• Journal of Communications and Networks
• /
• 제5권3호
• /
• pp.202-214
• /
• 2003

The central challenge in the design of ad-hoc networks is the development of dynamic routing protocol that efficiently finds route between mobile nodes. Several routing protocols such as DSR, AODV and DSDV have been proposed in the literature to facilitate communication in such dynamically changing network topology. In this paper, a Node Transition Probability (NTP) based routing algorithm, which determines stable routes using the received power from all other neighboring nodes is proposed. NTP based routing algorithm is designed and implemented using Global Mobile Simulator (GloMoSim), a scalable network simulator. The performance of this routing algorithm is studied for various mobility models and throughput, control overhead, average end-to-end delay, and percentage of packet dropped are compared with the existing routing protocols. This algorithm shows acceptable performance under all mobility conditions. The results show that this algorithm maximizes the bandwidth utilization during heavy traffic with lesser overhead.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권5호
• /
• pp.1618-1637
• /
• 2014

Clustering wireless sensor network is an efficient way to reduce the energy consumption of individual nodes in a cluster. In clustering, multihop routing techniques increase the load of the Cluster head near the sink. This unbalanced load on the Cluster head increases its energy consumption, thereby Cluster heads die faster and create an energy hole problem. In this paper, we propose an Energy Balancing Cluster Head (EBCH) in wireless sensor network. At First, we balance the intra cluster load among the cluster heads, which results in nonuniform distribution of nodes over an unequal cluster size. The load received by the Cluster head in the cluster distributes their traffic towards direct and multihop transmission based on the load distribution ratio. Also, we balance the energy consumption among the cluster heads to design an optimum load distribution ratio. Simulation result shows that this approach guarantees to increase the network lifetime, thereby balancing cluster head energy.

• Carbon letters
• /
• 제11권1호
• /
• pp.13-21
• /
• 2010

Coconut shell activated carbon (CSAC) was investigated for its ability in the removal of two neutral chlorinated organic compounds, namely trichloroethylene (TCE) and dichloromethane (DCM) from aqueous solution using a packed bed column. The efficiency of the prepared activated carbon was also compared with a commercial activated carbon (CAC). The important design parameters such as flow rate and bed height were studied. In all the cases the lowest flow rate (5 mL/min) and the highest bed height (25 cm) resulted in maximum uptake and per cent removal. The experimental data were analysed using bed depth service time model (BDST) and Thomas model. The regeneration experiments including about five adsorption-desorption cycles were conducted. The suitable elutant selected from batch regeneration experiments (25% isopropyl alcohol) was used to desorb the loaded activated carbon in each cycle.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.998-1007
• /
• 2018

The advent of Wireless Sensor Networks (WSN) has led to their use in numerous applications. Sensors are autonomous in nature and are constrained by limited resources. Designing an autonomous topology with criteria for economic and energy conservation is considered a major goal in WSN. The proposed honey-hive clustering consumes minimum energy and resources with minimal transmission delay compared to the existing approaches. The honey-hive approach consists of two phases. The first phase is an Intra-Cluster Min-Max Discrepancy (ICMMD) analysis, which is based on the local honey-hive data gathering technique and the second phase is Inter-Cluster Frequency Matching (ICFM), which is based on the global optimal data aggregation. The proposed data aggregation mechanism increases the optimal connectivity range of the sensor node to a considerable degree for inter-cluster and intra-cluster coverage with an improved optimal energy conservation.

