• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.537-549
• /
• 1998

The purpose of this study was to evaluate the influence of root resection and retrograde cavity preparation methods on the apical leakage in endodontic surgery. To investigate the effect of various root resection and retrograde cavity preparation methods on the apical leakage, 71 roots of extracted human maxillary anterior teeth and 44 mesiobuccal roots of extracted human maxillary first molars were used. Root canals of the all the specimens were prepared with step-back technique and filled with gutta-percha by lateral condensation method. Three millimeters of each root was resected at a 45 degree angle or perpendicular to the long axis of the tooth according to the groups. Retrograde cavities were prepared with ultrasonic instruments or a slow-speed round bur, and occlusal access cavities were filled with zinc oxide eugenol cement. Three coats of clear nail polish were placed on the lateral and coronal surfaces of the specimens except the apical cut one millimeter. All the specimens were immerged in 2% methylene blue solution for 7 days in an incubator at $37^{\circ}C$. The teeth were dissolved in 14 ml of 35% nitric acid solution and the dye present within the root canal system was returned to solution. The leakage of dye was quantitatively measured via spectrophotometric method. The obtained data were analysed statistically using two-way ANOVA and Duncans Multiple Range Test. The results were as follows: 1. No statistically significant difference was observed between ultrasonic retrograde cavity preparation method and slow-speed round bur technique, without apical bevel (p>0.05). 2. Ultrasonic retrograde preparation method showed significantly less apical leakage than slow-speed round bur technique, with bevel (p<0.0001). 3. No statistically significant difference was found between beveled resected root surface and non-beveled resected root surface, with ultrasonic technique (p>0.05). 4. Non-beveled resected root surface showed significantly less apical leakage than beveled resected root surface, with slow-speed round bur technique (p<0.0001). 5. No statistically significant difference in apical leakage was found between the group of retrograde cavity prepared parallel to the long axis of the tooth and the group of one prepared perpendicular to the long axis of the tooth (p>0.05). 6. Regarding isthmus preparation, ultrasonic retrograde preparation method showed significantly less apical leakage than slow-speed round bur technique, in the mesiobuccal root of maxillary molar, without bevel (p<0.0001).

• Journal of Animal Science and Technology
• /
• v.51 no.4
• /
• pp.329-336
• /
• 2009

The objective of this study was to investigate the relationship between measurements of color and water-holding capacity (WHC) in pork loin. A total of 419 pork loins were sampled from crossbred (Landrace$\times$Jeju native black pig) F2 pigs at a commercial slaughter house. Meat color measurements (CIE $L^*$, $a^*$, $b^*$), chroma ($C^*$) and hue angle (h) were measured with the Minolta Chromameter and WHC was measured by filter paper fluid, drip loss and cooking loss. Also pH, moisture content and crude fat content were measured at 24 hr postmortem. CIE $L^*$, $b^*$ and h values had positive correlation with drip loss (r=0.52, 0.42), but CIE $a^*$ and $C^*$ values were not related to drip loss. Results showed that CIE $L^*$, $b^*$, and h color system was better than CIE $L^*$, $a^*$, $b^*$ color system to predict WHC, especially drip loss. pH was negatively correlated to drip loss (-0.42) and CIE $L^*$ (-0.67). Although CIE $L^*$ and pH were correlated to drip loss, the accuracy of their estimates for drip loss was 27% and 17%, respectively. Consequently, it was confirmed that meat color and WHC were not perfectly related and suggested that CIE $L^*$, $b^*$, and h color space should not be used independently to predict WHC of pork loin.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.2 no.2
• /
• pp.47-61
• /
• 2000

