• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.783-791
• /
• 2018

The biased estimation of low density rainfall network and radar rainfall has limited application to extreme rainfall in a small area. To improve this, more rainfall information needs to be produced. In this study, we analyzed the applicability of the vehicle rainfall sensor developed and used recently. The developed rainfall sensor was attached to the vehicle to observe the rainfall according to the movement of the vehicle. The analytical method used time series and average rainfall values for observations of rainfall sensors and nearby rainfall stations. The results show that the trend of observed values according to rainfall events shows a certain pattern. It is analyzed that it is caused by various causes such as the difference between the observation position of the rainfall sensor and the nearby rainfall station, the moving speed of the vehicle, and the rainfall observation method. This result shows the possibility of rainfall observation using a rainfall sensor for a vehicle, and it is possible to observe rainfall more precisely through experiments and improvement of rainfall sensors in various conditions in the future.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.4
• /
• pp.399-405
• /
• 2018

The platelet count in clinical laboratories is essential for the diagnosis and treatment of hemostasis abnormalities, and accurate platelet counting in the low count range is of prime importance for deciding if a platelet transfusion is needed and for monitoring after chemotherapy. Quality control is designed to reduce and correct any deficiencies in the internal analytical process of a clinical laboratory prior to the release of patient results. Fragmented erythrocytes are the major confusing factors for platelet counting because of their similar size to platelets. The authors found that the low range QC values were out of 2SD with a Sysmex automatic analyzer in internal quality control process. Thus far, there has been little discussion on the relationship between hemolysis and the platelet parameters. Therefore, this study focused on the performance of automated platelet counts, including the PLT-F, the PLT-I, and PLT-O methods at the low platelet range using the low level QC materials and compared the 5 platelet parameters with the hemolyzed samples. The results showed that the CV was the smallest with PLT-F and P-LCR increased from 18.4 to 31.9% in the hemolysis samples. These results indicate that a more accurate estimation of the platelet counts can be achieved using the PLT-F method than the PLT-I method at the low platelet range. The use of the PLT-F system improves the confidence of results in low platelets samples in a routine hematology laboratory. The results suggest that P-LCR is a new parameter in assessing samples when the specimen is suspected of hemolysis and deterioration. Nevertheless, further studies will be needed to establish the relationship with P-LCR and hemolysis using human blood specimens.

• Korean Journal of Food Science and Technology
• /
• v.51 no.4
• /
• pp.301-308
• /
• 2019

The antioxidant properties of Eriobotrya japonica leaf extract were investigated using DPPH and ABTS radical scavenging assay. The 80% ethanol extract of leaves ($IC_{50}$ values for DPPH and ABTS were 13.9 and $10.9{\mu}g/mL$, respectively) and young leaves ($IC_{50}$ values for DPPH and ABTS were 20.7 and $17.3{\mu}g/mL$, respectively) showed high radical scavenging activity. Additionally, the quantitative method for estimation of ellagic acid and chlorogenic acid from E. japonica leaves was optimized by HPLC/DAD. This method showed high linearity of the calibration curve with a coefficient of correlation ($R^2$) equal to 0.999. The LOD values for ellagic acid and chlorogenic acid were 2.35 and $0.73{\mu}g/mL$, respectively, whereas LOQ values were 7.13 and $2.22{\mu}g/mL$, respectively. Recovery of the two compounds was 99.7-108.0% with RSD values less than 5.31%. These results suggest that 80% ethanol extract of E. japonica leaves could serve as a potential source of natural antioxidant for us in various industrial applications.

• Journal of Korea Water Resources Association
• /
• v.53 no.12
• /
• pp.1203-1210
• /
• 2020

Drought is caused by a combination of various hydrological or meteorological factor, so it is difficult to accurately assess drought event, but various drought indices have been developed to interpret them quantitatively. However, the drought indexes currently being used are calculated from the lack of a single variable, which is a problem that does not accurately determine the drought event caused by complex causes. Shortage of a single variable may not be a drought, but it is judged to be a drought. On the other hand, research on developing indices using unstructured data, which is widely used in big data analysis, is being carried out in other fields and proven to be superior. Therefore, in this study, we intend to calculate the drought index by combining unstructured data (news data) with weather and hydrologic information (rainfall and dam inflow) that are being used for the existing drought index, and to evaluate the utilization of drought interpretation through verification of the calculated drought index. The Clayton Copula function was used to calculate the joint drought index, and the parameter estimation was used by the calibration method. The analysis showed that the drought index, which combines unstructured data, properly expresses the drought period compared to the existing drought index (SPI, SDI). In addition, ROC scores were calculated higher than existing drought indices, making them more useful in drought interpretation. The joint drought index calculated in this study is considered highly useful in that it complements the analytical limits of the existing single variable drought index and provides excellent utilization of the drought index using unstructured data.

