• Nuclear Engineering and Technology
• /
• 제39권4호
• /
• pp.287-298
• /
• 2007

As part of the $AP1000^{TM}$ pressurized water reactor design certification program, a series of integral systems tests of the nuclear steam supply system was performed at the APEX-1000 test facility at Oregon State University. These tests provided data necessary to validate Westinghouse safety analysis computer codes for AP1000 applications. In addition, the tests provided the opportunity to investigate the thermal-hydraulic phenomena expected to be important in AP1000 small-break loss of coolant accidents (SBLOCAs). The APEX-1000 facility is a 1/4-scale pressure and 1/4-scale height simulation of the AP1000 nuclear steam supply system and passive safety features. A series of eleven tests was performed in the APEX-1000 facility as part of a U.S. Department of Energy contract. In all, four SBLOCA tests representing a spectrum of break sizes and locations were simulated along with tests to study specific phenomena of interest. The focus of this paper is the SBLOCA tests. The key thermal-hydraulic phenomena simulated in the APEX-1000 tests, and the performance and interactions of the passive safety-related systems that can be investigated through the APEX-1000 facility, are emphasized. The APEX-1000 tests demonstrate that the AP1000 passive safety-related systems successfully combine to provide a continuous removal of core decay heat and the reactor core remains covered with considerable margin for all small-break LOCA events.

• Clinics in Shoulder and Elbow
• /
• 제21권4호
• /
• pp.179-185
• /
• 2018

Background: We analyzed the angle between the glenoid anterior surface and glenoid axis, the range of the glenoid apex and the location of the glenoid apex for assistance during shoulder surgery. Methods: Sixty-two patients underwent a computed tomography of the shoulder with a proximal humerus fracture. In the range of the glenoid apex, the ratios of the distribution of triangles with a Constant anterior and posterior area of the glenoid were measured. The location of glenoid apex was confirmed as the percentage of the position with respect to the upper part of the glenoid with the center of the part, analyzed the angle between the glenoid anterior surface and glenoid axis was measured. Results: The angle between the glenoid anterior surface and glenoid axis was $19.80^{\circ}{\pm}3.88^{\circ}$. The location of the glenoid apex is $60.36%{\pm}9.31%$, with the upper end of the glenoid as the reference. The range of the glenoid apex was $21.16%{\pm}4.98%$. When the height of the glenoid becomes smaller, the range of the glenoid apex tends to become larger (p=0.001) and the range of the glenoid apex becomes wider (p=0.001) as the glenoid width narrows. Conclusions: We believe the anatomical measurements of the glenoid will be helpful for a more accurate insertion in glenoid component. It is thought that more accurate insertion is possible if we can set other anatomical measurements using computed tomography imaging of the glenoid which can develop into the study of other anatomical measurements.

