (P<0.01). 2. In the groups retrofilled with the same material, the apical leakage in cavities prepared with ultrasonic micro endo tip (group III and IV) was less than that in cavities prepared with mini contra-angle and bur(group I and II), but not significant statistically(P>0.05). 3. When apical cavities were prepared with same instrument. the egroups retrofilled with silver glass ionomer cement(group II and IV) showed significantly less apical leakage than the groups retrofilled with amalgam(group I and III)(<0.01).

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.4
• /
• pp.299-307
• /
• 2000

A large amount of information is currently available for somatic embryogenesis of plants. However, one common problem related to somatic embryos is that the conversion rate can be low for some species. Apical meristems are responsible for post-embryonic growth of the embryo. The low percentage observed is most likely a result of poor apical meristem development or defects in the meristem organization during somatic embryogenesis. In flowering plants, apical meristems are well developed by the late heart stage of zygotic embryo development. In conifers, such as white spruce, apical meristems are formed at the pre-cotyledon stage. Thus, apical meristem development occurs very early, prior to the maturation stage of embryo development. Once formed, meristems are stably determined. In the somatic embryo, as exemplified by white spruce, since embryo development is not synchronous, tissue differentiation including apical meristem formation occurs throughout the“maturation”stage. Different apical meristem organizations can be found among different individuals within a population. In contrast to their zygotic counterparts, the apical meristems appear not to be stably determined as their organization, as the shoot apical meristem especially, can be easily modified or disrupted. Precocious germination seldom results in functional plantlets. All these observations suggest that the conditions for somatic embryo maturation have not been optimized or are not suitable for meristem formation and development. The following strategies could improve meristem development and hence conversion: 1. Simulate in ouuio conditions to promote meristem development prior to the“maturation”treatment.2. Prevent deterioration of apical meristem organization during somatic embryo maturation.3. Promote further meristem development during embryo germination.

• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.332-341
• /
• 2017

Objectives: To determine the incidence of crack formation and propagation in apical root dentin after retreatment procedures performed using ProTaper Universal Retreatment (PTR), Mtwo-R, ProTaper Next (PTN), and Twisted File Adaptive (TFA) systems. Materials and Methods: The study consisted of 120 extracted mandibular premolars. One millimeter from the apex of each tooth was ground perpendicular to the long axis of the tooth, and the apical surface was polished. Twenty teeth served as the negative control group. One hundred teeth were prepared, obturated, and then divided into 5 retreatment groups. The retreatment procedures were performed using the following files: PTR, Mtwo-R, PTN, TFA, and hand files. After filling material removal, apical enlargement was done using apical size 0.50 mm ProTaper Universal (PTU), Mtwo, PTN, TFA, and hand files. Digital images of the apical root surfaces were recorded before preparation, after preparation, after obturation, after filling removal, and after apical enlargement using a stereomicroscope. The images were then inspected for the presence of new apical cracks and crack propagation. Data were analyzed with ${\chi}^2$ tests using SPSS 21.0 software. Results: New cracks and crack propagation occurred in all the experimental groups during the retreatment process. Nickel-titanium rotary file systems caused significantly more apical crack formation and propagation than the hand files. The PTU system caused significantly more apical cracks than the other groups after the apical enlargement stage. Conclusions: This study showed that retreatment procedures and apical enlargement after the use of retreatment files can cause crack formation and propagation in apical dentin.

• Journal of Yeungnam Medical Science
• /
• v.27 no.2
• /
• pp.133-138
• /
• 2010

Apical hypertrophic cardiomyopathy is rare disease and a variant of hypertrophic cardiomyopathy with prevalence of 1 in 500 in the general population. Apical hypertrophic cardiomyopathy with apical aneurysm and intramural thrombus is extremely rare. We report a case of apical hypertrophic cardiomyopathy progressing to left ventricular apical aneurysm with intramural thrombus diagnosed by contrast echocardiography.

• Restorative Dentistry and Endodontics
• /
• v.36 no.1
• /
• pp.59-65
• /
• 2011

Objectives: The purpose of this study is to compare the apical transportation and working length change in curved root canals created in resin blocks, using 3 geometrically different types of Ni-Ti files, K3, NRT, and Profile. Materials and Methods: The curvature of 30 resin blocks was measured by Schneider technique and each groups of Ni-Ti files were allocated with 10 resin blocks at random. The canals were shaped with Ni-Ti files by Crown-down technique. It was analyzed by Double radiograph superimposition method (Backman CA 1992), and for the accuracy and consistency, specially designed jig, digital X-ray, and CAD/CAM software for measurement of apical transportation were used. The amount of apical transportation was measured at 0, 1, 3, 5 mm from 'apical foramen - 0.5 mm' area, and the alteration of the working length before and after canal shaping was also measured. For statistics, Kruskal-Wallis One Way Analysis was used. Results: There was no significant difference between the groups in the amount of working length change and apical transportation at 0, 1, and 3 mm area (p = 0.027), however, the amount of apical transportation at 5 mm area showed significant difference between K3 and Profile system (p = 0.924). Conclusions: As a result of this study, the 3 geometrically different Ni-Ti files showed no significant difference in apical transportation and working length change and maintained the original root canal shape.

