• Korean Journal of Food Science and Technology
• /
• v.51 no.6
• /
• pp.517-523
• /
• 2019

In this study, we investigated antioxidant capacity of 20 strawberry extract using the DPPH and ABTS assay and HPLC-DAD validation method. The total polyphenolic and flavonoids contents of 20 strawberry extracts were 22.77-107.61 mg TAE/100 g FW and 17.58-44.12 mg QE/100 g FW. The Aiberry and Elie star showed the highest total polyphenol and flavonoid contents, respectively. The DPPH radical scavenging activity of what was 1540.6-1124.0 μmol TEAC/100 g FW and Derunoka showed the highest activity. The ABTS radical scavenging activity was 6352.3-4592.3 μmol TEAC/100 g FW and FA23 showed the highest activity. The HPLC-DAD method for the quantitation of ellagic acid results showed high linearity in various concentration ranges, and the limit of detection was 2.35 μg/mL. The limit of quantification was 7.12 μg/mL. Relative standard deviation values from intra-and inter-day precision were less than 5.31%. Recovery rate at 10, 50, and 100 μg/mL, respectively, were 100.0-101.0% with relative standard deviation (RSD) values less than 5.30%. These results provide viable information for the validation of antioxidant capacity in strawberry fruits.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.2
• /
• pp.104-116
• /
• 2018

BACKGROUND: This experiment was conducted to establish a simultaneous analysis method for 7 kinds of herbicides in 3 different classes having similar physicochemical property as diphenyl ether(bifenox and oxyfluorfen), dinitroaniline (ethalfluralin and trifluralin), and chloroacetamide (metolachlor, pretilachlor, and thenylchlor) in crops using GC-ECD/MS. METHODS AND RESULTS: All the 7 pesticide residues were extracted with acetone from representative samples of five raw products which comprised apple, green pepper, Kimchi cabbage, hulled rice and soybean. The extract was diluted with saline water and directly partitioned into n-hexane/dichloromethane(80/20, v/v) to remove polar co-extractives in the aqueous phase. For the hulled rice and soybean samples, n-hexane/acetonitrile partition was additionally employed to remove non-polar lipids. The extract was finally purified by optimized Florisil column chromatography. The analytes were separated and quantitated by GLC with ECD using a DB-1 capillary column. Accuracy and precision of the proposed method was validated by the recovery experiment on every crop samples fortified with bifenox, ethalfluralin, metolachlor, oxyfluorfen, pretilachlor, thenylchlor, and trifluralin at 3 concentration levels per crop in each triplication. CONCLUSION: Mean recoveries of the 7 pesticide residues ranged from 75.7 to 114.8% in five representative agricultural commodities. The coefficients of variation were all less than 10%, irrespective of sample types and fortification levels. Limit of quantitation (LOQ) of the analytes were 0.004 (etahlfluralin and trifluralin), 0.008 (metolachlor and pretilachlor), 0.006 (thenylchlor), 0.002 (oxyfluorfen), and 0.02 (bifenox) mg/kg as verified by the recovery experiment. A confirmatory technique using GC/MS with selected-ion monitoring was also provided to clearly identify the suspected residues. Therefore, this analytical method was reproducible and sensitive enough to determine the residues of bifenox, ethalfluralin, metolachlor, oxyfluorfen, pretilachlor, thenylchlor, and trifluralin in agricultural commodities.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.6
• /
• pp.429-433
• /
• 2003

trans-Resveratrol(3,5,4'-trihydroxystilbene) is phenolic compound present in grapes, wines, and peanuts, has been reported to have health benefits including anticarcinogenic effects, protection against cardiovascular diseases and reduced cancer risk. A simple method for the quantitative extraction of trans-resveratrol from peanut has been developed. Optimal conditions for extraction were investigated. Type of solvent, time, and temperature assayed influenced trans-resveratrol yield. Adequate extraction condition was decided to ethanol/water (80:20v/v) maintained at $25^{\circ}C$ for 45 min. After extraction, the protocol consists of sample preparation using a $\textrm{C}_{18}$ solid-phase extraction (SPE) cartridge after concentrate with rotary evaporator and quantified by reversed phase HPLC using a $\textrm{C}_{18}$ column at 308 nm. Analytical methods for measuring trans-resveratrol in peanut were adapted to isolate, identify, and quantify trans-resveratrol in 11 peanut varieties by HPLC (high-performance liquid chromatography) with UV detector, The 11 peanut varieties content ranged from 0.018 to 1.125 $\mu\textrm{g}/\textrm{g}$ with an average of 0.289 $\mu\textrm{g}/\textrm{g}$. The contents were higher in the seeds with than without testa, regardless of varieties. The trans-resveratrol content was Higher in 110, 130 days after sowing than that of other period.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.11
• /
• pp.105-117
• /
• 1972