Agroclimatic zoning was done for paddy rice culture in North Korea based on a simulation experiment. Daily weather data for the experiment were generated by 3 steps consisting of spatial interpolation based on topoclimatological relationships, zonal summarization of grid cell values, and conversion of monthly climate data to daily weather data. Regression models for monthly climatological temperature estimation were derived from a statistical procedure using monthly averages of 51 standard weather stations in South and North Korea (1981-1994) and their spatial variables such as latitude, altitude, distance from the coast, sloping angle, and aspect-dependent field of view (openness). Selected models (0.4 to 1.6$^{\circ}C$ RMSE) were applied to the generation of monthly temperature surface over the entire North Korean territory on 1 km$\times$l km grid spacing. Monthly precipitation data were prepared by a procedure described in Yun (2000). Solar radiation data for 27 North Korean stations were reproduced by applying a relationship found in South Korea ([Solar Radiation, MJ m$^{-2}$ day$^{-1}$ ] =0.344 + 0.4756 [Extraterrestrial Solar Irradiance) + 0.0299 [Openness toward south, 0 - 255) - 1.307 [Cloud amount, 0 - 10) - 0.01 [Relative humidity, %), $r^2$=0.92, RMSE = 0.95 ). Monthly solar irradiance data of 27 points calculated from the reproduced data set were converted to 1 km$\times$1 km grid data by inverse distance weighted interpolation. The grid cell values of monthly temperature, solar radiation, and precipitation were summed up to represent corresponding county, which will serve as a land unit for the growth simulation. Finally, we randomly generated daily maximum and minimum temperature, solar irradiance and precipitation data for 30 years from the monthly climatic data for each county based on a statistical method suggested by Pickering et a1. (1994). CERES-rice, a rice growth simulation model, was tuned to accommodate agronomic characteristics of major North Korean cultivars based on observed phenological and yield data at two sites in South Korea during 1995~1998. Daily weather data were fed into the model to simulate the crop status at 183 counties in North Korea for 30 years. Results were analyzed with respect to spatial and temporal variation in yield and maturity, and used to score the suitability of the county for paddy rice culture.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.1
• /
• pp.61-73
• /
• 2018

The objective of this study was to investigate the suitable method for rapid establishment of grassland according to forage species, mixed pastures and installation of mesh at 35 degree angle of cutting area in the middle region of Korea. In agronomic characteristics after wintering, vegetation coverage of Tall fescue(TF) was 74% in monoculture, which was the highest among 3 forage crops. Meanwhile average vegetation coverages of monoculture and mixed pasture were 67 and 92% in treated of mesh, which were 4 and 18% higher than untreated of mesh, respectively. In botanical composition, TF of monoculture and Orchardgrass(OG) and TF oriented mixed were indicated over 94% forage coverage. Meanwhile forage coverages Kentucky bluegrass(KBG) and Red top(RT) of monoculture and Perennial ryegrass(PRG) oriented mixture were 89, 81 and 92% in treated of mesh, which were 7, 6 and 5% higher than untreated of mesh, respectively. In forage productivity, dry matter yield(DMY) of TF(12,537kg/ha) and KBG(11,897kg/ha) of monoculture were significant(p<0.05) higher than RT(9,604kg/ha). Meanwhile DMY of OG(12,227kg/ha), TF(12,823kg/ha) and PRG(11,871kg/ha) oriented mixed were not significant difference(p>0.05). In forage quality of monoculture, in the first year, crude protein of KBG was 13.6%, which was the highest among 3 forage species. Also neutral detergent fiber(NDF) of TF was 56.5%, which was the lowest among 3 forage species. In mixed pasture, in the second year, NDF and acid detergent fiber of PRG oriented mixed were 56.5 and 34.3%, respectively, which was the lowest among 3 mixed pasture. In conclusion, forage species TF was more suitable on initial rootage and continuous forage coverage, OG and TF oriented mixed were more suitable on continuous forage coverage. Also the installation of mesh showed positive effects on initial rootage and maintain forage ratio.

• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.520-527
• /
• 1988

The crystal structures of $Co^{2+}\;and\;Ag^+\;exchanged\;zeolite\; A,\; Ag_6Co_3$-A(a = 12.131(5)$\AA$) and $Ag_3Co_{4.5}$-A(a = 12.145(1)$\AA$), have been determined by single crystal X-ray diffraction techniques. Both structures were solved and refined in the cubic space group Pm3m at 21(1)$^{\circ}C$. Full-matrix leastsquares refinement converged to the final error indices of R1 = 0.045 and R2 = 0.041 for $Ag_3Co_{4.5}-A,\; and\; R1 = 0.066\; and\; R2 = 0.076\; for\; Ag_6Co_3$-A using the 258 and 189 reflections, respectively, for which I > 3$\sigma$(I). Both structures indicate that CO(Ⅱ)ions are coordinated by three framework oxygens; the Co(II) to O(3) distances are 2.118(4)$\AA$ for $Ag_3Co_{4.5}$-A and 2.106(1)$\AA$ for $Ag_6Co_3-A$, respectively. In each structure, the angle substended at Co(II), O(3)-Co(II)-O(3) is ca 120°, close to the idealized trigonalplanar value. $Co^{2+}$ ions prefer to 6-ring sites and $Ag^+$ ions prefer to 8-ring site when total number of cations is more than 8. The crystals of hydrated and dehydrated $Ag_{12-2x}Co_x-A (x > 4.5)$ had no crystalline diffraction pattern, indicating the apparent exchange limit of $Co^{2+}\; into\; Ag_{12}-A\; is\; 4.5 Co^{2+}$ ions per unit cell. $Co^{2+}$ ions hydrolyze $H_2O$ molecules and $H_3O^+$ concentraction is accumulating. These $H_3O^+$ ions destroy the zeolite structures.

