• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.361-362
• /
• 2005

Antimony doped tin oxide(ATO) nano powders have been synthesized by homogeneous precipitation method using $SnCl_4\cdot5H_2O$ for precursor, $SbCl_3$ as doped material and urea. The hydrolysis of urea and conductive mechanism and Heat treatment was performed at the temperature from $500^{\circ}C$ to $700^{\circ}C$ in air. The ATO nano powders are characterized by means of Thermogravimetry differential thermal analyzer (TG-DTA), X-ray diffraction (XRD), Brunauer, Emmett, and Teller adsorption (BET), Scanning electron microscopy (SEM) ATO nano powders with an average size of nm and the highest surface area 129 $m^2g^{-1}$ are obtained.

• Transactions on Electrical and Electronic Materials
• /
• 제13권5호
• /
• pp.241-244
• /
• 2012

Antimony doped tin oxide (ATO) thin films on glass substrate were prepared by the chemical solution deposition (CSD) method, using sol-gel solution synthesized by non-alkoxide precursors and the sol-gel route. The crystallinity and electrical properties of ATO thin films were investigated as a function of the annealing condition (both annealing environments and temperatures), and antimony (Sb) doping concentration. Electrical resistivity, carrier concentration, Hall mobility and optical transmittance of ATO thin films were improved by Sb doping up to 5~8 mol% and annealing in a low vacuum atmosphere, compared to the undoped tin oxide counterpart. 5 mol% Sb doped ATO film annealed at $550^{\circ}C$ in a low vacuum atmosphere showed the highest electrical properties, with electrical resistivity of about $8{\sim}10{\times}10^{-3}{\Omega}{\cdot}cm$, and optical transmittance of ~85% in the visible range. Our research demonstrates the feasibility of low-cost solution-processed transparent conductive oxide thin films, by controlling the appropriate doping concentration and annealing conditions.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 1부
• /
• pp.478-481
• /
• 2010

Antimony doped tin oxide (ATO) nanoparticles were added as nanofillers to UV-curable polyester-acrylate (PEA) resin for coating to improve thermal, mechanical, and electrical properties. In this study, ATO nanoparticles were grafted by 3-glycidyloxypropyltrimethoxysilane and 3-methacryloxypropyltrimethoxysilane respectively to improve dispersion and interfacial adhesion. The physical properties and surface scratch hardness of the UV-curable nanocomposite coating were improved considerably by introducing the modified ATO nanoparticles.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.175-175
• /
• 2010

Transparent conducting oxide (TCO) films are widely used as transparent conducting thin film material for application in various fields such as solar cells, optoelectronic devices, heat mirrors and gas sensors, etc. Recently the increased utilization of many transparent electrodes has accelerated the development of inexpensive TCO materials. Indium tin oxide (ITO) film is well-known for TCO materials because of its low resistivity, but there is disadvantage that it is too expensive. ZnO film is cheaper than ITO but it shows thermally poor stability. On the contrary, antimony-doped tin oxide films (ATO) are more stable than TCO films such as Al-doped zinc oxide (AZO) and ITO. Moreover, SnO2 film shows the best thermal and chemical stability, low cost and mechanical durability except the poor conductivity. However, annealing is proved to improve the conductivity of ATO film. Therefore, in this work, antimony (6 wt%) doped tin oxide films to improve the conductivity were deposited on 7059 corning glass by RF magnetron sputtering method for the application to transparent electrodes. In general, of all TCO films, glass is the most commonly selected substrate. However, for future development in flexible devices, glass is limited by its intrinsic inflexibility. In this study, we report the growth and properties of antimony doped tin oxide (ATO) films deposited on PES flexible substrate by using RF magnetron sputtering. The optimization process was performed varying the sputtering parameters, such as RF power and working pressure, and parameter effect on the structural, electrical and optical properties of the ATO films were investigated.

• 공업화학
• /
• 제21권3호
• /
• pp.311-316
• /
• 2010

본 연구는 높은 분산 안정성을 유지하는 antimony-doped tin oxide (ATO) 분산액을 제조하기 위하여, 습식 볼밀법으로 분쇄시간에 따른 ATO의 입자크기, 입도분포, 분산성의 변화를 고찰하였다. 또한 각각의 습식 볼밀 처리된 ATO 분산액의 pH를 변화시켜 ATO 분산액의 분산 특성을 고찰하였다. 습식 볼밀 분쇄 조건에 의하여 ATO의 입자크기 및 입도 분포 변화는 레이저회절 입도분석기와 주사전자현미경을 이용하여 평가하였고, 습식 볼밀 분쇄 시간 및 pH조건에 따른 ATO 입자의 분산성은 제타전위 측정법과 다중광산란(multiple light scattering)법을 이용하여 평가하였다. 분쇄 조건 중 60 min 동안 처리된 ATO 입자 크기는 30% 이하로 작아지고, $1{\sim}35{\mu}m$에서 $0.1{\sim}5{\mu}m$로 입도분포를 갖는 균일한 입자를 얻을 수 있었다. 그러나 분쇄조건을 60 min 이상 처리한 것은 역분쇄 및 재응집 현상의 발생으로 인하여 한계 분쇄 시간이 나타나는 것을 알 수 있었다. 이러한 결과로부터 ATO 분산액은 습식 볼밀 분쇄 시간을 증가시킬수록 입자 크기가 감소하고 표면 에너지가 증가하여 입자간의 반발력이 커지게 됨을 알 수 있었고, 또한 용액의 pH를 증가시킬수록 입자의 표면 이온화도가 커짐으로 인하여 ATO 분산액의 분산성이 향상되는 것을 알 수 있었다.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.735-742
• /
• 1996