This experiment has been made to study the relationship between several characters affecting the field lodging and to establish some useful standards for selection of lodging resistant varieties and to classify the degree of lodging resistance in wheat and barley varieties of different sources. The experiment was carried at the Crop Experiment Station, Suwon in 1968. The results obtained are summarized as followings. a. The lodging index modified with bending moment of culm at breaking seemed to be the most useful character in checking the lodging resistance. Highly significant positive correlation (Barley; r=0.40-0.67, Wheat; r=0.46-0.68) was obtained between the lodging index and actual field lodging. b. Between two essential components expressing bending stiffness of the culm, the bending moment at breaking and secondary moment of inertia, a highly significant positive correlation (Barley; r=0.59, wheat; r=0.46-0.53) was observed. c. The bending stiffness of culm got stronger as the dry weight per unit culm, which express the quantity of accumulated dry matters in culm, increased. The correlation coefficient between those two factors was 0.35 to 0.40 in barley and 0.33 to 0.76 in wheat respectively. d. In both wheat and barley, highly significant negative correlation between lodging index and the other factors such as dry weight per unit culm (Barley; r=-0. 51 to -0.70, Wheat; r=-0.65 to -0.83) and bending moment of culm at breaking (Barley; r=-0.29 to -0.69, Wheat: r=-0.54 to -0.89) were observed. Particulary, weight of culm at breaking, secondary moment of inertia and section modulus showed significant negative correlation with lodging index in wheat. e. Outside diameter of culm expressed more intimate relationship with physical characteristics of culm than inside diameter and also showed highly significant correlation with weight of culm at breaking (Barley; r=0.42-0.56, Wheat; r=0.39-0.44) and with bending moment of culm at breaking (Barley; r=0.40-0.41, Wheat; r=0.38-0.49) and with secondary moment of inertia (Barley; r=0.56-0.57, Wheat; r=0.28-0.98) and with section modulus (Wheat; r=0.22-0.96). Between the thickness of culm and physical characteristics of culm also showed the positive correlation. f. There was positive correlation between the culm length and actual field lodging in several groups of variety among the varieties tested. But the culm length seemed to undesirable as a selection measure for the selection of the lodging resistant variety considering the stiffness of culm. g. In classification of lodging resistance for the varieties tested, many Korean barley varieties expressed excellent lodging resistant than wheat, but most of the wheat and barley varieties from Japan considered quite resistant to lodging. h. In selection of lodging resistant varieties, lodging index lower than 1.67 in barley and 1. 76 in wheat considered highly resistant to actual field lodging.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.73-86
• /
• 2004

In order to estimate the post-ingestion bioavailability of heavy metals and to assess the risk of adverse health effects on human exposure to toxic heavy metals, environmental geochemical surveys were undertaken around the Dogok Au-Ag-Cu and the Hwacheon Au-Ag-Pb-Zn mine sites. Human risk assessment of toxic heavy metals was performed with the results of the SBET(simple bioavailability extraction test) analysis for soil and chemical analytical data for crop plant and water. Arsenic and other heavy metals were highly elevated in tailings from the Dogok(218 As mg/kg, 90.2 Cd mg/kg, 3,053 Cu mg/kg, 9,473 Pb mg/kg, 14,500 Zn mg/kg) and the Hwacheon(72 As mg/kg, 12.4 Cd mg/kg. 578 Pb mg/kg, 1,304 Zn mg/kg) mines. These significant concentrations can impact on soils and waters around the tailing dumps. The quantities of As, Cd and Zn extracted from paddy soils in the Hwacheon mine using the SBET analysis were 55.4%, 20.8% and 26.4% bioavailability, respectively, and for farmland soils in the Dogok mine, 40.8%, 37.6% and 33.0% bioavailability, respectively. From the results of human risk assessment, HI(Hazard Index) value exceeded 1.0 for As in the Hwacheon mine and for Cd in the Dogok mine. Thus, toxic risks for As and Cd exist via exposure(ingestion) of contaminated soil, water and rice grain in these mine sites. The cancer risk for As by the consumption of rice and groundwater in the Hwacheon mine area was 8E-4 and 1E-4, respectively. This risk level exceeds the acceptable risk(1 in 100,000) for regulatory purpose. Therefore, regular ingestion of locally grown rice and ground-water by the local population can pose a potential health threat due to long-term arsenic exposure.

