• 한국자기학회지
• /
• 제8권5호
• /
• pp.261-269
• /
• 1998

스퍼터링 중 500~600 Oe의 자기장을 인가한 상태에서 제조된 비정징 Sm-Fe 합금 박막에서 6$\times$104 J/m3 크기의 유도자기이방성이 형성되었다. 자장 증착에 이해유도자기이방성이 형성된 합금 박막은 이방성이 형성되지 않은 합금 박막에 비해 자구 구조에 무관한 "포화" 자기변형은 유사하지만, 측정 방향에 따른 자기변형의 이방성 비는 최대 35 정도로서 매우 크게 증가하였다. 이는 자기변형 박막의 디바이스 응용시 성능을 크게 향상시키므로, 실용적인 측면에서 매우 중요하다. 스퍼터링 중 자기장을 인가하지 않고 통상의 마그네트론 스퍼터링에 의해 제조된 비정질 Sm-Fe 합금 박막을 넓은 조성 범위에 걸쳐서 체계적으로 소자한 결과, 이러한 합금 박막에서도 미약하나마 스퍼터링 중의 누설 자계에 의해 증착 도중 유도자기이방성이 형성되는 것을 관찰하였으며, 최대의 유도자기이방성은 Sm 함량 25~30 원자%에서 얻어졌다. 또한 본 합금 박막의 유도자기이방성은 자장 중 열처리에 의해서도 형성되는 것을 관찰하였는데, 형성된 이방성의 크기는 자장 증착에 의해 제조된 시료보다 매우 작게 나타났다. 이는 자장 증착의 경우 원자의 표면 확산을 통한 원자의 이동에 의해 유도자기이방성이 형성되나, 증착 후 자장 열처리에 의한 경우는 체적 확산에 의해 유도자기이방성이 형성되기 때문으로 생각된다.때문으로 생각된다.

• 대한화학회지
• /
• 제28권1호
• /
• pp.34-40
• /
• 1984

라만 분광법을 사용하여 순수한 액체 상태의 $C_6F_6$의 재배치 운동을 연구하였다. 라만 스펙트럼 중 ${\nu}_2$와 ${\nu}_16$ 밴드를 선정하여 그 모습을 293~333K온도 범위에서 측정하였다. 분자의 주대칭축($C_{6-}$축)의 회전 및 스핀운동에 관한 회전 확산 상수 ($D_{\bo}$, $D_{\parallel}$)가 온도의 함수로써 결정되었으며 이로부터 $C-6F_6$의 재배치운동은 명백히 비등방적임을 알게 되었다. 실험 결과를 유체역학적 모델로 분석하여 본 결과 주대칭축의 회전운동은 확산적이며 스핀운동은 관성적이라는 것이 밝혀졌다.

• 한국결정성장학회지
• /
• 제14권3호
• /
• pp.95-100
• /
• 2004

This paper reports a potential problem in the electrical performance of the silicide film to silicon contacts with respect to the scaling trend in integrated circuit (IC) devices. The effects of elastic strain on the agglomeration of the coherent silicide film embedded in an infinite matrix are studied employing continuum linear elasticity and finite-difference numerical method. The interface atomic diffusion is taken to be the dominant transport mechanism where both capillarity and elastic strain are considered for the driving forces. Under plane strain condition with elastically homogeneous and anisotropic system with cubic symmetry, the dilatational misfit and the tetragonal misfit in the direction parallel to the film thickness are considered. The numerical results on the shape evolution agree with the known trend that the equilibrium aspect ratio of the film increases with the elastic strain intensity. When the elastic strain intensity is taken to be only a function of the film size, the flat film morphology with a large aspect ratio becomes increasingly unstable since the equilibrium aspect ratio decreases, as the film scales. The shape evolution results in a large decrease in contact to silicon area, and may deteriorate the electrical performances.