• 한국결정성장학회지
• /
• 제13권4호
• /
• pp.153-156
• /
• 2003

Pure and Ethylenediaminetetraacetic acid (EDTA) doped L-arginine phosphate (LAP) single crystals were grown from the aqueous solution by temperature lowering method. The effect of EDTA additive on the solubility and metastable zone width of LAP solution has been investigated. Addition of EDTA has enhanced the metastable zone width of LAP and hence bulk crystals could be grown. The growth rate along the [100] direction increases with EDTA additive. Powder X-ray diffraction and FTIR studies reveal the absence of EDTA in the lattice of LAP, This reveals that the addition of EDTA to LAP doesn't influence the crystallinity. However, the transmittance and NLO properties significantly increase with EDTA additive and hence bulk LAP crystals are useful for laser fusion experiments.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.128-132
• /
• 2013

L-Arginine semi-oxalate (LASO) single crystal has been grown by solution growth technique at room temperature. The crystal structure and lattice parameters were determined for the grown crystal by single crystal X-ray diffraction studies. Photoluminescence studies confirm the violet fluorescence emission peak at 395 nm. Optical constants like band gap, refractive index, reflectance, extinction coefficient and electric susceptibility were determined from UV-VIS-NIR spectrum. The dielectric constant, dielectric loss and ac conductivity of the compound were calculated at different temperatures and frequencies to analyze the electrical properties. The solid state parameters such as plasma energy, Penn gap, Fermi energy and polarizability were calculated to analyze second harmonic generation (SHG). Nonlinear optical property was discussed to confirm the SHG efficiency of the grown crystal.

• Journal of Electrical Engineering and Technology
• /
• 제5권1호
• /
• pp.171-178
• /
• 2010

Resonant parametric perturbation (RPP) method is an effective non-feedback method for controlling chaos. In this paper, the above method is applied for the current programmed buck-boost dc-dc converter which exhibits chaotic for wide parameter variations. The different possible operating regimes leading to chaotic operation of the current mode controlled buck-boost converter is discussed and the control of chaos by RPP method is demonstrated through computer simulations and experimental studies. The converter is stabilized to period 1 operation practically.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.928-938
• /
• 2013

This paper proposes a novel control method for a multi-output switched-resonant converter. Output voltage can be regulated against variations in the supply voltage and load by controlling the voltage of the resonant capacitor (pulse amplitude control). Precise control is possible when pulse amplitude control is combined with pulse number control. The converter is analyzed, and design considerations are explained by using examples. Control implementation is described and load regulation and ripples are analyzed by simulation and hardware results. The topology is modified to obtain an additional negative output without any additional hardware other than a diode. The analysis of such a triple output converter with two positive outputs and one negative output is conducted and confirmed. The topology and control scheme are scalable to any number of outputs.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1230-1232
• /
• 2003

This study aims to extract maximum geological information using the ASTER (Advanced Spaceborne Thermal Emission and Reflection radiometer) images of a part of south India. The area chosen for this study is characterized by rock types such as Migmatite, Magnetite Quartzite, Charnockite, Granite, dykes, Granitoid gneiss and Ultramafic rocks, and minerals such as Bauxite, Magnesite, Iron ores, Calcite etc. Advantage was taken of the characteristic reflectance and absorption phenomenon in the VNIR, SWIR and TIR bands for these rocks and minerals, and they were mapped in detail. Image processing methods such as contrast stretching, PC analysis, band ratios and fusion were used in this study. The results of the processing matched with the field details and showed additional details, thus demonstrating the usefulness of ASTER (especially the SWIR bands) data for better geological mapping.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.257-259
• /
• 2003

Landuse maps are prepared from satellite imagery and field observations were conducted at various locations in the study area. Compared to the field data and NDVI and RVI thematic maps, NDVI is better than RVI, because it compensates for changing illumination conditions, surface slope, aspect and other factors. Clouds, water and snow have negative values for RVI and NDVI. Rock and bare soils have similar reflectance in both NIR and visible band, so RVI and NDVI are near zero. In forest areas with good vegetation cover, NDVI is high and landslide occurrence is less. But if annual and biennial vegetations are present and if cultivation practices are changed frequently, NDVI is medium and landslide occurrence is moderate. In areas where deforestation and settlement is in progress, NDVI is less and landslide occurrence is more. The NDVI FCC thematic map may be used as an important layer in GIS application for landslide studies. Analyzing other layers such as slope, rainfall, soil, geology, drainage, lineament, etc with NDVI FCC layer will give a better idea about the identity of landslide prone areas.