• Solar Energy
• /
• v.20 no.2
• /
• pp.43-54
• /
• 2000

We prepared and characterized $Cu(In_{1-x}Ga_x)Se_2$(CIGS) films using a elemental co-evaporation method for absorbing layer of high efficiency thin film solar cells. The CIGS films deposited on a soda-lime glass exhibited low resistivity because of higher carrier concentration. Na was accumulated at the CIGS surface and the 0 and Se were also accumulated at the surface, suggesting that oxidation is a driving force of Na accumulation. The structure of CIGS film was modified or a secondary phase was formed in the Cu-poor CIGS bulk films probably due to the incorporation of Na into Cu vacancy sites. As the Ga/(In+Ga) ratio increased, the diffraction peaks of $Cu(In_{1-x}Ga_x)Se_2$ films were shifted to larger angle and splitted, and the grain size of $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films became smaller. All $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films showed the p-type conductivity regardless of the Ga/(In+Ga) ratio. Ag/n-ZnO/i-ZnO/CdS/$Cu_{0.91}(In_{0.7}Ga_{0.3})Se_2$/Mo solar cells were fabricated. The currently best efficiency in this study was 14.48% for $0.18cm^2$ area ($V_{oc}=581.5mV,\;J_{sc}=34.88mA$, F.F=0.714).

• The Journal of the Petrological Society of Korea
• /
• v.13 no.4
• /
• pp.179-190
• /
• 2004

Precambrian metamorphic rocks of Yeongyang-Uljin area, which is located in the eastern part of Sobaegsan Massif, Korea, are composed of Pyeonghae, Giseong, Wonnam Formations and Hada leuco granite gneisses. These show a zonal distribution of WNW-ESE trend, and are intruded by Mesozoic igneous rocks and are unconformably overlain by Mesozoic sedimentary rocks. This study clarifies the deformation history of Precambrian metamorphic rocks after the formation of gneissosity or schistosity on the basis of the geometric and kinematic features and the forming sequence of multi-deformed rock structures, and suggests that the geological structures of this area experienced at least four phases of deformation i.e. ductile shear deformation, one deformation before that, at least two deformations after that. (1) The first phase of deformation formed regional foliations and WNW-trending isoclinal folds with subhorizontal axes and steep axial planes dipping to the north. (2) The second phase of deformation occurred by dextral ductile shear deformation of top-to-the east movement, forming stretching lineations of E-W trend, S-C mylonitic structure foliations, and Z-shaped asymmetric folds. (3) The third phase deformation formed I-W trending open- or kink-type recumbent folds with subhorizontal axes and gently dipping axial planes. (4) The fourth phase deformation took place under compression of NNW-SSE direction, forming ENE-WSW trending symmetric open upright folds and asymmetric conjugate kink folds with subhorizontal axes, and conjugate faults thrusting to the both NNW and SSE with drag folds related to it. These four phases of deformation are closely connected with the orientation of regional foliation in the Yeongyang-Uljin area. 1st deformation produced regional foliation striking WNW and steeply dipping to the north, 2nd deformation locally change the strike of regional foliation into N-S direction, and 3rd and 4th deformations locally change dip-angle and dip-direction of regional foliation.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.240-251
• /
• 2008

