• 한국주거학회논문집
• /
• 제21권6호
• /
• pp.43-52
• /
• 2010

It has applied the design method of face to face dimension, an MC (Modular Coordination) design method, at design steps of an apartment house for standardization of architecture. But It has been still using center line size. A construction limit isn't specific on these center line size, and dead space occurs with excessive gaps as size matching isn't performed well between structural sieve and parts. And above all, measurement before construction isn't to expect standardization, and to increase custom-made furniture. We investigate manufacture of a preferential domestic system kitchen and construction state, and we derive from a problem in viewpoints of standardization for this. And we utilized a reference plane, and we present construction document and design plan in order to solve these problems. And we analyze an effect got by application of the assembly basis aspect that we presented, and we can raise efficiency of standardization of housing and construction industry, and we light ultimately up.

• 한국태양에너지학회 논문집
• /
• 제28권6호
• /
• pp.15-23
• /
• 2008

The article deals with system technology of a new solar heating system which systematically combines exiting solar collector technology, auxiliary electrical water heating, floor heating system and well insulated construction method and its application of this system to apartment house heating system in the cold region, and also analyzed performance of the new system in terms of technical and economic feasibility. Results shows that energy efficiency approaches up to 50% of the energy consumption of local construction from 1980 to 1981. The implementation of "DQ technology" to floor heating system achieved from 79% to 85% of the energy-saving benefits comparing to other housing units which were supplied by the local district heating plant.

• Architectural research
• /
• 제10권1호
• /
• pp.33-39
• /
• 2008

Condensation has mainly occurred in corridor type apartment door which is exposed to the outside air and is made of steel, which has high thermal conductivity. As a result, the total costs of repair have increased with the number of disputes with residents. In this study, therefore, we investigate materials and construction methods used in apartment door, perform a computer simulation to find out possible improvements, and then suggest the dew point to prevent the occurrence of condensation throughout simulation. The results indicate that the temperature that condensation does not occur is $15.4^{\circ}C$, and the optimum method of achieving this dew point is shown to be a door frame system including a large vertical slot to decrease the area of thermal conduction between the outer and inner portions of the door frame. Mock-up tests show that the surface temperature of the door frame was higher than the dew point, and the system can withstand severe cold conditions of $-20^{\circ}C$. In application test, the surface temperature of door frame with vertical slots is $5.9^{\circ}C$in average, which is higher than the existing door frame. Furthermore, in the temperature distribution of the surrounding door measured with infrared ray camera, the existing door shows the high temperature distribution indicating lack of insulation, but the improved door shows the low temperature distribution indicating higher insulation.

• KIEAE Journal
• /
• 제10권6호
• /
• pp.145-151
• /
• 2010

Bearing wall system was used extensively in most multi-residential apartment buildings in Korea. However, bearing wall apartments have the lack of architectural plan flexibility, remodelling-incompatible, causing serious economic losses in terms of construction waste. Recently, many researchers have studied the use of Rahmen structure as a potential alternative. The beam-column connection in the paper for long-life apartment housing forms connection of a Rahmen structure utilizing the advantages of steel and reinforced concrete. In addition, reduction of cast-in place concrete and construction schedule is expected by using precast concrete. Reduction effect of quantity decreased construction costs and $CO_2$ emission of key construction materials. However, verifying the feasibility of new construction method entails numerous challenges. Accordingly, the purpose of this study is to analyze the construction feasibility of sleeve, coupler, and pressure welding connections for long-life apartment building structure. A 3D modeling software was used to perform the analysis, and a real scale model was created to verify the results of construction feasibility. By verifying the construction feasibility of beam-column connections, this study will contribute to the efficient application of these methods on construction sites.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.885-890
• /
• 2008

최근 몇 년 사이 공동주택 리모델링을 둘러싼 여건의 변화는 리모델링의 활성화라는 입장에서 볼 때 매우 고무적이라 할 수 있다. 리모델링의 추진에 대한 단지 내 다른 주민들의 반발을 어떻게 조정할 것인가가 주요한 과제로 대두되었고, 리모델링을 위한 재원 조달과 리모델링 이후의 자산가치 변화가 핵심적인 쟁점으로 부각되었다. 특히 많은 언론의 보도에도 불구하고 리모델링에 의한 자산가치 즉 부동산 가격의 상승효과가 뚜렷하게 입증되지 못하고 있으며, 금융기관 역시 리모델링 이후의 자산가치 상승에 대해 상당히 보수적인 평가를 하고 있기 때문에, 입주자들은 리모델링을 위한 재원의 조달에 상당한 어려움을 겪고 있을 뿐만 아니라 리모델링 사업의 성공여부도 확신하지 못하고 있다. 제도개선은 동 단위 리모델링을 보다 효율적이면서도 도시와 단지 전체의 관리 방향과 조화되는 방향으로 추진되어야 하며, 또한 공공지출을 최소화하면서도 리모델링을 실질적으로 지원할 수 있는 제도적 방안이 강구되어야 한다.

