• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.230-235
• /
• 2017

When the characteristics of a linear induction motor (LIM) are analyzed using finite element analysis (FEA), it is desirable to set the voltage source as an input. If the voltage source is set as an input in FEA, the leakage inductance and primary resistance of the equivalent circuit must be entered by direct calculation, and the magnetizing inductance and secondary reaction effects are directly considered in FEA. Exact calculation is necessary because the primary winding resistance and leakage inductance directly entered will have a significant effect on the LIM output. Therefore, in this study, we accurately calculated the primary leakage inductance and analyzed the resulting LIM characteristics. We calculated the leakage inductance using an analytical equation and FEA, and we confirmed the accuracy by comparing the results with the value experimentally calculated using a manufactured model. We also analyzed the instrument performance and thrust of the LIM as a function of the difference in the leakage inductance. Finally, we present the conclusions on the precise analysis based on the calculation of the leakage inductance.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.1910-1915
• /
• 2008

The load analysis for the distribution system and facilities has relied on measurement equipment. Moreover, load monitoring incurs huge costs in terms of installation and maintenance. This paper presents a new model to analyze wherein facilities load under a feeder every 15 minutes using meter reading data that can be obtained from a power consumer every 15 minute or a month even without setting up any measuring equipment. After the data warehouse is constructed by interfacing the legacy system required for the load calculation, the relationship between the distribution system and the power consumer is established. Once the load pattern is forecasted by applying clustering and classification algorithm of temporal data mining techniques for the power customer who is not involved in Automatic Meter Reading(AMR), a single-line diagram per feeder is created, and power flow calculation is executed. The calculation result is analyzed using various temporal and spatial analysis methods such as Internet Geographic Information System(GIS), single-line diagram, and Online Analytical Processing (OLAP).

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.590-593
• /
• 2012

매설강관에 대한 전파상수는 대지도전율에 의한 매질 영향을 받기 때문에 대기중에서의 해석과 같지 않고 복잡한 초월식을 풀어야 하는 어려움이 있다. 이러한 매설관에 대한 전파상수 해석에 관하여는 Wait의 논문에서 연구되어 있고 이것을 근간으로 일본과 미국에서 각각 전송선 이론에 의한 초월식을 실용적으로 수립하여 제시하고 있다. 본 논문에서는 매설 강관에 대한 몇 가지 다른 형태의 전파상수 계산식에 대하여 시뮬레이션을 통한 값을 다루어 보고 유도전압에 대하여 적절한 산출 적용이 되는 지 검토하여 본 바 정학한 계의 해석에 의한 것과 Wait 근간의 일본 방식에 의한 계산값이 유사한 것으로 도출되었다.

• Steel and Composite Structures
• /
• 제17권2호
• /
• pp.173-184
• /
• 2014

This study aimed to theoretical calculate the thermal residual stress in continuous SiC fiber reinforced titanium matrix composites. The analytical solution of residual stress field distribution was obtained by using coaxial cylinder model, and the numerical solution was obtained by using finite element model (FEM). Both of the above models were compared and the thermal residual stress was analyzed in the axial, hoop, radial direction. The results indicated that both the two models were feasible to theoretical calculate the thermal residual stress in continuous SiC fiber reinforced titanium matrix composites, because the deviations between the theoretical calculation results and the test results were less than 8%. In the titanium matrix composites, along with the increment of the SiC fiber volume fraction, the longitudinal property was improved, while the equivalent residual stress was not significantly changed, keeping the intensity around 600 MPa. There was a pronounced reduction of the radial residual stress in the titanium matrix composites when there was carbon coating on the surface of the SiC fiber, because carbon coating could effectively reduce the coefficient of thermal expansion mismatch between the fiber and the titanium matrix, meanwhile, the consumption of carbon coating could protect SiC fibers effectively, so as to ensure the high-performance of the composites. The support of design and optimization of composites was provided though theoretical calculation and analysis of residual stress.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.1097-1108
• /
• 2017

Accurate calculation of the conduction and switching losses of a power electronic converter is required to achieve the efficiency of the converter. Such calculation is also useful for computing the junction temperature of the switches. A few models have been developed in the articles for calculating the switching energy losses during switching transitions for the given values of switched voltage and switched current. In this study, these models are comprehensively reviewed and investigated for the first time for ease of comparison among them. These models are used for calculating the average amount of switching power losses. However, some points and details should be considered in utilizing these models when switched current or switched voltage presents time-variant and alternative quantity. Therefore, an applicable technique is proposed in details to use these models under the above-mentioned conditions. A proper switching loss model and the presented technique are used to establish a new and fast method for obtaining the average switching power losses in any type of power electronic converters. The accuracy of the proposed method is evaluated by comprehensive simulation studies and experimental results.

