• 대한조선학회논문집
• /
• 제41권1호
• /
• pp.88-93
• /
• 2004

Electrochemical impedance spectroscopy was used to evaluate the anticorrosive properties of resin(alkyd, epoxy, urethane) and pigment(hydroxy apatite(HAp), zinc potassium chromate(ZPC). red lead(RL)). The corrosion behavior of coatings applied on steel has been investigated during exposure to 0.5M-NaCl The anticorrosive performances of resins were found to depend on their chemical nature and decreased in the order of urethane > epoxy > alkyd resin coating. Hydroxy apatite and zinc potassium chromate pigment which have property to passivate the substrate showed relatively high anticorrosive performance.

• 한국해양공학회지
• /
• 제18권1호
• /
• pp.75-79
• /
• 2004

Organic coatings are widely used to control of the corrosion of a steel structure. The water in coatings may cause the coatings to swell, leading to the degradation of the coatings. In addition, water affects the permeation of oxygen and other corrosive agents, and consequently, the presence of such substances at coating-metal interface promotes corrosion of the metal substrate. In this study, the anticorrosive properties of 4 types of coating, such as epoxy-epoxy, epoxy-urethane, urethane-epoxy, urethane-urethane, were evaluated. The evaluation tests were conducted under cyclic water-absorption/desorption conditions, consisting of alternative exposure to diluted 0.001M-LiCl(a$H_2O$≒1) and concentrated 10M-LiCl(a$H_2O$≒0.15). The anticorrosive performance of coatings was found to decrease in the order of urethane-urethane > urethane-epoxy > epoxy-epoxy coating.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.262-268
• /
• 2003

Organic coatings are widely used to control the corrosion of steel structure. The water in coatings may cause swelling or solvation of coatings, leading to the degradation of coatings. In addition, water affects the permeation of oxygen and other corrosive agents, and consequently the presence of such substances at coating-metal interface promotes corrosion of metal substrate. In this study, the anticorrosive properties of 4 types of coating, such as epoxy-epoxy, epoxy-urethane, urethane-epoxy, urethane-urethane, were evaluated. The evaluation tests were carried out under cyclic water-absorption/desorption conditions, consisting of alternative exposure to diluted 0.001M-LiCl($a_{1120}{\fallingdotseq}1$) and concentrated l0M-LiCl($a_{1120}{\fallingdotseq}0.05$). The anticorrosive performances of coatings were found to decrease in the order of urethane-urethane> urethane-epoxy> epoxy-epoxy coating.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.338-341
• /
• 2008

Galvannealed Sheet Steel, which is being widely used in the automotive industry, is made by reheat after dip zinc galvanizing process. By this, A Fe-Zn alloy is created which enhance anticorrosive property and weldability. This paper describes basic design for 2000kW induction heating inverter system for galvannealling process and test result of 250kW inverter module which is used in parallel to form 2000kW inverter system.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.265-269
• /
• 2010

This paper describes the exfoliation and surface modification of muscovite mica for UV coating formulation. For the exfoliation of the mica, hydrothermal process was used in the presence of lithium nitrate ($LiNO_3$). After the cation exchange with $Li^+$ ions, the surface of the mica was modified with several amphiphilic substances to increase compatibility and storage stability in UV coating formulation. Such a hydrophobic surface modification affected colloidal stability as well as dispersibility of the exfoliated mica in UV coating solution. Anticorrosive property of mica/UV coated steel plates was tested by salt spray test (SST) and compared with sodium montmorillonite ($Na^+$-MMT)/UV coated steel plates.

• 한국방재학회 논문집
• /
• 제4권2호
• /
• pp.35-45
• /
• 2004

최근 항공기, 자동차 등에 사용되어왔던 복합재료가 그 사용 영역을 넓혀 교량 상판, 상하수도용 관로 등에 적용되고 있다. 이러한 복합재료의 주요 장점은 고강도, 경량성, 그리고 뛰어난 내부식성으로 기존의 재료에 비해 많은 장점을 갖고 있으나, 이러한 재료의 정확한 특성 파악 및 이를 사용한 구족물의 거동의 정확한 분석의 어려움으로 복합재료의 적용이 활발히 이루어지지 못하고 있는 실정이며, 이러한 요인이 복합재료를 토목구조물에 적용하는데 가장 큰 제한요소로 작용해 왔다. 본 연구에서는 복합재료 구조물의 해석을 위한 사전 연구로서, 현재 국내에서 사용되고 있는 GFRP 관로에 대한 재료특성 실험을 수행하여, 각각의 구성 적층재료별 재료 특성 및 전체 적층판에 대한 재료특성을 제공한다.

