• 대한원격탐사학회지
• /
• 제26권6호
• /
• pp.653-664
• /
• 2010

The land surface reflectance is a key parameter influencing the climate near the surface. Therefore, it must be determined with sufficient accuracy for climate change research. In particular, the characteristics of the bidirectional reflectance distribution function (BRDF) when using earth observation system (EOS) are important for normalizing the reflected solar radiation from the earth's surface. Also, wide swath satellites like SPOT/VGT (VEGETATION) permit sufficient angular sampling, but high resolution satellites are impossible to obtain sufficient angular sampling over a pixel during short period because of their narrow swath scanning. This gives a difficulty to BRDF model based reflectance normalization of high resolution satellites. The principal objective of the study is to add BRDF modeling of high resolution satellites and to supply insufficient angular sampling through identifying BRDF components from SPOT/VGT. This study is performed as the preliminary data for apply to high-resolution satellite. The study provides surface parameters by eliminating BRD effect when calculated biophysical index of plant by BRDF model. We use semi-empirical BRDF model to identify the BRD components. This study uses SPOT/VGT satellite data acquired in the S1 (daily) data. Modeled reflectance values show a good agreement with measured reflectance values from SPOT satellite. This study analyzes BRD effect components by using the NDVI(Normalized Difference Vegetation Index) and the angle components such as solar zenith angle, satellite zenith angle and relative azimuth angle. Geometric scattering kernel mainly depends on the azimuth angle variation and volumetric scattering kernel is less dependent on the azimuth angle variation. Also, forest from land cover shows the wider distribution of value than cropland, overall tendency is similar. Forest shows relatively larger value of geometric term ($K_1{\cdot}f_1$) than cropland, When performed comparison between cropland and forest. Angle and NDVI value are closely related.

• 한국지리정보학회지
• /
• 제26권4호
• /
• pp.200-217
• /
• 2023

본 연구는 부산의 도시공간 네트워크를 시계열적으로 분석하여 중심지 변화 및 공간관리의 계획적 역할을 살펴보는 것이 목적이다. 분석 방법은 공간구문론의 ASA(Angular Segment analysis) 기법을 사용하였고 분석 기간은 부산시가지계획이 수립된 1937년부터 2022년까지 세 시기로 구분하여 살펴보았다. 그 결과 남포동, 광복동 지역에서 형성된 중심지가 분화하여 서면으로 이동하였고, 이후 서면에서 연산으로 재분화하는 과정을 확인하였다. 아울러 향후 중심지가 서부권으로 이동할 여지가 있고 정책적으로 설정된 중심지 및 어메니티적 요소로 형성되는 중심지를 파악할 수 있었다. 또한 공간구문론의 명료도 분석을 통해 도시공간구조의 체계성을 검토한 결과, 기존 연구들에서 정성적으로 해석한 것과 공간구문론 관점에서 해석한 것이 서로 일치하였다. 이를 통해 공간관리를 위한 계획의 역할을 확인할 수 있었다.

• 전자공학회논문지D
• /
• 제35D권9호
• /
• pp.70-76
• /
• 1998

본 논문에서는 LCB 공간광변조기의 화소를 전자적으로 제어함으로써 LCD에서 빛을 통과시키는 창을 만들고, 이러한 창을 전자적으로 상하 좌우로 이동시킴으로써 홀로그램을 고밀도로 각다중화할 수 있는 방법을 제시하였다. “10×10”의 화소를 창의 기본크기로 사용할 경우 1,536개의 어드레스를 만들 수 있고, “2×2”의 화소를 창의 기본크기로 사용하여 총 38,400개의 어드레스를 만들 수 있다. 본 논문에서 제안된 방법의 유효성을 입증하기 위해, 30개의 어드레스를 이용하여 영상을 기록하고 복원하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.837-840
• /
• 1998

In this paper, we designed the computer input device for rehabilitation of people with hand disabilities. This input device is made up of two Gyrostar sensors attached in the orthnormal directions of x, y axes. Gyrostar is a sensor for angular Acceleration. This device is attached by the user's head side. Head movement is detected by analysing and processing the output wave signals from the sensors therefore enabling the user to move the mouse pointer that helps to operate the computer. This method does not necessitate a complex hardware or a long installation process, which was formerly the case, and uses real time algorithms which enables simple emulation of a computer mouse. The interface of this device and the mouse are the same.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 춘계학술대회
• /
• pp.32-34
• /
• 1994

