• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.139.3-139
• /
• 1998

• Composites Research
• /
• 제23권4호
• /
• pp.7-13
• /
• 2010

체적 적분방정식법(Volume Integral Equation Method)이라는 새로운 수치해석 방법을 이용하여, 서로 상호작용을 하는 이방성 함유체를 포함하는 등방성 무한고체가 정적 인장하중을 받을 때 무한고체 내부에 발생하는 응력분포 해석을 매우 효과적으로 수행하였다. 즉, 등방성 기지에 다수의 이방성 함유체가 1) 정사각형 배열 형태 또는 2) 정육각형 배열 형태로 포함되어 있는 경우에 대하여, 다양한 함유체의 체적비에 대하여, 중앙에 위치한 이방성 함유체와 등방성 기지의 경계면에서의 인장응력 분포의 변화를 구체적으로 조사하였다. 또한, 단일의 이방성 함유체에 대한 체적 적분방정식법을 이용한 해와 해석해를 비교해 봄으로서, 체적 적분방정식법을 이용하여 구한 해의 정확도를 검증하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.629-632
• /
• 2013

Many properties of inorganic compounds are sensitive to changes in the point-defect concentrations. In minerals, such changes are influenced by temperature, pressure, and chemical impurities. Olivines form an important class of minerals and are magnesium-rich solid solutions consisting of the orthosilicates forsterite $Mg_2SiO_4$ and the fayalite $Fe_2SiO_4$. Orthosilicates have an orthorhombic crystal structure and exhibit anisotropic electronic and ionic transport properties. We examined the anisotropy of the electrical conductivity of $Fe_2SiO_4$ under the assumption that the electronic conduction in $Fe_2SiO_4$ occurs via a small polaron hopping mechanism. The anisotropic electrical conductivity is well explained by the electron transfer integrals obtained from the spin dimer analysis based on tight-binding calculations. The latter analysis is expected to provide insight into the anisotropic electrical conductivities of other magnetic insulators of transition metal oxides.

• 한국재료학회지
• /
• 제17권9호
• /
• pp.500-506
• /
• 2007

The effects of anisotropic surface energy on the microstructure development of porous materials have been studied through Monte Carlo simulation using a three dimensional lattice. The changes in porosity ($f_v$), mean grain diameter ($D_s$), fraction of connected pores ($f_{v,c}$) and contiguity of the solid phase (C) were examined in cases with three different ${\gamma}_{SV}$ relations and initial grain diameters ($D_{s,o}$). It has been found that larger ${\gamma}_{SV}$ enhances sintering of particles and increases C and does not change $D_s$. And Introducing anisotropic ${\gamma}_{SV}$ brought an increase in $f_v$ and $f_{v,c}$ and an decrease in $D_s$ and C, and this tendency become more marked for fine $D_{s,o}$.

• 복합신소재구조학회 논문집
• /
• 제5권4호
• /
• pp.1-10
• /
• 2014

A progressive failure analysis procedure for composite laminates is developed in here and in the companion paper. An anisotropic plastic constitutive model for fiber-reinforced composite material, is developed, which is simple and efficient to be implemented into computer program for a predictive analysis procedure of composites. In current development of the constitutive model, an incremental elastic-plastic constitutive model is adopted to represent progressively the nonlinear material behavior of composite materials until a material failure is predicted. An anisotropic initial yield criterion is established that includes the effects of different yield strengths in each material direction, and between tension and compression. Anisotropic work-hardening model and subsequent yield surface are developed to describe material behavior beyond the initial yield under the general loading condition. The current model is implemented into a computer code, which is Predictive Analysis for Composite Structures (PACS), and is presented in the companion paper. The accuracy and efficiency of the anisotropic plastic constitutive model are verified by solving a number of various fiber-reinforced composite laminates with and without geometric discontinuity. The comparisons of the numerical results to the experimental and other numerical results available in the literature indicate the validity and efficiency of the developed model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2465-2470
• /
• 2007

We have analyzed the three-dimensional thermal conduction in anisotropic materials using nonsymmetric-Fourier transforms. And a complete theoretical treatment of the photothermal deflection spectroscopy has been performed for thermal conductivity measurement in anisotropic medium. Thermal conductivity tensor was determined by the deflection angle and phase angle with the relative position between the heating and probe beams. The influence of the parameters, such as modulation frequency of the heating beam, the thermal conductivity tensor, was investigated.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1384-1391
• /
• 2006

The problem of an infinite anisotropic material with a crack inclined with respect to the principal material axes is analyzed. The material is subjected to uniform biaxial load along its boundary. It is assumed that the material is homogeneous, but anisotropic. By considering the effect of the horizontal load, the distribution of stresses at the crack tip is analyzed. The problem of predicting critical stress in anisotropic solids which is a subject of considerable practical importance is examined and the effect of load biaxiality is made explicitly. The present results based on the normal stress ratio theory show significant effects of biaxial load, crack inclination angle and fiber orientation on the critical stress. The analysis is performed for a wide range of the crack angles and biaxial loads.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.481-486
• /
• 1997

This paper describes the anisotropic etching characteristics of Si in acqueous TMAH/IPA solutions. The etch rates of (100) oriented Si crystal planes decrease with increasing TMAH concentration and IPA concentration. Etchant concentration and etch temperature have a large effect on hillock density. Hillock density strongly increase with lower TMAH concentration and higher etch temperature. The etched (100) planes are covered by pyramidal-shaped hillocks below TMAH 15 wt.%, but very smooth surface is obtained TMAH 25 wt.%. The addition of IPA to TMAH solution leads to smoother surfaces of sidewalls etched planes. Undercutting ratio of pure TMAH solution is much higher than KOH. But, addition of IPA to TMAh the underrcutting ratio reduces by a factor of 3∼4. Therefore, acqueous TMAH/IPA solution is able to use as anisotropic etchant of Si because of full compability with IC fabrication process.

• Computers and Concrete
• /
• 제5권4호
• /
• pp.417-434
• /
• 2008

This paper deals with damage induced anisotropy modeling for concrete-like materials. A thermodynamics based constitutive relationship is presented coupling anisotropic damage and elasticity, the main idea of the model being that damage anisotropy is responsible for the dissymmetry tension/compression. A strain written damage criterion is considered (Mazars criterion extended to anisotropy in the initial model). The biaxial behavior of a family of anisotropic damage model is analyzed through the effects of yield surface modifications by the introduction of new equivalent strains.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.125-127
• /
• 1996

This paper deals with the fabrication of 4 poles anisotropic Sr·ferrite plastic magnets. After Polyamide6 and polyamlde12 are kneaded respectively with Sr·ferrite powder, silane coupling and calcium stearate of lwt% are added for coating and pelleting. The pelleted specimen are injection-moulded under the magnetic field using 4 poles mould. For 4 poles anisotropic Sr·ferrite plastic magnets with polyamide6 as a binder, the surface magnetic flux density distribution is +943.8∼-943.87kG and the deviation is 5.2%, where as with polyamide12, the distribution is +1040.9∼-1040.9kG and the deviation is 5.4%. It shows that both of the magnet distributions are stable. As the results of the experiments, we find 4 poles anisotropic Sr·ferrite magnets have good properties as the materials appropriate for manufacturing magnet type synchronous motors.