• Nuclear Engineering and Technology
• /
• v.46 no.1
• /
• pp.93-100
• /
• 2014

The paper deals with the application of radio isotopic non-destructive technique in the characterization of two industrial grade anion exchange resins Indion GS-300 and Indion-860. For the characterization of the two resins, $^{131}I$ and $^{82}Br$ were used as tracer isotopes to trace the kinetics of iodide and bromide ion-isotopic exchange reactions. It was observed that the values of specific reaction rate ($min^{-1}$), amount of iodide ion exchanged (mmol), initial rate of iodide ion exchange (mmol/min) and log $K_d$ were calculated as 0.328, 0.577, 0.189 and 19.7 respectively for Indion GS-300 resin, which was higher than the respective values of 0.180, 0.386, 0.070 and 17.0 calculated for Indion-860 resins when measured under identical experimental conditions. Also at a constant temperature of $40.0^{\circ}C$, as the concentration of labeled iodide ion solution increases 0.001 M to 0.004 M, the percentage of iodide ions exchanged increases from 75.16 % to 78.36 % for Indion GS-300 resins, which was higher than the increases from 49.65 % to 52.36 % compared to that obtained for Indion-860 resins. The overall results indicate that under identical experimental conditions, Indion GS-300 resins show superior performance over Indion-860 resins.

• Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.16-20
• /
• 2007

Toxicity of metal plating wastewater was evaluated by using acute toxicity tests on Daphnia magna. To identify toxicants of metal plating wastewater, several manipulations such as solid phase extraction (SPE), ion exchange and graduated pH adjustment were used. The SPE test had no significant effect on baseline toxicity, suggesting absence of toxic non-polar organics in metal plating wastewater. However, anion exchange largely decreased the baseline toxicity by 88%, indicating the causative toxicants were inorganic anions. Considering high concentration of chromium in metal plating wastewater, it is thought the anion is Cr(VI) species. Graduated pH test showing independence of the toxicity on pH change strongly supports this assumption. However, as revealed by toxicity confirmation experiment, the initial toxicity of metal plating wastewater (24-h TU=435) was not explained only by Cr(VI) (24-h TU = 725 at $280\;mg\;L^{-1}$). Addition of nickel($29.5\;mg\;L^{-1}$) and copper ($26.5\;mg\;L^{-1}$) largely decreased the chromium toxicity up to 417 TU, indicating antagonistic interaction between heavy metals. This heavy metal interaction was successfully predicted by an equation of 24-h $TU\;=\;3.67\;{\times}\;\ln([Cu]\;+\;[Ni])\;+\;79.44$ at a fixed concentration of chromium.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.8
• /
• pp.606-616
• /
• 2011

The objectives of this study were to evaluate the applicability of adsorption models for adsorption properties of adsorbents. For this study, adsorption experiment of $NO_3^-$ ion using anion exchange resin has been investigated under adsorption equilibrium and kinetic in bach process. Adsorption equilibrium experiment were carried out that two conditions is change of adsorbate concentration and change of adsorbent weight. Experiment results have been analyzed by adsorption isotherm models, energy models and kinetic models. Under the condition of change of adsorbate concentration was best described by Sips and Redlich-Perterson isotherm models. However case of change of adsorbent weight was described by Langmuir isotherm models. It seems reasonable to assume that isotherm model was dominated by multiple mechanism according to experiment condition.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.149-157
• /
• 2012

Experiments for As(V) removal using synthesized $Ca{\cdot}Al$-monosulfate was performed from the water contaminated with arsenate. Monosulfate is known as LDHs (Layered Double Hydroxides) which is one of the anionic clay minerals. Monosulfate was synthesized mixing $C_3A$ (tricalcium aluminate), gypsum (calcium sulfate), and water with an intercalation method. The product form the synthesis was characterized by FE-SEM, WDXRF, PXRD, and FT-IR. Experiments with different doses of monosulfate were carried out for kinetic. As a result of experiment, the concentration of As(V) was reduced from 0.67 mM to 0.19 mM (0.67mM of monosulfate) and 0.178 mM (1.34 mM of monosulfate). The concentration of sulfate was increased with As(V) decrease. The result of PXRD showed that the d-spacing of inter layer ($d_{003}$ peak) was shifted from 8.927 ${\AA}$ to 8.095 ${\AA}$ because the sulfate in the inter layer of monosulfate was exchanged arsenate with water molecules bonded. From the FT-IR results, a new single band (800 cm-1) was observed after the reaction of monosulfate and As(V). The arsenic removal can be regarded as anion exchange mechanism that is one of the characteristics of LDHs from the results of PXRD and FT-IR analysis.