• Food Science and Preservation
• /
• v.11 no.3
• /
• pp.394-399
• /
• 2004

The effects of gamma irradiation to improve the hygienic quality and microbiological shelf stability of whole baked egg were investigated by comparison with autoclaving process. The contamination levels of coliform, total aerobic bacteria and fungal group in a fresh egg were 10$^{5}$ CFU/g, 10$^{2}$ CFU/g and 10$^{1}$ CFU/g, respectively. After baking process, total aerobic bacteria and fungi were not exceeded to 10$^{1}$ CFU/g. Also, coliform was not detected under the aseptic process. However, cell counts of the baked egg after packaging reached to 10$^{4}$ CFU/g of total aerobic bacteria, 10$^{1}$ CFU/g of coliform, and 10$^{2}$ CFU/g of fungi. Therefore, it was assumed that microbial contamination of baked and packaged egg was mainly originated from an environmental uptake during packaging process. Microbiological shelf stability of the non sterilized control was about a week. Whereas, the baked eggs irradiated at more than 5 kGy were stable over 12 weeks at ambient condition as like those being autoclaved. Analytical texture profIle was stable within 10 kGy, but it became hardened in the sample treated with autoclaving. About 67$\%$ of panelists identified a sensory difference between non-irradiated and 10 kGy-irradiated sample. The baked egg irradiated at 10 kGy and autoclaved had lower acceptability than the control or samples irradiated lower than 5 kGy. Therefore, it was considered that optimal irradiation dose for radiation sterilization of baked and packaged egg was 5 kGy. At that point, it was recommended that appropriate microbiological shelf-life was 12 weeks at ambient condition.

• Applied Biological Chemistry
• /
• v.17 no.1
• /
• pp.63-80
• /
• 1974

The chemical components of Citrus junos produced in Korea were divided into two parts; common and special components respectively. In the former the relation between the physiological effects of the plant and its ripening process was observed periodically while the latter was analyzed the ripening fruits for their effective utilization as food. The results are summarized as follows: 1. The analytical result of seasonal change showed that the rind ratio was higher than the flesh ratio and on a regional basis, the rind ratio was higher in the islands than on land areas. 2. In the experiment the moisture was increased until the third period, but afterwards it was made constant. While the content of crude fat, cellulose, ash, total acid and soluble non-nitrogen material were decreased until the third period and the cotent of cellulose and total acid were continuousely redused until the last period. In con trast with the above the content of reducing sugars was increased but the content of crude fat, cellulose, ash, crude protein and soluble non-nitrogen material were increased until last period. 3. The content of vitamin C was richer in the rind than in the flesh, in the Korean species than in the Japanese. 4. Free sugars; xylose, fructose, glucose were richer in the rind than in the flesh. 5. The content of volatile organic acids was richer in the rind than in the flesh. Among them, volatile acids, acetic acid, formic and n-valeric acid were found in the rind and formic acid, acetic acid and propionic acid were deteceed in the flesh. 6. The total content of non-volatile acids was richer in the flesh than in the rind. In the kind of non-volatile acids, citric acid,glutaric acid, malic acid, tartaric acid, oxalic acid, malonic acid, succinic acid and an unknown acid were found in the rind and citric acid, malic acid, succinic acid, oxalic acid, glutaric acid and malonic acid in the flesh. 7. Three kinds of aromatic components: D-limonene, ${\alpha}-pinene$, p-cymene and seven other kinds of unknown aromatic components were detected in neutral essential oils. Among them, D-limonene seemed to be main aromatic component in the fruits. 8. From the above results it is confirmed that both rind and flesh of the ripened fruit could be utilized for food effectively, and unripened fruits are suitable for producing citric acid, ripened fruits are also useful for producing juice.