• Korean Journal of Community Nutrition
• /
• v.27 no.3
• /
• pp.245-253
• /
• 2022

Objectives: This study was conducted to find out if the dietary iron intake of Koreans estimated by 2 different methods (iron content sources) using the food intake data from the Korea National Health and Nutrition Examination Survey (KNHANES) are comparable. One method was based on the KNHANES's Food & Nutrient Database (FND) derived mainly from the Korean Food Composition Table and the other used the iron content (IC) of food samples processed in the Korean Total Diet Study (KTDS). Methods: Dietary intake data from the 2013-2016 KNHANES was used to select representative foods (RFs) in KTDS for iron analysis. Selection of the RFs and cooking methods for each RF (RF × cooking method pair) was performed according to the 'Guidebook for Korean Total Diet Studies' and resulted in a total of 132 RFs and 224 'RF × cooking method' pairs. RFs were collected in 9 metropolitan cities nationwide once or twice (for those with seasonality) in 2018 and made into 6 composites each, based on the origin and season prior to cooking. Then, the RF composites prepared to a 'table ready' state for KTDS were analyzed by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Dietary iron intake of the Korean population was estimated using only RFs' intake data based on the 2 sources of iron content, namely FND-KNHANES and IC-KTDS. Results: RFs in KTDS covered 92.0% of total food intake of Koreans in the 2016-2018 KNHANES. Mean iron intake of Koreans was 7.77 mg/person/day by IC-KTDS vs 9.73 mg/person/day by FND-KNHANES. The major food groups contributing to iron intake were meats (21.7%), vegetables (20.5%), and grains & cereals (13.4%) as per IC-KTDS. On the other hand, the latter source (FND-KNHANES) resulted in a very different profile: grains & cereals (31.1%), vegetables (16.8%), and meats (15.3%). While the top iron source was beef, accounting for 8.6% in the former, it was polished rice (19.2%) in the latter. There was a 10-fold difference in the iron content of polished rice between 2 sources that iron intakes excluding the contribution by polished rice resulted in very similar values: 7.58 mg/person/day by IC-KTDS and 7.86 mg/person/day by FND-KNHANES. Conclusions: This study revealed that the dietary iron intake estimated by 2 different methods were quite comparable, excluding one RF, namely polished rice. KTDS was thus proven to be a useful tool in estimating a 'closer-to-real' dietary intake of nutrients for Koreans and further research on various nutrients is warranted.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1011-1020
• /
• 2022

Previous studies for the assessment of submarine groundwater discharge (SGD) were perfomed for areas where a large amount of SGD was observed. Newly developed assessment methods were proposed that was based on an analytic solution using sharp interface model. The proposed mathematical equations used the existing observed groundwater level and hydrogeological data of Jeju Island as input data. The quantitatively assessed FSGD values were compared to the basin-scale recharge estimation values in Seong-San area in eastern Jeju. As a result of the study, it was estimated that the amount of FSGD in the Seongsan area ranges from about 2.65 to 9.15% of the amount of areal-recharge. Through the analysis of the FSGD combined with the analytic model, it is to be provided as a scientific tool to establish a more reasonable coastal water resource management plan.

• Smart Structures and Systems
• /
• v.32 no.4
• /
• pp.267-279
• /
• 2023

Data modelling and interpretation for structural health monitoring (SHM) field data are critical for evaluating structural performance and quantifying the vulnerability of infrastructure systems. In order to improve the data modelling accuracy, and extend the application range from data regression analysis to out-of-sample forecasting analysis, an improved most likely heteroscedastic Gaussian process (iMLHGP) methodology is proposed in this study by the incorporation of the outof-sample forecasting algorithm. The proposed iMLHGP method overcomes this limitation of constant variance of Gaussian process (GP), and can be used for estimating non-stationary typhoon-induced response statistics with high volatility. The first attempt at performing data regression and forecasting analysis on structural responses using the proposed iMLHGP method has been presented by applying it to real-world filed SHM data from an instrumented cable-stay bridge during typhoon events. Uncertainty quantification and correlation analysis were also carried out to investigate the influence of typhoons on bridge strain data. Results show that the iMLHGP method has high accuracy in both regression and out-of-sample forecasting. The iMLHGP framework takes both data heteroscedasticity and accurate analytical processing of noise variance (replace with a point estimation on the most likely value) into account to avoid the intensive computational effort. According to uncertainty quantification and correlation analysis results, the uncertainties of strain measurements are affected by both traffic and wind speed. The overall change of bridge strain is affected by temperature, and the local fluctuation is greatly affected by wind speed in typhoon conditions.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.1
• /
• pp.53-66
• /
• 1980