• Korean Journal of Agricultural Science
• /
• v.43 no.2
• /
• pp.186-193
• /
• 2016

This study focused on the evaluation of the antioxidative effects of lotus seeds from golden colored flowers. The lotus seeds were extracted with ethanol and then fractionated into 4 fractions, ethyl acetate (EtOAc), n-butanol, methylene chloride, and n-hexane. The comparison of antioxidative activities of the extract and fractions from the lotus seeds was carried out using an in vitro radical scavenging model and the total phenol content was analyzed. Of the tested extracts and fractions, the EtOAc fraction of the lotus seeds showed the strongest 1,1-diphenyl-2-picrylhydrazyl radical scavenging activity with 96.24% at a concentration of $100{\mu}g/mL$. In addition, the hydroxyl radical scavenging activity of the lotus seed EtOAc fraction was also increased in a concentration dependent manner with the concentrations tested ranging from 5 to $100{\mu}g/mL$. Moreover, the EtOAc fraction showed the highest scavenging activity for nitric oxide and superoxide anion radicals. In particular, of all the extracts and fractions, the EtOAc fraction showed highest contents of total phenols. These results indicate that lotus seeds have potential as an antioxidative agent against oxidative stress involving reactive oxygen species. Furthermore, the EtOAc fraction of lotus seeds includes promising oxidative stress-protective compounds.

• The Korea Journal of Herbology
• /
• v.20 no.2
• /
• pp.103-114
• /
• 2005

Objectives : This studies were carried out to evaluate the effects on anti-oxidation activities in different parts as trunk bark and root bark of Ulmus devidiana Planchon. var. japonica Nakai and Hemipteleae davidii (Hance) Planchon. Methods : For evaluation of antioxidative effects, scavenging activity on superoxide anion radical and DPPH radical were measured. Also, inhibitory activity on LDL oxidation and linoleic acid peroxidation were measured in each samples. In the in vivo test, inhibitory activity on TBARS production, GSH contents in rat liver were measured. SOD, Catalase, GSH-px and ALDH activity were analysed in ethanol extracts of Ulmi Radicis Cortex. Result : 1. Scavenging activity on superoxide anion radical was higher in water extract than in ethanol extract even in low concentration of 50ppm as over 90%. 2. There was no difference between water extract and ethanol extract in the scavenging activity on DPPH radical but, Ulmi Raclicis Cortex and Ulmi Trunci Cortex showed high effect even in low concentration of 10ppm. 3. GSH reduction was prevented and antioxidative activity such as Mn-SOD, GSH-px in the rat liver recovered in the treatment of ethanol extracts of Ulmi Radicis Cortex. Conclusion : Ulmi Radicis Cortex recorded as Ulmi Trunci Cortex in official regulation book. But, it was known that Ulmi Radicis Cortex was more effective than Ulmi Trunci Cortex in most physical activities.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.653-657
• /
• 2006

The adsorption properties for $NO_{2}$ by hybrid ion exchange fiber with resins were investigated. The adsorption of $NO_{2}$ was increased with increasing of adsorption time and the initial concentration. At the initial $NO_{2}$ concentration of 900 ppm, approximately 40% of initial $NO_{2}$ was adsorbed around 20 min. And the adsorption of $NO_{2}$ was decreased with increasing of flow rate from 20 to 40 L/min. The maximum adsorbed amount of initial $NO_{2}$ was 45% at the flow rate of 10 L/min. The amount of adsorption was increased with increasing the water content.