Antimony-doped Tin oxide (ATO) thin films were deposited on soda-lime glass substrates by DC magnetron sputtering technique. Effects of DC power film thickness and post heat-treatment on electrical conductivity of ATO film were investigated. Other properties of ATO film such as optical anti-chemical and wear properties were also reported in this work. The obtained ATO films showed electrical resistivities ranging from 5$\times$10-3 $\Omega$cm to 3$\times$10-3 $\Omega$cm with the average optical transparency above 80% in visible wavelength range and excel-lent anti-chemical properties where the electrical resistivity was not changed even after soaking the films in 1M HCl or 1M NaOH solution for 10 days. These properties were found to be related to the crystallinity of ATO film and the films having higher crystallinity showed better properties.

• 한국결정성장학회지
• /
• 제13권5호
• /
• pp.241-246
• /
• 2003

ATO(antimony-doped tin oxide) 투명전도막을 sol-gel dip coating 방법에 의해 $SiO_2$/glass 기판 위에 성공적으로 제조하였다 ATO막의 결정상은 $SnO_2$상임을 확인하였고, 막의 두께는 withdrawal speed를 50 mm/minute로 코팅시 약 100 nm/layer였다. $SiO_2$/glass 기판 위에 코팅한 400 nm두께의 ATO 박막을 질소분위기에서 annealing한 후, 측정한 광 투과율과 전기 저항치는 각각 84%와 $5.0\times 10^{-3}\Omega \textrm{cm}$였다. 이러한 특성은 $SiO_2$막이 Na 이온의 확산을 제어하여 $Na_2SnO_3$ 및 SnO와 같은 불순물의 형성을 억제하고, 막 내부의 Sb의 농도와 $Sb^{3+}$에 대한 $Sb^{5+}$의 비를 증가시키는데 기여했기 때문으로 확인되었다. 또한, $N_2$ annealing은 $Sb^{5+}$뿐만 아니라 $Sn^{4+}$를 환원시킴으로써 전기전도도를 향상시킴을 확인하였다.

• 한국안광학회지
• /
• 제15권4호
• /
• pp.299-305
• /
• 2010

목적: 본 연구에서는 투명 전도막으로 사용할 안티몬주석산화물 박막의 특성변수인 RF 전력, T-S간 거리 등의 변화에 따른 박막의 광학적, 전기적, 구조적 특성을 알아보았다. 방법: 안티몬주석산화물 박막을 마그네트론 스퍼트링 방법으로 실온에서 $SnO_2:Sb_2O_5$= 95:5 wt%의 비율로 제작하였다. 결과: 안티몬주석산화물 박막은 RF 입력전력에 가장 민감한 특성변화를 보였는데, 30W의 RF 입력전력에서 광투과율이 78%, 표면거칠기가 0.56 nm, 면저항이 1007 $\Omega{\cdot}cm^{-2}$이었다. 결론: 안티몬주석산화물 박막은 T-S간 거리와 RF 전력에 따라 구조적, 광학적 및 전기적 특성이 크게 달라지는 것을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.270-271
• /
• 2008

Antimony (6 wt%) doped tin oxide (ATO) films to improve conductivity were deposited on 7059 coming glass by RF magnetron sputtering method for application to transparent electrodes. The ATO film was deposited at a working pressure of 5 mTorr and RF power of 175 W. We investigated the effects of the post-annealing temperature on structural, electrical and optical properties of the ATO films. The films were annealed at temperatures ranging from $300^{\circ}C$ to $600^{\circ}C$ in step of $100^{\circ}C$ using RTA equipment in vacuum ambient. X-ray diffraction (XRD) measurements showed the ATO films to be crystallized with a strong (101) preferred orientation as the annealing temperature increased. Electrical resistivity decreased significantly with annealing temperatures up to $600^{\circ}C$. ATO film annealed at temperature of $600^{\circ}C$ showed the lowest resistivity of $5.6\times10^{-3}\Omega$-cm. Optical transmittance increased significantly with annealing temperatures up to $600^{\circ}C$. The highest transmittance was 90.8 % in the visible range from 400 to 800 nm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.361-364
• /
• 2000

Antimony doped tin oxide (ATO) thin films were deposited at room temperature by reactive ion-beam sputter deposition (IBSD) technique in oxidizing atmosphere utilizing Sb and Sn metal targets. Effect of Sb doping concentration, film thickness and heat treatment on electrical and optical properties was investigated. The thickness of as-deposited films was controlled approximately to 1500 $\AA$ or 2000$\AA$, and Sb concentration to 10.8 and 14.9 wt%, as determined by SEM and XPS analyses. Heat treatment was performed at the temperature from 40$0^{\circ}C$ to 80$0^{\circ}C$ in flowing $O_2$or forming gas. The resulting ATO films showed widely changing electrical resistivity and optical transmittance values in the visible spectrum depending on the composition, thickness and firing condition.