• International Journal of Aerospace System Engineering
• /
• 제8권1호
• /
• pp.1-13
• /
• 2021

Contra-rotating fan is comprised of two rotors which are rotating in the opposite direction. The fan stages are named rotor-1 and rotor-2. Benefits from the use of contra rotation are in terms of better efficiency and improved thrust to weight ratio. Failure of contra-rotating fan stage blade in-service results in safety risks, repair costs, and revenue losses. This paper focuses on the vibration analysis and one way fluid-structure interaction of high aspect ratio, low speed contrarotating fan rotors. Modal analysis and modal pre-stress analysis of contra-rotating fan rotors were carried out to calculate the natural frequencies, One way fluid-structure interaction (FSI) was carried out where the computational analysis of the blades was performed using ANSYS CFX. The boundary conditions for CFD analysis were considered from the actual experimental velocity flow field at the inlet and pressure outlet. Based on the results obtained from the CFD analysis, the structural analysis such as deformation and Von-Misses stresses was carried out by using the finite element method (FEM) with ANSYS. The results provide necessary guidelines for the safe running of the contra-rotating fan. The analysis also will be helpful to understand the change of flow behavior due to a rotor deformation.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.359-374
• /
• 2024

A high-fidelity numerical analysis methodology was proposed for evaluating the fuel rod cladding integrity of a Prototype Gen IV Sodium Fast Reactor (PGSFR) during normal operation and Design basis events (DBEs). The MARS-LMR code, system transient safety analysis code, was applied to analyze the DBEs. The results of the MARS-LMR code were used as boundary condition for a 3D computational fluid dynamics (CFD) analysis. The peak temperatures considering HCFs satisfied the cladding temperature limit. The temperature and pressure distributions were calculated by ANSYS CFX code, and applied to structural analysis. Structural analysis was performed using ANSYS Mechanical code. The seismic reactivity insertion SSE accident among DBEs had the highest peak cladding temperature and the maximum stress, as the value of 87 MPa. The fuel cladding had over 40 % safety margin, and the strain was below the strain limit. Deformation behavior was elucidated for providing relative coordinate data on each active fuel rod center. Bending deformation resulted in a flower shape, and bowing bundle did not interact with the duct of fuel assemblies. Fuel rod maximum expansion was generated with highest stress. Therefore, it was concluded that the fuel rod cladding of the PGSFR has sufficient structural safety margin during DBEs.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.309-316
• /
• 2011

일반적으로 카누는 목재나 FRP 등으로 제작된다. 그러나 소비자들은 기존의 재료에 비하여 염가이면서 친환경 재료를 선호한다. 특히, 선진국에서는 일부 선박에 대하여 FRP 선체 제조를 금지하는 법안을 발표하고 이에 따른 국제협약을 제정하였다. 폴리에틸렌은 식료품 용기나 의료용 용기로 널리 사용되는 재료로서 리사이클 가능한 재료이다. 본 연구에서는 카누 선체 재료로 폴리에틸렌으로 선정하였으며 선형설계는 상용 선형 설계 프로그램인 3D Boat Design을 이용하여 수행하였다. 카누 구조하중은 우선 ANSYS CFX R12.1을 이용하여 선체에 작용되는 압력 분포를 구하고 이것을 ANSYS WORKBENCH R12.1로 넘겨 선체 압력 하중과 패들러 하중을 동시에 고려하였다. 카누 각 치수를 설계변수화하여 응력과 무게를 최소화하는 최적화 과정을 반응표면방법과 만족도 함수를 이용하여 수행하였다. 개발된 카누는 운항시험에서 직진성이나 안정성은 우수하나 운반성과 선회성 및 속도는 보통인 것으로 판단된다.

• 한국유체기계학회 논문집
• /
• 제11권6호
• /
• pp.18-23
• /
• 2008

In this paper, effects of inlet shape on the performance of a submerged cargo pump were numerically studied using a commercial CFD code ANSYS-CFX. The inlet shape, especially the gap between pump and suction well, is an important parameter in a point of view of performances of submerged cargo pump due to its effects on the residual and also hydraulic performance of the pump, respectively. To investigate the optimized gap, the overall performance degradations were calculated with the gap. In addition to that, the flow field through the gap was investigated to explain the effect of velocity non-uniformity on the performance of the pump impeller.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3045-3049
• /
• 2007

This paper presents a numerical study to enhance the mixing of polyurethane resin in a container. In general, the properties of polyurethane resin vary with the production environment, such as temperature. However in this study we assumed that the dynamic viscosity of the polyurethane is kept constant at 15 [Pa s]. We computed the flow solution and visualized the mixing pattern for different shapes of mixers by using commercial code, ANSYS CFX. In order to quantify mixing, we employed the concept of mixing index by volume integration.