• Corrosion Science and Technology
• /
• v.7 no.1
• /
• pp.40-44
• /
• 2008

Passive metal forms an interfacial diffuse layer on the surface of passive film by its reaction with $H^+$ or $OH^-$ ions in solution depending on solution pH. There is a critical pH, called pH point of iso-selectivity ($pH_{pis}$) at which the nature of the diffuse layer is changed from the anion-permeable at pH<$pH_{pis}$ to the cation-permeable at pH>$pH_{pis}$. The $pH_{pis}$ for a passivated Fe was determined by examining the effects of pH on the thickness of passive film and on the dissolution reaction occurring on the passive film under a gavanostatic reduction in borate-phosphate buffer solutions at various pH of 7~11. The steady-state thickness of passive film formed on Fe showed the maximum at pH 8.5~9, and further the nature of film dissolution reaction was changed from a reaction producing $Fe^{3+}$ ion at $pH\leq8.5$ to that producing $FeO_2{^-}$ at $pH\geq9$, suggesting that the $pH_{pis}$ of Fe is about pH 8.5~9. In addition, the passive film formed at pH 8.5~9, $pH_{pis}$, was found to be the most protective with the lowest defect density as confirmed by the Mott-Schottky analysis. Pitting potential was decreased with increasing $Cl^-$ concentration at $pH\leq8.5$ due probably to the formation of anion permeable diffuse layer, but it was almost constant at $pH\geq9$ irrespective of $Cl^-$ concentration due primarily to the formation of cation permeable diffuse layer on the film, confirming again that $pH_{pis}$ of Fe is 8.5~9.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.21 no.4
• /
• pp.69-89
• /
• 2008

Purpose: This study was performed to evaluate anti-oxidant activities and anti-inflammatory effects of Sungyoutanggagambang(SYTG). Methods: In the study of anti-oxidant activities. SYTG was investigated by DPPH radical scavenger activity. superoxide dismutase activity and superoxide anion radical scavenger activity. In the study of anti-inflammatory effects. SYTG was investigated using cultured cells and murine models. As for the parameters of inflammation. levels of several inflammatory cytokines and chemical mediators which are known to be related to inflammation were measured in mouse lung fibroblast cells(mLFCs) and RAW264.7 cells. Results: Prior to the experiment. we investigated the security of SYTG by measuring GOT and GPT in serum. 1. SYTG showed high antioxidant activity in a concentration-dependent degree by measured scavenging activity of DPPH free radical, superoxide dismutase and superoxide anion radical. 2. SYTG inhibited IL-1$\beta$, IL-6. TNF-$\alpha$, COX-2 and NOS-II mRNA expression as compared with the control group in a concentration-dependent degree in RAW264.7 cell line. 3. SYTG inhibited IL-1$\beta$, IL-6 production significantly at 100 ${\mu}g/ml$ and TNF-$\alpha$ production significantly at 50, 100 ${\mu}g/ml$ as compared with the control group in RA W264.7 cell line. 4. SYTG inhibited IL-1$\beta$, and IL-6 production significantly as compared with the control group in serum of acute inflammation-induced mice. and decreased IL-1$\beta$, IL-6 production in spleen tissue. and also decreased IL-1$\beta$, IL-6 production in liver tissue. Conclusion: These results suggest that SYTG can be useful in treating diverse female diseases caused by inflammation such as endometrosis, myoma, pelvic congestion. chronic cervicitis, chronic pelvic inflammatory disease and so on.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.22-30
• /
• 2021

Objectives: The objectives of this study were to develop a quality control protocol of inorganic acids using ion chromatograph and to evaluate analytical proficiency of the legally designated agencies. Methods: This study prepared inorganic acid samples by injecting three anion certified solutions (chloride, nitrate, and sulfate) on the quartz filters. To investigate the storage stability and concentration consistency of the samples, 240 samples for each anion were tested at weeks 0, 2, 4, 8, 12, and 16 while storing at 4℃ and 25℃. To evaluate analytical proficiency, two separate testings were administrated for six skilled analysts and 46 analysts affiliated with legally designated agencies. Results: Average recoveries of the three ions after 16 weeks of storage were fairly high (over 95%). In addition, average recoveries (chloride = 97%, nitrate = 96%, and sulfate = 103%) after 16 weeks of storage at low temperate were relatively higher than those (94%, 93%, and 98%) at room temperature. The coefficients of variation (CV) for the three ions were less than 5% except for the sulfate sample at 5.56 ㎍ (CV = 12.4%). The average ratios of the concentration values analyzed by the legally designated agencies to the injected concentrations were close to 1. However, their CVs were relatively greater (chloride ≤ 49%, nitrate ≤ 14%, and sulfate ≤ 28%), which implies a need for quality control. Conclusions: The quality control protocol used in this study for the three inorganic acids can be utilized in the quality control for ion chromatography.