• Journal of Photoscience
• /
• 제7권1호
• /
• pp.9-13
• /
• 2000

An alternately assembled polycation-anionic dye film was prepared on a precursor assembly of poly(allylamine)hydrochloride (PAH) and poly(sodium styrenesulfonate) (PSS) or of poly (djallyldimethyl)ammonium chloride (PDDA) and PSS. The (PAH/PSS) precursor assembly gave better adsorptivity to the anionic dye than the (PDDA/PSS) one. Four kinds of anionic dyes (EB-T, AR-17 AR-18, AR-27) with different numbers of sulfonate substituents were compared. The extent of dye assembling was higher for the dye with a smaller number of sufonate substituents. Second harmonic generation (SHG) was clearly observed from the films. The SHG signal and the absorption intensity correlated well up to four polycation/dye bilayers, while further assembly did not increase the SHG signal appreciably. Second order nonlinear coefficients for ten bilayer assemblies were the order of pm/V.

• Membrane and Water Treatment
• /
• 제4권3호
• /
• pp.203-214
• /
• 2013

Laboratory tests were performed to determine the efficiency of dye solution desalination by electrodialysis. The study involved anionic dye and mineral salt recovery by obtaining two streams from a salt and dye mixture - dye-rich solution and salt solution. A standard anion-exchange and cation-exchange membranes or monovalent selective anion-exchange membranes were used in the ED stack. It was found that the separation efficiency was strongly dependent on the dye molecular weight. The best results for standard ion-exchange membranes were achieved for the desalination of Direct Black solution. Furthermore, the obtained results implied that the application of monovalent selective anion-exchange membranes improved the recovery of dye and salt solutions - the dye concentration in the diluate remained constant irrespective of the molecular weight of anionic dyes, whereas the salt recovery remained very high (99.5%).

• 한국염색가공학회지
• /
• 제14권3호
• /
• pp.1-10
• /
• 2002

Tencel fabric cationized with chitosan can be effectively dyed with anionic dyes. To investigate the change of dyeing properties of cationized Tencel fabric, some experiments were performed under the several dyeing conditions with acid and reactive dyes. Whiteness index decreased with the increment of crosslinking agent concentration. The cationized Tencel fabric was dyed well by anionic dye such as acid dye, the dyeability of reactive dye was improved by addition of a little salt without alkali. The dye fixation on the cationized Tencel fabric was increased with chitosan concentration without electrolyte and alkali. The dyeability of Tencel treated with chitosan was better than controlled Tencel, especially under the acidic conditions. According to the number and the types of functional group of reactive dyes, dye affinity of the modified Tencel fabric varied and wash fastness of acid dye was better than reactive dye.

• 대한환경공학회지
• /
• 제22권12호
• /
• pp.2135-2139
• /
• 2000

시아노구아니딘-포름알데히드 수지에 의한 음이온성 콜로이드 입자의 응집현상은 음이온성 입자의 표면전하와 디아미노메틸렌우레아(diaminomethylene urea: DU) 이온과의 전기적인 작용에 기인한다고 보고되어 있다. 본 논문에서는 음이온성 염료폐수를 응집처리하기 위하여 100~500 nm의 양이온성 시아노구아니딘-포름알데히드 수지를 합성하였고, 응집제 수용액의 pH가 낮을수록 응집제의 Zeta potential은 높게 측정되었다. 농도 0.4 g/L 반응성 염료폐수를 응집처리하였을 경우 pH가 3, 5, 7, 9, 11 중에서 pH가 3인 조건이 다른 pH조건보다 COD, 색도 제거율이 높게 나타났으며, pH 3인 조건에서 400 ppm 주입시 COD 74%, 색도 90% 정도 제거할 수 있었다.

