• 한국통신학회논문지
• /
• 제21권1호
• /
• pp.206-213
• /
• 1996

The spectral-domain methos has been applied to an analysis of a open microstrip line on a dielectrically biaxial anisotropic substrate which takes into account both weak and tight anisotropy effect, which are very important in high-requency applications such as optical modulator, MMIC, etc.. Numerical results of propagation characteristics are validated against the data previously published for special dielectrically weak anisotropic cases(sapphire, Epsilam-10) and New data are calculated for dielectrically tight anisotropic case(LiNb $O_{3}$). Data are for these anisotropic substrates presented to illustrate the effect of three different orientations of the principle dielectric axes. It can be derived from the calculated data in this paper that component of dielectric tensor(.epsilon.$_{vv}$ ) in y-axis which is normal to microstrip-laid plane is important factor in propagation characteristics.

• 한국자기공명학회논문지
• /
• 제10권1호
• /
• pp.1-37
• /
• 2006

General expressions for solid state NMR lines are described for transitions under static, magic angle spinning, and variable angle spinning conditions in the case where the principal axis system for the anisotropic chemical shift tensor is noncoincident with that of the quadrupole coupling tensor. It is demonstrated that solid state NMR powder pattern simulation program VMAS based on the conventional grid point method of integrating over the Euler angle space is fast enough in comparison with the POWDER simulation package and Gauss-point method.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1522-1539
• /
• 2002

In the present study, an explicit algebraic stress model is shown to be the exact tensor representation of algebraic stress model by directly solving a set of algebraic equations without resort to tensor representation theory. This repeals the constraints on the Reynolds stress, which are based on the principle of material frame indifference and positive semi-definiteness. An a priori test of the explicit algebraic stress model is carried out by using the DNS database for a fully developed channel flow at Rer = 135. It is confirmed that two-point correlation function between the velocity fluctuation and the Laplacians of the pressure-gradient i s anisotropic and asymmetric in the wall-normal direction. Thus, a novel composite algebraic Reynolds stress model is proposed and applied to the channel flow calculation, which incorporates non-local effect in the algebraic framework to predict near-wall behavior correctly.

• 전기의세계
• /
• 제20권6호
• /
• pp.19-21
• /
• 1971

Permittivities are closely related to lattice vibrations and dispersions relations, and this paper deals with the tensor permittivities which include the effect of diffusion. It is a great convenience in the consideration of plasma waves to treat the plasma as a dielectric medium with its circumference. And, on the assumption that the motion of the ionized donors be neglected the general expression from which the tensor permittivity can be derived is derived from the view point that the plasma can be treated as a hydrodynamical fluid. The effect of diffusion appears as perturbation terms in the tensor permittivities of the non-streaming solid state electron magnetoplasmas and affects no influence on the anisotropic terms in the specific configuration.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.173-176
• /
• 2000

Finite element model based on the Naghdi's shell theory in the general tensor-based form is formulated in the present study. Partial mixed variational functional for assumed strain is formulated in order to avoid the severe locking troubles known as transverse shear and membrane locking. The proposed assumed strain element in general tensor Naghdi's shell model provides very accurate solutions for thin shells in benchmark problems. In additions, linear elastic constitutive equations are given in the general curvilinear coordinate system including anisotropic layered structures. Thus laminated composited shell structures are easily analyzed in the present formulation.

• 비파괴검사학회지
• /
• 제22권2호
• /
• pp.140-148
• /
• 2002

중수로 압력관으로 사용되는 Zr-2.5Nb 재료의 고온 이방성 탄성계수를 고온 초음파공명분광법(RUS)로 측정하였다. 소형 가열로 내에 알루미나 waveguide와 광대역 초음파 센서를 사용하여 초음파에너지를 시편에 가하고 시편의 공명주파수를 측정하였다. 압력관의 축 방향, 반경 방향, 원주 방향에 일치하도록 장방형 시편을 가공하였으며 각 방향에 대한 탄성계수 텐서 9개의 값을 상온${\sim}500^{\circ}C$ 온도 구간에서 측정하였다. 탄생계수 텐서, $c_{ij}$는 모두 온도가 증가함에 따라 점진적으로 감소하며 원주 방향의 탄성계수가 축 방향 및 반경 방향의 탄성계수보다 높았다. 이것은 Young's modulus나 shear modulus의 경우에도 일치하였으며 축 방향과 반경 방향의 경우 큰 차이를 나타내지 않았다. 축 방향 및 반경 방향의 비틀림 탄생계수가 $150^{\circ}C$ 부근에서 서로 교차하였으며 이는 단결정 지르코늄의 $c_{44}$ 및 $c_{66}$의 교차 현상과 일치하였다.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.385-390
• /
• 2008

For taking account of the two-dimensional magnetic properties of a grain-oriented electrical steel sheet, the effective anisotropic tensor reluctivity is examined, and a computationally efficient algorithm is suggested by using the response surface method to model the two-dimensional magnetic properties. It is shown that the reconstructed two-dimensional magnetic properties are fairly effective to stabilize the convergence characteristics of the Newton-Raphson iteration in the nonlinear magnetic field analysis.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2001년도 제6차 학술대회 초록집
• /
• pp.155-161
• /
• 2001

Anisotropic DWI - Mapping of the Proton Diffusion "tensor". In neural ordered tissue, it is thought that water diffusion is mainly influenced by the presence of myelin sheaths and intracellular structures. Perpendicular to the fiber tracts, the cholesterol-laden myelin lipid bilayers might restrict or hinder the spins from diffusing through the normally highly permeable cytomembrane. Diffusion along the fiber is more or less determined by subcellular structures, such as the endoplasmatic reticulum, mitochondria, neuro-filaments and macromolecules. In addition to that, the entire complex of axons and stabilizing tissue (i.e., glia cells, astrocytes) is also assumed to influence diffusion due to the tortuosity of proton translation, but the uniform distribution of such cells throughout the brain might render this notion less important as initially anticipated.

• 대한기계학회논문집
• /
• 제15권5호
• /
• pp.1657-1664
• /
• 1991

본 연구에서는 재료의 이방성을 고려한 점소성 모델을 제시하였다. 공학적 인 견지에서 볼 때 이방성 재료의 기계적 거동을 표한하기 위해서는 단순화 이론(si- mplified theory)의 개발이 필요하게 되었으며 이에따라 Betten은 등방성 소성 포텐셜 (isotropic plastic potential)에서 응력텐서를 재료의 이방성을 포함하는 변환 응력 텐서(mapped stress tensor)로 대체함으로써 이방성을 고려하였다. 그러므로 실제 이방성 재료의 비탄성 거동은 가상의 등방성 상태로 치환되며 여기에 소성 포텐셜 이 론을 적용하게 된다.

• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.902-909
• /
• 2004

A steady-state Reynolds averaged Navier-Stokes simulation was conducted to investigate the distribution of the Reynolds stress tensor inside tip leakage vortex of a linear compressor cascade. Two different inlet flow angles ${\beta}=29.3^{\circ}$(design condition) and $36.5^{\circ}$(off-design condition) at a constant tip clearance size of $1\%$ blade span were considered. Classical methods of solid mechanics, applied to view the Reynolds stress tensor in the principal direction system, clearly showed that the high anisotropic feature of turbulent flow field was dominant at the outer part of tip leakage vortex near the suction side of the blade and endwall flow separation region, whereas a nearly isotropic turbulence was found at the center of tip leakage vortex. There was no significant difference in the anisotropy of the Reynolds normal stresses inside tip leakage vortex between the design and off-design condition.