• KIEAE Journal
• /
• 제16권1호
• /
• pp.47-55
• /
• 2016

Purpose: Long-life housing causes unavoidable cost increase while providing higher durability, flexibility, and repair easiness compare to those of normal apartment. The effectiveness should be evaluated considering the level of passing mandatory Long-life housing Certification System when supplying specific size of apartment complex. Thus, it is essential to identify the estimated costs and the obtainable grade by applying the optional element technologies selectively during the design phase. This study aimed to suggest the technology influence matrix(TIM) to support decision-making of element technologies in planning stage of long-life housing. Method: The technology influence matrix was established based on the property information about applicable element technologies for long-life housing such as construction methods, interface types, cost data, and certification-related characteristics. The usefulness of TIM was verified through case study, in which TIM was applied to the exclusive housing unit and the influences from four areas of quantity, cost, certification, and schedule were identified and calculated. Result: TIMs covering four areas representing the essential planning factors were developed, and are expected to contribute to sound decision-making in planning long-life housing.

• 한국안전학회지
• /
• 제22권2호
• /
• pp.53-58
• /
• 2007

This study is to find out primary factors through the punch list in the large scale apartment housing complex, to prevent repeatedly occurring defects of construction and to gain quality management. The following are the findings of the research. (1) The positive strengthening of supervision for the workers can contribute to prevent defects of apartment construction and make better quality of the construction. (2) A solution should be made for the poor of surface join and the damage of work element showing a lot in the apart construction, which prevent defects and improve construction quality. (3) Indirect factors such as negligence and carelessness of the management should be improved to advance construction quality, and the caution and control strengthening of the management should be followed. It is revealed that hitch, omission, and heedlessness come from the defects, and the shortage of skill and checking appear as indirect factors. Therefore, to get quality improvement, the enhancement of the management factors, employment of excellent workers, and enhancement of working attitude and construction management are needed.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.230-235
• /
• 2009

In our country, the application of the design method of face to face dimension in wall-slab apartment has passed 10 years. So MC design method has fixed in the design step to some degree. In Design and Work Execution of House the exclusive area of the apartment was calculated by face to face dimension. And the term of face to face dimension was known broadly to clients, construction company, etc. But design method of face to face dimension is not to simply extend the room size so far as wall depth in design process but to ensure the actual space should be considered with efficient use and assembly of building components. That is to say, Design method of face to face dimension is not to be defined by design step but to be related with construction and maintenance. However in construction process the point of face to face design method was not understood even now. So the purpose of this study was to extract the effect and question of face to face design method in construction process by survey of actual condition of structure and construction quality, and compare this result with existing construction method. The following project of this study is to survey of actual condition of interior components such as gypsum board, windows & doors etc. Therefore this study is to induce architectural long-life through architectural standardization construction and component's exchange, and, by the subject of the study on Apartment to have design guideline and basis for joining part between Gypsumboard and windows.

• 설비공학논문집
• /
• 제22권6호
• /
• pp.404-412
• /
• 2010

The purpose of this study is to accomplished an in-site evaluation method for existing building insulation status using Infra-red camera and to consider improvement performance to prevent condensation and draw the optimum insulation design method for building using simulation tool. The research contents of this study are to evaluate validity and suitability of building insulation defect survey using Infra-red camera for apartment housing with temperature and heat flow pattern analyze method. Based on this research, the three corners, weak part in condensation, were selected in apartment building and conducted simulation by three-dimensional steady state. From the results, it is required to strengthen insulation design, and it is founded that existing insulation system typically applied to most Korean apartment housings have serious insulation defect that insulation is disconnected by structural components at the joints of wall-slab and wall-wall in envelope. Thus, it is considerate to need a concrete technology improvement.

• 한국주거학회논문집
• /
• 제19권5호
• /
• pp.103-110
• /
• 2008

The purpose of this study is to know how visual-field obstruction from fire smoke influences a resident's necessary time to reach fire escape and evacuation movement in a high-rise apartment housing. Generally, fire smoke not only gives visual-field obstruction and breath troubles to residents but interrupts their evacuation behavior. If a fire smoke layer is formed in the core department when evacuee enters at the evacuation staircase until, residents will be made to undergo a range of vision obstacle. In order to set a situation like that, participants wore eye bandage which had been made especially before the experiment. Also as a comparative standard, through no.1442 Japanese construction ministry notices about the building evacuation safety verification method, this study calculated smoke layer's dissent time and evacuation time. Then to compare with the former, the participants without an eye bandage joined a experiment once again. This study has understood how fire smoke effects on one's evacuation delay by analyzing residents' evacuation time to reach the staircase and movement route, however, in this study a toxic gas is not considered because it might threaten participants not to breathe.