• Environmental Engineering Research
• /
• 제22권3호
• /
• pp.312-319
• /
• 2017

The treatment of dyeing wastewater is not easy because dyes are mainly aromatic, heterocyclic compounds. The most effective technologies and methods to treat dyeing wastewater are costly and involve materials that are difficult to regenerate after use. Therefore, it is necessary to develop cost-effective, eco-friendly technologies to treat dyeing wastewater. The aim of this study was to investigate the removal of sulfur blue 11 (CI 53235) anionic dye using methyl esterified sericite (ME-sericite) adsorbents in an aqueous solution. The results are discussed in terms of the ME-sericite particle size, temperature, pH value and initial sorption rate according to the initial sulfur blue concentration. In addition, we analyzed the adsorption kinetics using a Pseudo-second-order model with the desorption and reusability. The methyl esterification caused a considerable increase in the specific surface area from 4.45 to $17.62m^2/g$. The ME-sericite adsorbents successfully removed > 98% of the sulfur dye in the aqueous solution. For the adsorption of 1 mg of sulfur dye, approximately 4.6 to 6.6 g/L ME-sericite were required. The desorption process was carried out by mixing a NaOH eluent to desorb 90.56% of the sulfur dye with 2 h of contact time. Thus, the ME-sericite is a promising adsorbent to treat dyeing wastewater due to its low dose requirement, high removal efficiency and inexpensive material.

• 한국응용과학기술학회지
• /
• 제14권1호
• /
• pp.109-115
• /
• 1997

Fluorescent anionic oligo surfactants were synthesized by the condensing products of long chain alkylvinylether-maleic anhydride cooligomers and resorcinol including dye structures. Their various surface activities and dispersing action were studied on the aqueous solution. These oligo surfactants exhibited a remarkable surface tension lowering property, lower foaming and a large dispersing action for the particles of ${\alpha}-copper$ phthalocyanine blue. Further it was ascertained that the binding of oligo surfactant onto the pigment surface caused the deviation towards lower wavelengths at the maximum fluorescent intensity as compared with aqueous oligo surfactant solutions, These surface active properties of the oligo surfactants may be attributed to rigid and hydrophobic structure of dye groups, besides surface-active groups of alkylether groups and carboxylic group of the anionic oligo surfactants.

• Bulletin of the Korean Chemical Society
• /
• 제17권6호
• /
• pp.547-550
• /
• 1996

• 한국염색가공학회지
• /
• 제15권5호
• /
• pp.294-300
• /
• 2003

The anionic agent containing dichloro-s-triazinyl reactive group was synthesized and applied to the cotton fabrics to introduce covalent bonds. This attempt was expected to improve the affinities of cationic compounds, such as cationic dyes, chitosan, quaternary ammonium antimicrobial agents and metal ions, by the electrostatic attractive force. As expected, the anionic agent was reacted with cotton fabrics at room temperature. In order to examine the adsorptivity of the cationic compounds on to the anionized cotton fabrics, firstly a cationic dye(C. I. Basic Violet 7) was applied. The color strength of the dyeing of anioized cotton fabric was highly increased comparing to that of untreated fabric.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.187-198
• /
• 2018

Clay based coating with zwitterionic functionality is used to remove cationic and anionic dyes. Adsorbent coating was prepared by the mixing of bentonite clay, acrylic polymer (AP) and polyethylene-diamine (EPI-DMA). Characterization was performed using SEM-EDX, XRF, X-ray mapping and FTIR analyses. The adsorption capacity of ZACC was found to be increased from 59.35 to 255.99 mg/g and from 45.84 to 70.09 mg/g for BG and AR1 dyes, respectively using initial concentration (50-200 ppm). Significant adsorption capacity along with mechanical and chemical stability formulates ZACC as an excellent composite coating for treatment of anionic and cationic dyes from industrial wastewater.

• 한국염색가공학회지
• /
• 제18권1호
• /
• pp.28-32
• /
• 2006

A multi-layer of the dye, natural colorant Berberine, was successfully developed by the self-assembly deposition from water-soluble cationic dye(Berberine chloride) and anionic polyelectrolyte PSS(Polysodium 4-styrenesulfonate) in aqueous solution via electrostatic attraction. The corresponding results on multi-layer were characterized by UV-Vis absorbance measurements. The growth of multi-layer formed by the sequential interaction was also determined. The findings measured by UV-Vis spectrophotometer showed that the bilayer deposition characteristic was linear and highly reproducible from layer to layer.