An automatic multiframe procedure for tracking signalized points on multiple, differently moving discontinuous surface is described. The position of markers which attached on human body give us some important information such as velocity, acceleration, angular velocity and angular acceleration, etc, of the rigid objects. Generally, the detected objects occufying some area in images rather than a point because of the generic size of the marks or the smeared effects of the camera. To solve the problem we used a modified clustering algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2006-2009
• /
• 2005

This paper presents a method for registering images using phase correlation technique in fourier domain, hough transform and multi-resolution wavelet. To register images, source and input images are transformed to wavelet domain. An angular transition can be obtained by applying hough transform technique followed by phase correlation. Then we apply phase correlation technique to find x-axis and y-axis transition. We apply wavelet transform to reduce processing time and also use its coefficients as edge information instead of canny detector. With multi-resolution property of wavelet transform, registration time can be greatly reduced. After we get all transition parameters, we transform the input images according to these parameters. Then, we compose and blend all images into a new large image with details of all source images. From our experiment, we can find the accurate transition both x-y translation and angular transition with less error.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.235-238
• /
• 1998

This paper presents the detection of internal combustion engine's multiple misfire. The primary cause of air pollution by vehicles is imperfect conbustion of fuel. The CARB(California Air Resources Board) have imposed regulations for the detection of misfiring in automotive engines. The OBD-II regulations requir that misfire should be monitored by the diagnostic system, and that the goal of OBD-II is to alert the driver to the presence of a malfunction of the emission control system. Present invention based upon measurements of engine roughness as derived from crankshaft angular velocity measurements with special signal processing method. Crankshaft angular velocity signals are processed by walsh-fourier transform. Experimental work confims that it's possible to apply walsh-fourier transform for the detection of multiple misfires in no-load idle and road testing.

• ETRI Journal
• /
• 제38권3호
• /
• pp.502-509
• /
• 2016

Feature detection and description are key ingredients of common image processing and computer vision applications. Most existing algorithms focus on robust feature matching under challenging conditions, such as inplane rotations and scale changes. Consequently, they usually fail when the scene is blurred by camera shake or an object's motion. To solve this problem, we propose a new feature description algorithm that is robust to image blur and significantly improves the feature matching performance. The proposed algorithm builds a feature descriptor by considering the integral projection along four angular directions ($0^{\circ}$, $45^{\circ}$, $90^{\circ}$, and $135^{\circ}$) and by combining four projection vectors into a single highdimensional vector. Intensive experiment shows that the proposed descriptor outperforms existing descriptors for different types of blur caused by linear motion, nonlinear motion, and defocus. Furthermore, the proposed descriptor is robust to intensity changes and image rotation.

• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.294-304
• /
• 2012

This paper proposes a fuzzy speed tracking controller and a fuzzy rotor angular acceleration observer for a surface-mounted permanent magnet synchronous motor (SPMSM) based on the Takagi-Sugeno (T-S) fuzzy model. The proposed observer-based controller is robust to load torque variations since it utilizes rotor angular acceleration information instead of the load torque value. Linear matrix inequality (LMI) sufficient conditions are given to compute the gain matrices of the speed tracking controller and the observer. In addition, it is mathematically verified that the proposed observer-based control system is asymptotically stable. Simulation and experimental results are presented to confirm that the proposed control algorithm assures a better transient behavior and less sensitivity under model parameter variations than the conventional PI control method.

• 전자공학회논문지D
• /
• 제35D권12호
• /
• pp.92-98
• /
• 1998

본 논문에서는 기준빔의 입사각을 AOD(acoustic-optic device)를 사용하여 전자적으로 제어함으로써 정확한 어드레스와 빠른 엑세스 시간(10㎲)을 갖는 각다중화 고밀도 체적 홀로그래픽 메모리 시스템을 구현하였다. 물체빔의 주파수 보상이 불필요한 AOD 각다중화 메모리 시스템을 설계하고, AOD의 편향각을 렌즈조합으로 확장하여 저장용량을 6배 증가시켜 1㎤의 Fe:LiNbO₃ 광굴절 매질에 51개의 이미지를 저장하는 실험을 수행하였다.