• 자동차안전학회지
• /
• 제8권1호
• /
• pp.7-12
• /
• 2016

In order to analyze the soundness of ventilated disc brake systems, numerical study was performed with various vane shapes. In particular, two different vane type, and the braking time from 3.0 s to 4.5s with the interval of 0.5s were considered. Transient temperature distributions on the ventilated disc brake assembly were calculated using ANSYS CFX ver. 16.1. To elucidate the soundness of ventilated disc brake systems, moreover, the heat transfer coefficients were evaluated. Results were graphically depicted with different geometrical vane configurations and braking time.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.139.1-139.1
• /
• 2015

열플라즈마 토치 및 자유연소아크 시스템 개발이 증가함에 따라 실험을 통해 얻기 어려운 물리적 특성들을 파악하기 위해 전산유체역학을 이용한 해석방법이 널리 이용되어 왔다. 대부분의 경우에 해석의 용이성을 위하여 2차원 축대칭으로 가정하여 계산을 수행하지만, 2차원 해석만으로는 실제 물리적인 현상을 정확하게 반영하기 힘들다. 따라서 보다 실질적인 결과를 얻기 위해서는 기존의 2차원 해석방법을 3차원 해석방법으로 변환할 필요성이 있다. 본 논문에서는 3차원 열플라즈마 해석을 위한 첫 단계로써 상용 CFD 프로그램인 ANSYS CFX를 사용하여 동일한 해석모델에 관하여 2차원 해석과 3차원 해석을 수행하였다. 해석방법 및 결과의 타당성을 평가하기 위하여 Schnick-Fuessel 모델 (SF 모델)과 Haddad-Farmer 모델 (HF 모델)을 선정하여 각각의 모델에 대한 해석결과를 문헌에서 발췌한 실험결과 등과 비교하였다. 이러한 결과 비교를 통해서 본 연구에서 적용한 열플라즈마 해석에 관한 수치해석 방법이 충분히 3차원 해석으로 확장 가능함을 확인할 수 있었다.

• 한국기계가공학회지
• /
• 제10권1호
• /
• pp.23-30
• /
• 2011

This study is to analyze the internal flow at the inside of computer case which is commonly used. The inner configuration are modelled and simulation analysis is done by ANSYS-CFX. Dead volume is happened according to the positioning of VGA and HDD. The advanced model is suggested by removing this volume and making the smooth cooling flow. This model is formed with the constraint conditions same as the existing model. As compared with the existing model, flow configuration is different and the average temperature becomes lower through flow analysis about the advanced model.

• 한국산업융합학회 논문집
• /
• 제20권5호
• /
• pp.425-430
• /
• 2017

This study propose CAE analysis of fire damper and design of the damper control system. Through the design of the damper system for ANSYS-CFX heat transfer. As a result of the analysis, continuance equation of the damper control. Climate system. Finaily, We have obtained a fire damper solution by using orthogonal array. The fire damper of the set of fixture and alveolus are made by using a CAE software. Also, the optimum design offshore structures. The new H-120 class fire damper was designed. In the near future, fire resistance test was carried out to obtain class H-120 thermal insulation of fire dampers according to a hydrocarbon fire conditions. The test results showed that the insulation of the damper blade was an important factor in the fireproof performance of fire dampers concerning the coaming length minimum 500mm on the unexposed side as specified test standard.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2016년도 춘계학술대회
• /
• pp.88-89
• /
• 2016

선택적 환원 촉매(SCR : Selective Catalytic Reduction) 시스템은 대기오염을 예방하기 위한 배기가스 처리장치 중 하나이다. 본 연구에서는 전산유체역학(CFD : Computational Fluid Dynamics)를 사용하여 SCR 시스템 의 효율향상을 위하여 ANSYS-CFX package를 이용하여 점성 유동 해석을 수행하였다. SCR 시스템의 점성 유동 흐름의 전산 유체 역학을 이용하여 시뮬레이션하기 위하여 Navier-Stokes 방정식을 지배방정식으로 사용하였다. CATIA V5를 사용하여 SCR 시스템의 형상을 3D 모델링을 하였고, 암모니아와 배기가스의 혼합 비율을 확인하기 위해 요소수 분사 노즐의 위치를 변경하였다. 요소수 분사 노즐은 배기관의 입구로부터 1/3, 1/2, 2/3에 위치한다. 또한, 분사 노즐의 위치가 배기관 입구의 1/3에 위치할 때 노즐의 분사구수에 따른 효율을 확인하기 위하여 분사구수를 4Hole, 6Hole, 8Hole일 경우를 확인하여 비교하였다. 시뮬레이션의 결과로는 배기관 입구에 가까울수록, 분사구수가 많을수록 효율이 좋아짐을 확인하였다.