• Corrosion Science and Technology
• /
• 제19권1호
• /
• pp.23-30
• /
• 2020

Heat sinks are most widely used in thermal management systems; however, the heat dissipation efficiency is usually limited. Therefore, in order to increase heat dissipation efficiency of the heat sink, the heat-dissipating paint using 2D materials (hexagonal boron nitride (h-BN) and graphene) as thermally conductive additive was designed and evaluated in the present study. The heat dissipation performance of the paint was calculated from temperature difference between the paint-coated and -uncoated specimens mounted on the heat source. The highest heat dissipation performance was obtained when the ratio of h-BN to resin was 1/10 in the paint. In addition, further reduction in the temperature of the test specimen by 6.5 ℃ was achieved. The highest heat dissipation performance of the paint prepared using graphene was achieved at a 1/50 ratio of graphene to the resin, and a 6.5 ℃ reduction was attained. In addition, graphene exhibited enhanced corrosion resistance property of heat-dissipating paint by inhibiting the growth of the paint blisters.

• 접착 및 계면
• /
• 제22권2호
• /
• pp.47-56
• /
• 2021

자기치유 소재를 이용하여 강판을 코팅하는 경우, 코팅 소재에 상처가 날 경우 스스로 상처를 치유하여 강판이 부식되는 것을 방지할 수 있다. 하지만 자기치유 과정에는 시간이 소요되며, 따라서 자기치유가 되기 전에 강판의 상처가 부식 될 수 있다. 본 연구에서는 가역적인 hindered urea bond(HUB)를 통하여 가교 결합을 형성하면서 동시에 부식 방지제로써 작용하는 DTBEDA를 이용하여 듀얼자기치유 메커니즘을 가지는 코팅 소재를 제조하였다. 또한 제조된 소재를 강판에 코팅하여 의료용 메스와 나노/마이크로 압입시험기를 통하여 스크래치에 대한 자기치유 성능을 확인하였으며, DTBEDA의 내부식성 효과를 전기화학 임피던스 분광법(EIS)을 통하여 분석하였다.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6655-6665
• /
• 2015

할로겐계 난연제의 환경적 문제로 인한 규제가 강화되면서 비할로겐타입의 인계화합물을 기초로 한 난연제의 비중이 높아지고 있으며, 기능성 film 제조에 있어 난연 효과를 보이는 적인 첨가에 따라 수지의 물성 및 열적 특성이 확연히 달라진다. 난연 효과를 높이고자 난연제 과량 첨가시 수지의 물성은 크게 저하되며, 수축 또는 방청 등 기능성 film에 적용되기 어렵다. 본 연구에서는 적인MB의 함유량에 따른 LDPE film을 blow 타입의 사출공청을 통해 제조하였고, 이에 대한 난연성 시험과 인열 강도 및 수축률, 방청성 평가를 통해 적인-LDPE film의 기계적 특성 및 물성특성에 미치는 영향력과 함유량에 따른 적인난연 film의 특성연구를 그 목적으로 하였다. 난연성의 경우 VTM 0를 보였으며, 인열 강도의 경우 MD 및 TD의 경향성이 상반되는 것을 알 수 있었다. 수축률의 경우 함유량에 따른 특성은 보이지 않았으며, 방청성의 경우 국내 방청 수축 필름 신뢰성 규격의 기준인 0.05 % 보다 우수한 결과를 보였다.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.127-135
• /
• 2006

We analyzed recyclability of the fuel tanks made from steel or aluminum alloy. For a comparison of the fuel tank recyclability, first we had analyzed the process of disassembly in a vehicle and evaluated its disassemblability. Then we evaluated the recyclability for reuse and withdrawal. The processes were more or less same owing to the similarity of fastening method of fuel tank and components. However, the fuel tank of the aluminum alloy was easier (about 5%) to disassembly than the fuel tank of steel. This could be attributed to the differences in weight of steel and aluminium. On light of the withdrawal and reuse, the fuel tank made up of steel needed to plate with zinc or lead due to its anti-corrosiveness. Hence, it required additional processes. In this paper, we were explaining the results of our on going research on the recyclability of fuel tanks made of steel and aluminum alloys. The differences that we found between the fuel tank made up of the aluminum alloy and steel were in their weight, recyclability, disassemblability, anticorrosive property, cost and productivity.