• Restorative Dentistry and Endodontics
• /
• v.38 no.2
• /
• pp.59-64
• /
• 2013

Apical surgery cuts off the apical root and the crown-to-root ratio becomes unfavorable. Crown-to-root ratio has been applied to periodontally compromised teeth. Apical root resection is a different matter from periodontal bone loss. The purpose of this paper is to review the validity of crown-to-root ratio in the apically resected teeth. Most roots have conical shape and the root surface area of coronal part is wider than apical part of the same length. Therefore loss of alveolar bone support from apical resection is much less than its linear length.The maximum stress from mastication concentrates on the cervical area and the minimum stress was found on the apical 1/3 area. Therefore apical root resection is not so harmful as periodontal bone loss. Osteotomy for apical resection reduces longitudinal width of the buccal bone and increases the risk of endo-perio communication which leads to failure. Endodontic microsurgery is able to realize 0 degree or shallow bevel and precise length of root resection, and minimize the longitudinal width of osteotomy. The crown-to-root ratio is not valid in evaluating the prosthodontic prognosis of the apically resected teeth. Accurate execution of endodontic microsurgery to preserve the buccal bone is essential to avoid endo-perio communication.

• Restorative Dentistry and Endodontics
• /
• v.46 no.1
• /
• pp.14.1-14.7
• /
• 2021

Objectives: The aim of this study was to evaluate the apical pressure generated by 2 endodontic irrigation needles and the GentleWave system in mandibular molars. Materials and Methods: The mesial and distal root canals of 12 mandibular molars were irrigated with a 30-gauge close-end needle or with a 30-gauge open-end needle. Procedures were performed in the mesial and distal canals. The GentleWave procedure and irrigation at 1 mm from the apex in the distal roots using an open-end needle were used, respectively, as negative and positive controls. The apical pressure was measured using a data acquisition pressure setup. Apical pressure exerted by the different needles in the 2 different canal types was statistically compared using 2-way analysis of variance. Results: Significant differences were found in the apical pressure for both needles and the canal type. The lowest values were obtained with close-end needles and in mesial canals. Negative apical pressure values were obtained using GentleWave. Conclusions: The needle and the canal type influenced the apical pressure. The GentleWave procedure produced negative apical pressure.

• ALGAE
• /
• v.21 no.3
• /
• pp.323-332
• /
• 2006

Mitochondrial distribution and abundance were assessed during the growth of apical and subapical cells in the red algae Colaconema caespitosum (J. Agardh) Jackelman, Stegenga and Bolton and Antithamnion cruciatum (C. Agardh) Nägeli after staining with 3,3’-dihexyloxacarbocyanine iodide [DiOC6(3)] and 2,4’-dimethylaminostyryl-Nethylpyridinium iodide (DASPEI). In fully elongate apical cells of C. caespitosum there were 100-120 mitochondria. During apical cell enlargement and division there is a doubling and then halving of the mitochondrial numbers. Apical cells prior to cytokinesis in young filaments are smaller than in mature filaments (ca. 50 and 100 μm long, respectively) and have fewer mitochondria (ca. 100 and 120 mitochondria per cell, respectively). In older vegetative cells mitochondria tend to aggregate at opposite ends of the cells with some mitochondria associated with the central nucleus or at points of apparent branch initiation. There is a greater density of mitochondria in apical cells of smaller versus larger plants (one mitochondrion per 6.3 μm3 and 9.8 μm3, respectively), suggesting that apical cells of younger plants may be more metabolically active. Male and female gametophytic thalli of Antithamnion cruciatum had similar numbers of mitochondria in apical cells of indeterminate axes, as did gametophytic and sporophytic thalli. There were about 40-50 mitochondria in fully elongated apical cells with about half this number in newly divided apical and subapical cells. Apical cells of determinate branches had more mitochondria (60-77) than indeterminate branches (60-70 vs. 40-50). In both species and in all cell types mitochondrial numbers were highly correlated with cell size.

• Restorative Dentistry and Endodontics
• /
• v.9 no.1
• /
• pp.51-57
• /
• 1983

64 multi-rooted teeth (198 canals) were tested in vitro to evaluate the apical seal produced by the single cone filling and lateral condensation with sealer and without sealer. The obturated teeth were immersed in India ink, decalcified, and cleared. The degree of ink penetrated into the canal provided a measure of the apical seal. The results were as follows: 1. The lateral condensation with sealer provided statically less apical leakage than the other obturating techniques used in this study. 2. The single cone filling provided good apical sealing. 3. The lateral condensation without sealer provided most apical leakage than any other techniques used in this study. 4. The degree of apical leakage was not related to the visual appearence of the adaptation of the gutta percha filling in cleared teeth.

• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.919-929
• /
• 2016

This study investigated the effect of organic materials (Bordeaux, Loess-sulfur) and the removal of apical shoot against downy mildew disease on cucumber cultivated in greenhouse. Five kinds of Bordeaux were made by adjusting mixing ratio of lime and copper sulfate in order to elucidate the optimal combination. The 4-6type Bordeaux was selected as the most effective combination for controlling cucumber downy mildew. Loess-sulfur showed inhibitory activity against cucumber downey mildew, but it was less effective than Bordeaux. It was confirmed that apical shoot cutting could reduce the incidence of cucumber downy mildew disease by 56.3%. When apical shoots of susceptible cucumber variety were cut at different leaf stages, disease incidence by early apical shoot cutting treatment was lower than that of late apical shoot cutting treatment. However in a resistant variety, 'Heukryungsamcheok', disease incidences of all cucumber apical shoot cutting treatments were lower than that of non-cutting treatment, but there was no differences between apical shoot cutting treatments due to low disease incidences. In addition, when organic materials and apical shoot cutting treatment were carried out in parallel, the combined treatments of organic materials and apical shoot cutting showed low disease incidence of cucumber downy mildew compared to untreated control. The lowest disease incidence of cucumber downy mildew was recorded in the combined treatment of 4-6type Bordeaux and apical shoot cutting. This study confirmed that apical shoot cutting can reduce the disease incidence of cucumber downy mildew and the combined treatment of apical shoot cutting and organic materials showed higher suppressive effect against cucumber downy mildew.