• 대한기계학회논문집
• /
• 제13권2호
• /
• pp.257-264
• /
• 1989

본 연구에서는 높은 열확산의 재료까지도 수용할 수 있도록 시편의 전면 전체를 가열하는 기존의 방법으로부터, 가열하는 시편 전면의 면적을 그 중심으로 부터 임의로 조절하여 축 및 반경방향의 열흐름을 강화시켜, 반경방향의 온도를 측정한 후 이를 이용하여 열확산계수를 구할 수 있는 방정식을 제시하였다. 방정식에서는 시편의 전.후면은 물론 열원의 방사시간도 함께 다루었다.

• 환경생물
• /
• 제20권1호
• /
• pp.78-84
• /
• 2002

The effects of light and darkness on stomatal aperture and guard cell apoplastic pH in the intact leaf and in the isolated epidermal strips of Commelina communis have been investigated. Stomata in the intact leaf opened wide in the light. In contrast, stomata in the isolated epidermal strips did not respond clearly to light. To eucidate the relationship between the stomatal aperture and the guard cell apoplastic pH, apoplastic pH was measured. In the light the guard cell wall of intact leaf was acidified by pH 1.9 units, falling from pH 7.3 to pH 5.4 in the first 10 minutes. On the contrary, apoplastic pH of isolated epidermal strips changed slowly from pH 7.3 to pH 6.9 at 20 min. Stomata in the intact leaf closed rapidly in the dark. On the other hand, stomata in the isolated epidermal strips failed to close in dark. There was a slow increase in apoplastic pH on transfer to the dark after incubation for 1.5 h in the light and the level observed before the experiment was regained after around 40 min. When the isolated epidermal strips were transferred to the dark, apoplastic pH maintained a uniform level of around pH 7.2-7.4. These results indicate that the mechanism of stomatal opening and closing from isolated epidermal strips and intact leaves could be different.

• Journal of the Optical Society of Korea
• /
• 제19권5호
• /
• pp.437-443
• /
• 2015

In this paper, we analyze the performance of the all-optical multihop radio over a free space optical (RoFSO) communication system with amplify-and-forward (AF) relays under varying weather conditions. The proposed channel model considers the propagation loss, attenuation and atmospheric fading modeled by the Gamma-Gamma (GG) distribution. Both the amplified spontaneous emission (ASE) noise in the all-optical relays and the background noise projected onto receiver apertures have been considered in the analysis. The lower bound analytical expressions for the end-to-end bit error rate (BER) and outage probability are derived for the multihop system employing the all-optical relays with the full channel state information (CSI). Meanwhile, the exact results for BER and outage probability are obtained via Monte Carlo simulation. Results indicate the performance of the proposed system will be improved by the multihop transmission technology. For a fixed number of relays, the BER and outage probability will be increased with the deterioration of the weather conditions.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1314-1319
• /
• 2006

This paper describes the novel fabrication method of the high-aspect-ratio nano structure which is impossible by conventional method using a shadow mask and a Deep X-ray Lithography (DXRL). The shadow mask with $1{\mu}m-sized$ apertures is fabricated on the silicon membrane using a conventional UV-lithography. The size of aperture is reduced to 200nm by accumulated low stress silicon nitride using a LPCVD (low pressure chemical vapor deposition) process. The X-ray mask is fabricated by depositing absorber layer (Au, $3{\mu}m$) on the back side of nano shadow mask. The thickness of an absorber layer must deposit dozens micrometers to obtain contrast more than 100 for a conventional DXRL process. The thickness of $3{\mu}m-absorber$ layer can get sufficient contrast using a central beam stop method, blocking high energy X-rays. The nano circle and nano line, 200nm in diameter in width, respectively, were demonstrated 700nm in height with a negative photoresist of SU-8.

• 한국재료학회지
• /
• 제11권9호
• /
• pp.792-796
• /
• 2001

For electron beam lithography and SEM(scanning electron microscopy) applications, miniaturized electrostatic lenses called a microcolumn have been fabricated. In this paper, we report the fabrication technique for 20~30$\mu\textrm{m}$ apertures of electron lenses based on silicon and Mo membrane using an active Q-switched Nd:YAG laser. Experimental conditions of laser micromachining for silicon and Mo membrane are improved. The geometrical structures, such as the diameter and the preciseness of the micron-size aperture are dependent upon the total energy of the laser pulse train, laser pulse width, and the diameter of laser spot.

• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.212-216
• /
• 1997

A new metal tip fabrication process for low voltage operation is reported in this paper. The key element of the fabrication process is that isotropic silicon etching and oxidation process used in silicon tip fabrication is utilized for gate hole size reduction and gate oxide layer. A metal FEA with 625 tips was fabricated in order to demonstrate the validity of the new process and submicron gate apertures were successfully obtained from originally 1.7$\mu\textrm{m}$ diameter mask. The emission current above noise level was observed at the gate bias of 50V. The required gate voltage to obtain the anode current of 0.1${\mu}\textrm{A}$/tip was 74V and the emission current was stable above 2${\mu}\textrm{A}$/tip without any disruption. The local field conversion factor and the emitting area were calculated as 7.981${\times}$10\ulcornercm\ulcorner and 3.2${\times}$10\ulcorner$\textrm{cm}^2$/tip, respectively.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.26-32
• /
• 2012

In the present study, the stencil printing process using solder paste are numerically analyzed. The key design parameters in the stencil printing process are the printing conditions, stencil design, and solder paste properties. Among these parameters, the effects of printing conditions including the squeegee angle and squeegee pressure are investigated through finite element (FE) analysis. However, the FE analysis for the stencil printing process requires tremendous computational loads and time because this process carries micro-filling through thousands of micro-apertures in stencil. To overcome this difficulty in simulation, the present study proposes a two-step approach to sequentially perform the global domain analysis and the local domain analysis. That is, the pressure development under the squeegee are firstly calculated in the full analysis domain through the global analysis. The filling stage of the solder paste into a micro-aperture is then analyzed in the local analysis domain based on the results of the preceding global analysis.

• 음성과학
• /
• 제9권2호
• /
• pp.25-47
• /
• 2002

Human language activity in the information society has been developing the communication system between humans and machines. The aim of this study was to analyze dialectal speech in Korea. One hundred Kyungsang and one hundred Cholla informants participated in this study. A CSL and Flexible laryngeal fiberscope were used for analysis of the acoustic and glottal gestures of all the vowels and consonants. Test words were made on the picture cards and letter cards which contained each vowel and each consonant, respectively. The dialogue between the examiner and the informants was recorded in a question and answer manner. The acoustic results of two dialects were as follows: Kyungsang and Cholla informants showed neutralization between /e/ and /$\varepsilon$. However, the apertures of Kyungsang vowels /i, w, u, o/ were higher than those of Cholla vowels. The /wi/ and /$\varepsilon$/ of Kyungsang Diphthong vowels were shown as simple vowels /i/ and /$\varepsilon$/ in Cholla dialect. The VOT of Cholla dilaect was longer than that of Kyungsang dialect. The fricative frequence of Kyurlgsang dialect was about 1000Hz higher than that of Cholla dialect. The glottal widths on fiberscopic images showed that the consonant durations of Kyungsang and Cholla dialects were correlated all together with the acoustic duration on the spectrogram.

• 한국전자파학회논문지
• /
• 제22권3호
• /
• pp.320-326
• /
• 2011

공진되는 개구와 비공진 개구로 구성되는 두 가지 형태의 FSS 구조에 대해 전부 투과되는 응답을 비교 연구하였다. 입사파가 전부 투과할 때 공진 개구의 FSS 구조는 파장 ${\lambda}$ 대 배열 주기 T의 비에 대해 비공진 개구의 FSS인 경우보다 더 큰 비를 가짐을 알 수 있었고, 또한 동작 주파수는 공진 구조를 이용함에 의해 상당히 낮출 수 있다. 이러한 물리적 상황은 현재 물리학 분야에서 널리 연구되고 있는 공진형의 특이한 광투과 현상과 유사한 성질을 지닌다고 사료된다.

• 정보저장시스템학회논문집
• /
• 제6권2호
• /
• pp.79-82
• /
• 2010

In optical imaging systems, such as microscopes, high resolution exposure systems, and optical storage devices, higher optical resolution is a requirement. One of the promising technologies that is able to satisfy this requirement with relatively simple construction and reliable performance are, solid immersion lens (SIL)-based near-field (NF) optical systems. High NA optical systems using annular apertures have been investigated as one solution to achieve higher resolutions and an extended focal depth. By applying an optimized annular aperture to convention SIL optical head resolution can be increased by approximately 20%. This novel SIL-based near-field optics will be verified through experiments such as measuring focused beam spot profiles and observing the topology of a measurement sample. The studied SIL-based near-field optics can be applicable to not only next generation optical storage device but also high resolution microscopy and pattering technologies.