• 대한수의학회지
• /
• 제36권2호
• /
• pp.255-264
• /
• 1996

This studies were carried out to identify the characteristics of the tongue of Korean native goat(Capra hircus) by macroscopy, microscopy and scanning microscopy. Korean native goat had torus linguae, median lingual sulcus, lingual fossa and ventral median fissure but did not have glossoepiglottic fold and terminal sulcus in the tongue. The whole length of tongue was $11.51{\pm}0.76cm$. The length of tongue apex, tongue body, tongue root and the torus linguae were $2.62{\pm}0.28$, $7.39{\pm}0.27$, $1.56{\pm}0.26$ and $6.37{\pm}0.29cm$, respectively. The width of tongue apex, torus linguae and tongue root were $3.41{\pm}0.24$, $3.74{\pm}0.29$ and $3.68{\pm}0.11$, respectively. The thickness of tongue apex was $1.60{\pm}0.10$, and the height of torus linguae was $1.52{\pm}0.15cm$. Filiform papillae were present at the tongue apex and the tongue body rostral to torus linguae. Fungiform papillae were scattered from tongue apex to rostral portion of torus linguae, being in abundance at the tongue apex. Vallate papillae were showed at the lateral portion of torus linguae, while lentiform papillae were present at its central portion. Conical papillae were located between vallate and lentiform papillae. The numbers of filiform, fungiform, conical, vallate and lentiform papillae were $46,980{\pm}1070.98$, $446.8{\pm}36.97$, $818.4{\pm}43.99$, $34.8{\pm}2.77$, and $255.6{\pm}39.30$, respectively. The average numbers of taste bud were $8.3{\pm}2.04$ in a fungiform papilla and $247.3{\pm}37.44$ in a vallate papilla. The filiform papilla had secondary and tertiary papillae. The height of filiform papilla was about $150{\mu}m$ and the diameter was $100{\mu}m$. The diameters of fungiform papillae were 350 to $550{\mu}m$. The long and short diameters of maximum-sized lentiform papilla were 4000 and $3000{\mu}m$, respectively, while those of minimum-sized papilla were 700 and $600{\mu}m$, respectively. The height of conical papillae was 450 to $600{\mu}m$ and diameter was 250 to $450{\mu}m$. The vallate papilla was round or oval in shape and its diameter was 500 to $850{\mu}m$. It had well-developed papillary groove around itself. The modified conical papillae were not observed in the tongue of Korean native goat.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제19권2호
• /
• pp.113-125
• /
• 2016

초등학교 수학 교과서에 제시된 도형의 높이 개념과 측정 활동은 관련 도형의 넓이와 부피를 구하는데 필수적이다. 교과서에서 평면 도형의 높이에서 삼각형은 밑변과 마주보는 꼭짓점에서 밑변에 수직으로 그은 선분, 평행사변형과 사다리꼴은 두 밑변 사이의 거리로 서술되었다. 또한 입체 도형의 높이에서 각기둥은 두 밑면 사이의 거리, 각뿔은 꼭짓점에서 밑면에 수직인 선분, 원뿔은 꼭짓점에서 밑면에 수직인 선분의 길이, 원기둥은 두 밑면에 수직인 선분의 길이로 서술되었다. 본 논문에서는 이러한 높이 개념과 측정 활동에서 나타나는 문제점을 분석하여 방안을 제시하고, 이를 바탕으로 수학 교수 학습에서의 시사점을 도출하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.203-206
• /
• 2009

Articulation Index(AI) is the one of the evaluating methods for the interior sound of the automobiles. The AI measures the articulation level of the sound in the vehicle cabin as passengers talk to another. In this study, the effects of AI were investigated according to the various structures of tire. As the structures of tire were changed, the road noise of the vehicle tire was measured using objective measurement. From this measurement data, the AI was calculated. The AI of front is larger than that of rear. Increasing the tread hardness of tire or decreasing the apex height the AI is improved.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.345-359
• /
• 2006

