• Bulletin of the Korean Chemical Society
• /
• 제24권12호
• /
• pp.1827-1831
• /
• 2003

Field emission of carbon nanotubes (CNTs) fabricated by disproportionation of CO has been studied. CNTs fabricated on well-ordered Co nanowire arrays formed on the porous anodic aluminum oxide templates were well graphitized, uniform in diameter and aligned vertically with respect to the plane of the template, and showed a good field emission property. Very uniform emissions were observed from the CNTs fabricated at relatively low temperature, $500-600^{\circ}C$. Low fabrication temperature such as $500^{\circ}C$ could make it possible to fabricate CNTs on soda lime glass, a low-cost substrate, for display panel.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.557-558
• /
• 2006

The mechanical properties of micro-hardness and internal stress of Ni-Fe alloy thin film made by electrodeposition method have been measured as a function of bath composition and current density. And also the microstructure of $200{\AA}$ Ni-Fi nanowires made using anodic aluminum oxide(AAO) templates by electrodeposition method have been observed by SEM as a function of ultrasonic treatment time and bath composition.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.265.1-265.1
• /
• 2013

Nanoporous anodic aluminum oxide (AAO), a self-ordered hexagonal array has various applications for nanofabrication such as nanotemplate, and nanostructure. In order to obtain highly-ordered porous alumina membranes, Masuda et al. proposed a two-step anodization process however this process is confined to small domain size and long hours. Recently, alternative methods overcoming limitations of two-step process were used to make prepatterned Al surface. In this work, we confirmed that there is a specific tendency used a PDMS stamp to obtain a pre-patterned Al surface. Using the nanoindentaions of a PDMS stamp as chemical carrier for wet etching, we can easily get ordered nanoporous template without two-step process. This chemical etching method using a PDMS stamp is very simple, fast and inexpensive. We use two types of PDMS stamps that have different intervals (800nm, 1200nm) and change some parameters have influenced the patterning of being anodized, applied voltage, soaking and stamping time. Through these factors, we demonstrated the patterning effect of large scale PDMS stamp.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.482-484
• /
• 2008

Anodic aluminum oxide (AAO) which prepared with two-step anodizing method (with dissimilar solutions) was used as a template to fabricate highly ordered, free standing metal nano-rods. AAO nano-template technique can realize self-organized hexagonal pore structure with nanometer dimension size, it's easy to control pore diameter, length and density by varying anodizing conditions. Ni and Ni/Fe/Cu multi-metal layer nanorods were electrochemically deposited into AAO nano-template by AC voltage in simple sulfate solutions.. The properties of samples are tested by X-ray diffraction (XRD), field emission microscopy (FE-SEM).

• Corrosion Science and Technology
• /
• 제14권3호
• /
• pp.140-146
• /
• 2015

The commercialization of aluminum had been delayed than other metals because of its high oxygen affinity. Anodizing is a process in which oxide film is formed on the surface of a valve metal in an electrolyte solution by anodic oxidation reaction. Aluminum has thin oxide film on surface but the oxide film is inhomogeneous having a thickness only in the range of several nanometers. Anodizing process increases the thickness of the oxide film significantly. In this study, porous type oxide film was produced on the surface of aluminum in sulfuric acid as a function of electrolyte temperature, and the optimum condition were determined for anodizing film to exhibit excellent cavitation resistance in seawater environment. The result revealed that the oxide film formed at $10^{\circ}C$ represented the highest cavitation resistance, while the oxide film formed at $15^{\circ}C$ showed the lowest resistance to cavitation in spite of its high hardness.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2002년도 춘계학술발표회 초록집
• /
• pp.31-31
• /
• 2002

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.96.2-96.2
• /
• 2007

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.320-320
• /
• 2005

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.17-17
• /
• 2018

• 대한전자공학회논문지SD
• /
• 제47권4호
• /
• pp.69-74
• /
• 2010

알루미늄 양극산화(aluminum anodization)의 선택적인 적용을 통하여 DRAM 소자를 위한 새로운 패키지 기판을 제작하였다. 에폭시 계열의 코어(core)와 구리의 적층 형태로 제작되는 일반적인 패키지 기판과는 달리 제안된 패키지 기판은 아래층 알루미늄(aluminum), 중간층 알루미나(alumina, $Al_2O_3$) 그리고 위층 구리(copper)로 구성된다. 알루미늄 기판에 양극산화 공정을 수행함으로써 두꺼운 알루미나를 얻을 수 있으며 이를 패키지 기판의 유전체로 사용할 수 있다. 알루미나층 위에 구리 패턴을 배치함으로써 새로운 2층 금속 구조의 패키지 기판을 완성하게 된다. 또한 알루미늄 양극산화를 선택적인 영역에만 적용하여 내부가 완전히 채워져 있는 비아(via) 구조를 구현할 수 있다. 패키지 설계 시에 비아 인 패드(via in pad) 구조를 적용하여 본딩 패드(bonding pad) 및 볼 패드(ball pad) 상에 비아를 배치하였다. 상기 비아 인 패드 배치 및 2층 금속 구조로 인해 패키지 기판의 배선 설계가 보다 수월해지고 설계 자유도가 향상된다. 새로운 패키지 기판의 주요 설계인자를 분석하고 최적화하기 위하여 테스트 패턴의 2차원 전자기장 시뮬레이션 및 S-파라미터 측정을 진행하였다. 이러한 설계인자를 바탕으로 모든 신호 배선은 우수한 신호 전송을 얻기 위해서 $50{\Omega}$의 특성 임피던스를 가지는 coplanar waveguide(CPW) 및 microstrip 기반의 전송선 구조로 설계되었다. 본 논문에서는 패키지 기판 구조, 설계 방식, 제작 공정 및 측정 등을 포함하여 양극산화 알루미늄 패키지 기판의 특성과 성능을 분석하였다.