• 화약ㆍ발파
• /
• 제36권3호
• /
• pp.10-18
• /
• 2018

동적 하중을 받는 암반의 역학적 거동은, 같은 크기의 최대 하중이라도 정적으로 가해지는 경우와는 다른 특성을 보인다. 동적 하중 하에서의 거동 특성을 규명하기 위한 실험적 접근 방법은 동적 하중의 제어와 계측 및 해석에 있어서 정적 조건에서의 실험 방법보다 더 많은 어려움이 있다. 수치해석적 방법은 물리적 실험이 아니라 수치해석적으로 실험을 실시함으로써 물리적 제약을 덜 받으므로 설계 단계에서 매우 유력한 해석 도구가 될 수 있다. 그러나 수치해석방법은 해석방법의 알고리즘이 적정하더라도, 입력 자료와 경계조건의 설정에 따라 계산 결과가 많이 달라질 수 있으므로 해석 시 세심한 주의가 필요하다. 본 논문에서는 동적 하중을 받는 암반 구조물의 거동을 수치해석적으로 검토할 때, 경계 조건, 동적 하중과 계산 시간 간격, 동적 하중 특성이 계산 결과에 미치는 영향을 검토하여, 동적 해석 시 경계조건과 계산 시간 간격의 설정 지침을 제공하고자 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.616-618
• /
• 2002

A Superconducting Rotary Machine (SRM) is characterized by an air-cored machine with its rotor iron and stator iron teeth removed. For this reason, the SRM is featured by 3D magnetic flux distribution, which decreases in the direction of axis, Therefore, 3D magnetic field analysis method is required to know about characteristic of magnetic field distribution of SRM, In this paper, 3D flux distribution of SRM is calculation by using analytical method. The magnetic field distribution due to the field coils use of the Biot-Savart equation. The magnetic core is represented by magnetic surface polarities. The paper describes the combined use of above methods for the total computation, and compares analytical method and 3D FEM(Finite Element Method) results.

• 대한조선학회지
• /
• 제9권1호
• /
• pp.1-6
• /
• 1972

To contribute towards more accurate estimation of the virtual coefficient for the vertical vibration of the chine-type ship, experimentally obtained three-dimensional correction factors, J, of added mass of prismatic beams having cross section shape of hypotrocoid characters, slightly concaved Lewis form and elliptic form are investigated in connection with the applicability of an approximate analytical calculation method compared to that proposed by T. Kumai[6] for the Lewis form cylinders, and synthetically in compared with the experimental works on various cross section shapes of the other type by L.C. Burril et al[8] and the analytical works on the ellipsoid of revolution by F.M. Lewis[1] and J.L. Taylor[2]. The experimental results show that the aforementioned analytical method gives, unlike that for the Lewis form cylinders, considerably larger J-values for the chine-type cylinders, and that the influence of the character of the cross section shape on J-values is not remarkable in practical sense. Finally, considering in synthesis the experimental results on prismatic beams, the Burril's works on palabolic plan form and elliptic plan form, and that the chine-type ship usually has a hull form of transom stern, it is fairly safe to say, at the present stage, that adoptation of the Taylor's J-values will not results in any large error in estimation of the virtual inertia coefficients of the chine-type ships.

• Geomechanics and Engineering
• /
• 제22권1호
• /
• pp.11-23
• /
• 2020

In this study, a new analytical-numerical procedure is developed to give the stresses and strains around a circular tunnel in rock masses exhibiting different stress-strain behavior. The calculation starts from the tunnel wall and continues toward the unknown elastic-plastic boundary by a finite difference method in the annular discretized plastic zone. From the known stresses in the tunnel boundary, the strains are calculated using the elastic-plastic stiffness matrix in which three dimensional Hoek-Brown failure criterion (Jiang and Zhao 2015) and Mohr-Coulomb potential function with proper dilation angle (i.e., non-associated flow rule) are employed in terms of stress invariants. The illustrative examples give ground response curve and show correctness of the proposed approach. Finally, from the results of a great number of analyses, a simple relationship is presented to find out the closure of circular tunnel in terms of rock mass strength and tunnel depth. It can be valuable for the preliminary decision of tunnel support and for prediction of tunnel problems.

• 대한기계학회논문집A
• /
• 제38권5호
• /
• pp.545-550
• /
• 2014

본 연구는 복잡한 빔 구조체의 마찰에 의한 소음을 유한요소기법을 이용하여 예측하였다. 마찰접촉 모델을 수학적으로 유도하여 유한요소기법에 접목하였다. 그 결과 빔 구조체의 특정 모드에서 모드 연성에 의해서 동적 불안정성이 유발되고 있음을 보여주었다. 또한 마찰의 방향이 모드 불안정성에 매우 큰 영향을 미치고 있음을 보여주었다. 또한 실제 빔 구조체 시스템을 제작하여 해석에서 예측한 특정 주파수에서 소음 피크주파수가 발생하고 있음을 실험적으로 검증하였다.