Loss of maxillary molar teeth leads to rapid loss of crestal bone and inferior expansion of the maxillary sinus floor (secondary pneumatization). Rehabilitation of the site with osseointegrated dental implants often represents a clinical challenge because of the insufficient bone volume resulted from this phenomenon. Boyne & James proposed the classic procedure for maxillary sinus floor elevation entails preparation of a trap door including the Schneiderian membrane in the lateral sinus wall. Summers proposed another non-invasive method using a set of osteotome and the osteotome sinus floor elevation (OSFE) was proposed for implant sites with at least 5-6mm of bone between the alveolar crest and the maxillary sinus floor. The change of grafted material in maxillary sinus is important for implant survival and the evaluation of graft height after maxillary sinus floor elevation is composed of histologic evaluation and radiomorphometric evaluation. The aim of the present study was radiographically evaluate the graft height change after maxillary sinus floor elevation and the influence of the graft material type in height change and the bone remodeling of grafts in sinus. A total of 59 patients (28 in lateral approach and 31 in crestal approach) who underwent maxillary sinus floor elevation composed of lateral approach and crestal approach were radiographically followed for up to about 48 months. Change in sinusgraft height were calculated with respect to implant length (IL) and grafted sinus height(BL). It was evaluated the change of the graft height according to time, the influence of the approach technique (staged approach and simultaneous approach) in lateral approach to change of the graft height, and the influence of the type of graft materials to change of the graft height. Patients were divided into three class based on the height of the grafted sinus floor relative to the implant apex and evaluated the proportion change of that class (Class I, in which the grafted sinus floor was above the implant apex; Class II, in which the implant apex was level with the grafted sinus floor; and Class III, in which the grafted sinus floor was below the implant apex). And it was evaluated th bone remodeling in sinus during 12 months using SGRl(by $Br\ddot{a}gger$ et al). The result was like that; Sinus graft height decreased significantly in both lateral approach and crestal approach in first 12 months (p$MBCP^{TM}$ had minimum height loss. Class III and Class II was increased by time in both lateral and crestal approach and Class I was decreased by time. SGRI was increased statistically significantly from baseline to 3 months and 3 months(p<0.05) to 12 months(p$ICB^{(R)}$ single use, more reduction of sinusgraft height was appeared. Therefore we speculated that the mixture of graft materials is preferable as a reduction of graft materials. Increasing of the SGRI as time goes by explains the stability of implant, but additional histologic or computed tomographic study will be needed for accurate conclusion. From the radiographic evaluation, we come to know that placement of dental implant with sinus floor elevation is an effective procedure in atrophic maxillary reconstruction.

• 대한치과보철학회지
• /
• 제31권3호
• /
• pp.303-316
• /
• 1993

The purpose of this study was to analysis the stress distribution induced by three unit PFM bridges and various cantilever bridges replacing maxillary latersal incisor. The simplified two-dimensional photoelastic models used for this study was contructed in the folio- wing way. CR/R ratio was designed to be 1 : 1, 1 : 1.25 and 1 : 1.5. The pontics of cantilever bridge supported by maxillary canines consisted of wrap-around type, rest-extension type, and simple type. 3-unit PFM bridge was constructed with traditional method. 1kg vertical static load was applied on the center of the incisal edge of the pontic. The stress pattern was examined and recorded by photography. The results obtained were as follows ; 1. The magnitude of stress on the abutment root apex area of a traditional 3-unit bridge was the lowest. 2. The model of cantilevered pontic with a rest showed the relatively well distributed stress around the abutment tooth. The model with simple pontic generated the greatest stress concentration in the supporting structure of the abutment tooth. 3. As the height of bone level reduced, the rotational and vertical force increased around the abutment tooth. 4. The stress concentration of the 3-unit bridges occured on the root apex and stress concentration of the cantilever briage occured on the root apex and cervix area, 5. In the case of the cantilever bridge, stress concentrated distally on the root apex area of the abutment tooth and additional stress was observed mesially on the upper part of the root. Especially in the case of the simple pontic, was phenomenon was more apparent than the others. 6. Force applied to cantilevered pontic was transmitted to the adjacent central incisor through the contact surface. Stress was markedly observed on the mesial cervix area in the case of simple pontic and on the root apex area in the case of wrap-around type and rest-extension type.