• 한국지능시스템학회논문지
• /
• 제25권4호
• /
• pp.412-417
• /
• 2015

Kinect sensor has two output data which are produced from red green blue (RGB) sensor and depth sensor, it is called color image and depth map, respectively. Although this device's prices are cheapest than the other devices for three-dimensional (3D) reconstruction, we need extra work for reconstruct a smooth 3D data and also have semantic meaning. It happened because the depth map, which has been produced from depth sensor usually have a coarse and empty value. Consequently, it can be make artifact and holes on the surface, when we reconstruct it to 3D directly. In this paper, we present a method for solving this problem by using implicit surface representation. The key idea for represent implicit surface is by using radial basis function (RBF) and to avoid the trivial solution that the implicit function is zero everywhere, we need to defined on-surface point and off-surface point. Based on our simulation results using captured face as an input, we can produce smooth 3D face and fill the holes on the 3D face surface, since RBF is good for interpolation and holes filling. Modified anisotropic diffusion is used to produced smoothed surface.

• 한국환경과학회지
• /
• 제19권2호
• /
• pp.137-148
• /
• 2010

This paper investigates the characteristics of turbulence schemes. Turbulence closures are fundamental for modeling the atmospheric diffusion, transport and dispersion in the boundary layer. In particular, in non-homogeneous conditions, a proper description of turbulent transport in planetary boundary layer is fundamental aspect. This study is based on the Regional Atmospheric Modeling System (RAMS) and combines four different turbulence schemes to assess if the different schemes have a impact on simulation results of vertical profiles. Two of these schemes are Isotropc Deformation scheme (I.Def) and Anisotropic deformation scheme (A.Def) that are simple local scheme based on Smagorinsky scheme. The other two are Mellor-Yamada scheme (MY2.5) and Deardorff TKE scheme (D.TKE) that are more complex non-local schemes that include a prognostic equation for turbulence kinetic energy. The simulated potential temperature, wind speed and mixing ratio are compared against radiosonde observations from the study region. MY2.5 shows consistently reasonable vertical profile and closet to observation. D.TKE shows good results under relatively strong synoptic condition especially, mixing ratio simulation. Validation results show that all schemes consistently underestimated wind speed and mixing ratio but, potential temperature was somewhat overestimated.

• 마이크로전자및패키징학회지
• /
• 제23권4호
• /
• pp.69-77
• /
• 2016

We propose nano-scale Cu direct bonding technology using ultra-high density Cu nano-pillar (CNP) with for high stacking yield exascale 2.5D/3D integration. We clarified the joining mechanism of nano-scale Cu direct bonding using CNP. Nano-scale Cu pillar easily bond with Cu electrode by re-crystallization of CNP due to the solid phase diffusion and by morphology change of CNP to minimize interfacial energy at relatively lower temperature and pressure compared to conventional micro-scale Cu direct bonding. We confirmed for the first time that 4.3 million electrodes per die are successfully connected in series with the joining yield of 100%. The joining resistance of CNP bundle with $80{\mu}m$ height is around 30 m for each pair of $10{\mu}m$ dia. electrode. Capacitance value of CNP bundle with $3{\mu}m$ length and $80{\mu}m$ height is around 0.6fF. Eye-diagram pattern shows no degradation even at 10Gbps data rate after the lamination of anisotropic conductive film.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.160.2-160.2
• /
• 2014

Recently silicon has attracted intense interest as a promising anode material of lithium-ion batteries due to its extremely high capacity of 4200 mA/g (for Li4.2Si) that is much higher than 372 mAh/g (for LiC6) of graphite. However, it seriously suffers from large volume change (even up to 300%) of the electrode upon lithiation, leading to its pulverization or mechanical failure during lithiation/delithiation processes and the rapid capacity fading. To overcome this problem, Si nanowires have been considered. Use of such Si nanowires provides their facile relaxation during lithiation/delithiation without mechanical breaking. To design better Si electrodes, a study to unveil atomic-scale mechanisms involving the volume expansion and the phase transformation upon lithiation is critical. In order to investigate the lithiation mechanism in Si nanowires, we have developed a reactive force field (ReaxFF) for Si-Li systems based on density functional theory calculations. The ReaxFF method provides a highly transferable simulation method for atomistic scale simulation on chemical reactions at the nanosecond and nanometer scale. Molecular dynamics (MD) simulations with the ReaxFF reproduces well experimental anisotropic volume expansion of Si nanowires during lithiation and diffusion behaviors of lithium atoms, indicating that it would be definitely helpful to investigate lithiation mechanism of Si electrodes and then design new Si electrodes.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2005년도 춘계학술발표대회
• /
• pp.1661-1664
• /
• 2005