Objective: The purpose of this study was to evaluate the effect of head position changes on the root parallelism between adjacent teeth on panoramic radiographs. Methods: A model with normal occlusion was constructed in the SolidWorks program, then RP (rapid protyping) model was fabricated. The model was repeatedly imaged and repositioned five times at each of the following nine positions: ideal head position, $5^{\circ}$ up, $10^{\circ}$ up, $5^{\circ}$ down, $10^{\circ}$ down, $5^{\circ}$, right, $10^{\circ}$, up, and $5^{\circ}$ right rotation, $10^{\circ}$ right rotation. Panoramic radiographs were taken by Planmeca ProMax and the angle between the long axes of adjacent teeth was directly measured in the monitor. Results: Axes of adjacent teeth tended to converge toward the occlusal plane when the head tilted up and converged in the opposite direction to the occlusal plane when the head tilted down. Anterior teeth showed the most notable differences. When one side of the head tilted up $5^{\circ}$ and $10^{\circ}$ along the anteroposterior axis (Y axis), tooth axes of the same side tended to converge toward the occlusal plane and tooth axes of the opposite side tended to converge in the opposite direction to the occlusal plane. When the head rotated to one side along the vertical axis (Z axis), the canine and lateral incisor of the same side converged in the opposite direction to the occlusal plane and the canine and lateral incisor of the other side converged toward the occlusal plane. Conclusions: When assessing the root parallelism on panoramic radiographs, the occlusal plane cant (anteroposterior or lateral) or asymmetry of the dental arch should be considered because these can cause distortion of tooth axes on panoramic radiographs.

• Journal of dental hygiene science
• /
• v.4 no.3
• /
• pp.133-140
• /
• 2004

It examines closely the occupation characteristic primary factor which the dentistry hygienic company field which is working to presence at a sickbed is undergoing the degree and from the research which it sees and it grasps the adaptation method against it gropes bitterly with development of the dentistry hygienic company individual to join in, it contributed in dentistry medical treatment service quality improvement and the research which tries to sleep it attempted. Currently the dentistry hygiene which works from Seoul and the condition area subject matter dentist unit, the dentistry hospital and the general hospital dentistry back it did in the object which it will burn. 116 issues which become frequency in question 120 it used SPSS 10.0 and it analyzed. Result of this study is as following. (1) Was expose that stress degree by factor feels about commonness on the whole, and angle prospects and support connection stress at company were the biggest item by item, and appeared as on the other hand relation connection stress with patient is the smallest. (2) Stress that stress degree by each receives in case of there are a lot of other businesses to characteristic businesses except appeared highest. On the other hand, was expose that feel the lowest stress degree an item that other a type of occupation and discord are. (3) 'Do action of that throw goods or closes the door bump' appeared article highest by short term adaptation method about stress, and 'Think and gives up by fate' appeared highest by special skill adaptation method. Short term adaptation method appeared high than special skill adaptation method on the whole but the difference appeared as is very small. (4) Stress degree comparison by general special quality was shown difference that stress by only dental hygiene administration of justice selection motive keeps in mind. (5) All of the result that compare short term, long term adaptation method about stress that feel new dental higienist apple career dental higienist same difference be, but displayed high result in same munhang. (6) Was expose that difference that keep in mind from all arguments in comparison of short term adaptation method by general special quality does not exist, on the other hand, comparison of long-term adaptation method displayed result that religion among only variable keeps in mind statistically.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.73-80
• /
• 2022

In this study, details of NRC beam-column connections were developed in which beam and columns pre-assembled in factories using steel angles were bolted on site. The developed joint details are NRC-J type and NRC-JD type. NRC-J type is a method of tensile joining with TS bolts to the side and lower surfaces of the side plate of the NRC column and the end plate of the NRC beam. NRC-JD type has a rigid joint with high-strength bolts between the NRC beam and the side of the NRC column for shear, and with lap splices of reinforcing bar penetrating the joint and the beam main reinforcement for bending. For the seismic performance evaluation of the joint, three specimens were tested: an NRC-J specimen and NRC-JD specimen with NRC beam-column joint details, and an RC-J specimen with RC beam-column joint detail. As a result of the repeated lateral load test, the final failure mode of all specimens was the bending fracture of the beam at the beam-column interface. Compared to the RC-J specimen, the maximum strength of the specimen by the positive force was 10.1% and 29.6% higher in the NRC-J specimen and the NRC-JD specimen, respectively. Both NRC joint details were evaluated to secure ductility of 0.03 rad or more, the minimum total inter-story displacement angle required for the composite intermediate moment frame according to the KDS standard (KDS 41 31 00). At the slope by relative storey displacemet of 5.7%, the NRC-J specimen and the NRC-JD specimen had about 34.8% and 61.1% greater cumulative energy dissipation capacity than the RC specimen. The experimental strength of the NRC beam-column connection was evaluated to be 30% to 53% greater than the theoretical strength according to the KDS standard formula, and the standard formula evaluated the joint performance as a safety side.