• 대한치과보철학회지
• /
• 제35권4호
• /
• pp.674-696
• /
• 1997

There're many cases that should be reconstructed with post and core when clinical crown is destructed. But this post and core restoration may cause damaging stress on the teeth. Previous finite element study was restricted to normal bone model relatively close to cemen-toenamel junction. Moreover, the test of a model with diminished bone support was rare. The purpose of this study is to test the effects of alveolar bone loss on the magnitude, stress distribution and displacement of post reconstructed teeth. In this study, it was assumed that the coronal portion of upper incisor was severely destructed. After conventional endodontic treatment, it was restored with post and core. The PFM restoration was made on it. This crown was cemented with ZPC. Alveolar bone was classified by 4 types of bone, such as normal, 2 mm, 4 mm, 6 mm bone, according to the bone loss. Meanwhile, the material of post are divided into 2 types of materials, such as gold, co-cr. Force was applied to two directions. One was fuctional maximum bite force (300 N) applied to the spot just lingual to the incisal edge with the angle of 45 degree to the long axis of the tooth, and the other one was horizontal force (300 N) applied to the labial surface. The results analyzed with three dimensional finite element method were as follows : 1. Stress was concentrated on the adjacent dentin of the post apex, one third portion of the post apex and the labial & lingual mid-portion of the root in all case. The stress of middle third of the root was apparently concentrated on the labial aspect. 2. The stress on adjacent dentin of the post apex and one third of the post apex increased as alveolar bone height moved apically. This increase was dramatic beyond 4 mm bone loss model. 3. The stress of the post apex was spreaded to the middle third of the post and greater than gold post in the case of metal post. 4. The displacement of the neck of post was the greatest in one of the post-cement interface and this increased as alveolar bone height moved apically. Besides the displacement of the metal post is slightly lower than one of the gold post.

• Journal of Periodontal and Implant Science
• /
• 제37권2호
• /
• pp.277-286
• /
• 2007

The edentulous posterior maxilla generally provides a limited amount of bone height because of atrophy of the ridge and pneumatization of the maxillary sinus, Maxillary sinus augmentation is one of the surgical techniques for reconstruction of the severely resorbed posterior maxilla. The purpose of this study was to evaluate the survival rate of implants and the long-term changes of graft height after maxillary sinus augmentation by lateral window approach. From September 1996 to July 2004, maxillary sinus augmentation with mixed grafts of autograft, allograft, xenograft and alloplast were performed on 45 patients and 100 implants were placed. We evaluated the survival rate of implants and the changes of BL(bone length)/IL(implant length) according to time using panoramic radiographs. The survival rate of implants was 91.0% for follow-up period. The mean reduction of graft heights was 0.34mm(3.0%) for 6 months and 1.22mm(1O.66%) for 3 years after augmentation. The total mean BL/IL was $1.34{\pm}0.21$ during 5 year observation period after augmentation and decreased slightly over time. The result means that graft materials were stable above the implant apex. BL/ILs of 1stage procedure were significantly decreased at 1-2 year, 3-4 year after augmentation and no statistically significant changes were observed in those of 2 stage procedure. The graft materials of both procedures were stable above the implant apex. No statistically significant changes of BL/IL were observed in the grafts combined with low amount of autogenous bone or without autogenous bone. The graft materials of both groups were stable above the implant apex. The results indicated that the placement of dental implants with maxillary sinus augmentation showed predictable clinical results and the grafts combined with low amount of autogenous bone or without autogenous bone had long-term resistance to resorption in maxillary sinus.

• 대한치과보철학회지
• /
• 제33권3호
• /
• pp.517-538
• /
• 1995

Dental implantation is a method restoring missing teeth, especially in the case of severely resorbed edentulous patient. But the direct contact between bone and implant surface, induces stress concentration to the bone and eventually becomes a cause. The purpose of this study was to compare the stress distribution patterns between following two cylindrical implant models. One group has implant apex located in the inferior cortical bone and the other in the cancellous bone. Anterior edentulous mandible was modeled with two dimensional 953,878 nodes, 995,918 elements and compared the deflection and stress distribution under the 70 N,4 load cases for 26 models having variant mandibular height and length. The result were as follows; 1. The stress concentration was more affected by the height of the mandible than implant length. 2. Bicortication mitigates the stress of upper cortical and cancellous bone area at the same height of the mandible 3. Perforation of the inferior mandibular cortex significant stress concentration. 4. Stud type porstheses induced less stress concentration to the cortical and cancellous bone than bar type prostheses. 5. Stress of implant apex for stud type was larger than that of bar type.