본 논문에서는 computer-aided analysis 의 일환으로 X-ray 심혈관 조영도를 이용하여 관상동맥의 구조를 보여주는 방법에 대해 제시하고자 한다. 관상동맥 폐색증 환자들에게 시술되는 스텐트 삽입 시술이나 관상동맥 우회로 시술을 할 때에는 X-ray 의 조영 영상이 매우 중요한 시술의 기준이 되고 있으며, 조영 영상에서 혈관을 빠르고 정확하게 인식하는 것은 시술의 필수 조건이다. 이러한 시술중의 혈관구조 인식을 돕기 위하여 본 논문에서는 심혈관 조영 영상으로부터 관상동맥의 골격을 추출하기 위한 방법을 제안한다. 본 논문에서는 혈관 구조 추출을 위하여 3 단계 알고리즘을 제시한다. 첫번째 단계에서는 조영도에서 잡음을 제거하기 위하여 동질영역을 블러링할 수 있는 speckle reducing anisotropic diffusion 을 이용한 이미지 필터링을 수행한다. 이 필터링은 영상내 잡음을 제거하고 혈관의 경계선을 강화하여 정확한 영상인식을 가능하게 한다. 두번째 단계에서는 영상 내에서 보여지는 주요 혈관을 분할하는 것이다. 이 영상분할에는 canny edge detection 과 개선된 영역확장법(adaptive region growing)을 동시에 이용하는 복합적 분할기법이 수행된다. 세번째 단계에서는 형태학적 기법(Morphology)을 이용하여 분할결과의 부족한 부분을 보완하고 골격화를 수행하여 정확한 혈관 구조를 추출해낸다. 실험을 위해서는 정상인의 관상동맥 영상 뿐 아니라 혈관이 가늘어지는 폐색이 관찰되는 환자의 영상에 대해서도 실험하였다. 또한 논문에서 제시한 알고리즘에 대한 검증을 위하여 실험 결과들은 의료진의 감수를 거쳤다.

• 대한원격탐사학회지
• /
• 제36권4호
• /
• pp.503-513
• /
• 2020

This paper presents a method to evaluate denoising filters based on edge locations in their denoised images. Image quality assessment has often been performed by using structural similarity (SSIM). However, SSIM does not provide clearly the geometric accuracy of features in denoised images. Thus, in this paper, a method to localize edge locations with subpixel accuracy based on adaptive weighting of gradients is used for obtaining the subpixel locations of edges in ground truth image, noisy images, and denoised images. Then, this paper proposes a method to evaluate the geometric accuracy of edge locations based on root mean squares error (RMSE) and jaggedness with reference to ground truth locations. Jaggedness is a measure proposed in this study to measure the stability of the distribution of edge locations. Tested denoising filters are anisotropic diffusion (AF), bilateral filter, guided filter, weighted guided filter, weighted mean of patches filter, and smoothing filter (SF). SF is a simple filter that smooths images by applying a Gaussian blurring to a noisy image. Experiments were performed with a set of simulated images and natural images. The experimental results show that AF and SF recovered edge locations more accurately than the other tested filters in terms of SSIM, RMSE, and jaggedness and that SF produced better results than AF in terms of jaggedness.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.25-28
• /
• 2016

In the present study, bulk anisotropic nanocrystalline $SmCo_5$ magnets were prepared by hot deformation. The effect of deformation temperature on the texture and magnetic properties are presented, based on which the mechanism of plastic deformation and texture formation during the hot deformation process is discussed. Our analyses reveal that deformation temperature is one of the most important parameters that determine the texture of $SmCo_5$ grains. We suggest that diffusion creep plastic deformation occurs during hot deformation, which is very sensitive to the energy gain provided by an increase in temperature.