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.245-252
• /
• 2007

FTA (fault tree analysis), an analytical method for system failure management, was employed in the management of faults in running PCR analysis. PCR is executed through several processes, in which the process of PCR machine operation was selected for the analysis by FTA. The reason for choosing the simplest process in the PCR analysis was to adopt it as a first trial to test a feasibility of the FTA approach. First, fault events-top event, intermediate event, basic events-were identified by survey on expert knowledge of PCR. Then those events were correlated deductively to build a fault tree in hierarchical structure. The fault tree was evaluated qualitatively and quantitatively, yielding minimal cut sets, structural importance, common cause vulnerability, simulation of probability of occurrence of top event, cut set importance, item importance and sensitivity. The top event was 'errors in the step of PCR machine operation in running PCR analysis'. The major intermediate events were 'failures in instrument' and 'errors in actions in experiment'. The basic events were four events, one event and one event based on human errors, instrument failure and energy source failure, respectively. Those events were combined with Boolean logic gates-AND or OR, constructing a fault tree. In the qualitative evaluation of the tree, the basic events-'errors in preparing the reaction mixture', 'errors in setting temperature and time of PCR machine', 'failure of electrical power during running PCR machine', 'errors in selecting adequate PCR machine'-proved the most critical in the occurrence of the fault of the top event. In the quantitative evaluation, the list of the critical events were not the same as that from the qualitative evaluation. It was because the probability value of PCR machine failure, not on the list above though, increased with used time, and the probability of the events of electricity failure and defective of PCR machine were given zero due to rare likelihood of the events in general. It was concluded that this feasibility study is worth being a means to introduce the novel technique, FTA, to the management of faults in running PCR analysis.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.6
• /
• pp.59-76
• /
• 2019

Most technology-based entrepreneurship(TBE) go through an process of decline or disappear without overcoming the valley of death(VoD). The purpose of this study is to identify the growth dimension of TBE and to test the influence of firms activities on firms growth over time. This study identified the two-dimensional growth dimension divided by size and profit through exploratory factor analysis(EFA) of a number of growth indicators. Then, we defined the discrete state of growth firm in four states, divided by size and profit, and five states, including the closure of business. Multi-nomial logit model is used to predict the effect of TBE activities on a discrete state of growth firm(size×profit, closure of business) based on multiple independent variables. The independent variables are based on five representative firms activities: employment, marketing, R&D, financial activities, and general management activities. The growth stage of TBE over time has been categorized into three stages: early stage, middle stage, and late stage of business, taking into account the main periods during which the survival rate of startups sharply decreases. The analytical data of this study was based on the secondary data of the start-up supporting companies of government and public institutions. The subjects of analysis were TBE within 10 years. As a result of the empirical analysis, the employment and marketing activities of TBE show that early and mid-term activities had an effect on the state of firms growth. However, if there is a difference, employment activities have both positive and negative effects, while marketing activities have only a positive effect on size and profit growth. And besides, R&D activities, financial activities, and general management activities throughout the entire process of firms growth were found to be firms activities that have both positive and negative effects on firms growth. In addition, the age of the founder, the firms' industry, and the geographic location of the firms, which are general characteristics of the company, were found to have a distinctive effect on the growth status of the firms according to the growth stage.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.1
• /
• pp.11-26
• /
• 1984

The aim of this study is to establish a synthetical optimal method that simultaneously analyze and design reinforced concrete flat slab-column structures involving multi-constraints and multi-design variables. The variables adopted in this mathematical models consist of design variables including sectional sizes and steel areas of frames, and analysis variable of the ratio of bending moment redistribution. The cost function is taken as the objective function in the formulation of optimal problems. A number of constraint equations, involving the ultimate limit state and the serviceability limit state, is derived in accordance with BSI CP110 requirements on the basis of limit state design theory. Both objective function and constraint equations derived from design variables and an analysis variable generally become high degree nonlinear problems. Using SLP as an analytical method of nonlinear optimal problems, an optimal algorithm is developed so as to analyze and design the structures considered in this study. The developed algorithm is directly applied to a few reinforced concrete flat slab-column structures to assure the validity of it and the possibility of optimization From the research it is found that the algorithm developed in this study is applicable to the optimization of reinforced concrete flat slab column structures and it converges to a optimal solution with 4 to 6 iterations regardless of initial variables. The result shows that an economical design can be possible when compared with conventional designs. It is also found that considering the ratio of bending moment redistribution as a variable is reasonable. It has a great effect on the composition of optimal sections and the economy of structures.