The research work is concerned with the analytical and experimental studies on the heat transfer phenomenon around the underground concrete digester used for biogas production Systems. A mathematical and computational method was developed to estimate heat losses from underground cylindrical concrete digester used for biogas production systems. To test its feasibility and to evaluate thermal parameters of materials related, the method was applied to six physical model digesters. The cylindrical concrete digester was taken as a physical model, to which the model,atical model of heat balance can be applied. The mathematical model was transformed by means of finite element method and used to analyze temperature distribution with respect to several boundary conditions and design parameters. The design parameters of experimental digesters were selected as; three different sizes 40cm by 80cm, 80cm by 160cm and l00cm by 200cm in diameter and height; two different levels of insulation materials-plain concrete and vermiculite mixing in concrete; and two different types of installation-underground and half-exposed. In order to carry out a particular aim of this study, the liquid within the digester was substituted by water, and its temperature was controlled in five levels-35。 C, 30。 C, 25。 C, 20。C and 15。C; and the ambient air temperature and ground temperature were checked out of the system under natural winter climate conditions. The following results were drawn from the study. 1.The analytical method, by which the estimated values of temperature distribution around a cylindrical digester were obtained, was able to be generally accepted from the comparison of the estimated values with the measured. However, the difference between the estimated and measured temperature had a trend to be considerably increased when the ambient temperature was relatively low. This was mainly related variations of input parameters including the thermal conductivity of soil, applied to the numerical analysis. Consequently, the improvement of these input data for the simulated operation of the numerical analysis is expected as an approach to obtain better refined estimation. 2.The difference between estimated and measured heat losses was shown to have the similar trend to that of temperature distribution discussed above. 3.It was found that a map of isothermal lines drawn from the estimated temperature distribution was very useful for a general observation of the direction and rate of heat transfer within the boundary. From this analysis, it was interpreted that most of heat losses is passed through the triangular section bounded within 45 degrees toward the wall at the bottom edge of the digesten Therefore, any effective insulation should be considered within this region. 4.It was verified by experiment that heat loss per unit volume of liquid was reduced as the size of the digester became larger For instance, at the liquid temperature of 35˚ C, the heat loss per unit volume from the 0. 1m$^3$ digester was 1, 050 Kcal/hr m$^3$, while at for 1. 57m$^3$ digester was 150 Kcal/hr m$^3$. 5.In the light of insulation, the vermiculite concrete was consistently shown to be superior to the plain concrete. At the liquid temperature ranging from 15。 C to 350 C, the reduction of heat loss was ranged from 5% to 25% for the half-exposed digester, while from 10% to 28% for the fully underground digester. 6.In the comparison of heat loss between the half-exposed and underground digesters, the heat loss from the former was fr6m 1,6 to 2, 6 times as much as that from the latter. This leads to the evidence that the underground digester takes advantage of heat conservation during winter.

• Journal of Animal Science and Technology
• /
• v.53 no.4
• /
• pp.325-332
• /
• 2011

This research was conducted to analyze the effects of raising farm on the heritability and breeding values of Hanwoo cows for their carcass traits, including cold carcass weight (CWT), back-fat thickness (BFT), eye-muscle area (EMA) and marbling score (MAR). The carcass data and pedigree data were collected from steers raised on Hanwoo farms in Pyeongchang-gun, Gangwon-do, South Korea. Three analytical models were applied for the estimation of heritabilities and breeding values. The first model (model 1) included slaughter house-year-month combination as fixed effects and age at slaughter was fitted as linear and quadratic covariates. The second model (model 2) was similar to model 1, but raising farm was additionally included as random effect. The third model (model 3) was similar to model 1 but farm effects were additionally included as fixed effect. The comparisons between the model 1 and the models including farm effect (model 2 and model 3) revealed that heritability estimates from model 2 or model 3 were smaller to those from model 1 for all carcass traits. Especially, obvious decrease of heritability was observed in CWT where heritability was 0.23 from model 1, 0.15 from model 2 and 0.18 from model 3. The maximum log likelihood of the model 2 and 3 were higher than those of model 1 for all traits. In model 2 that raising farm was included as a random effect, the ratio of farm variance to the total phenotypic variance were ranged from 4% (EMA) to 18% (CWT). Top 10% and bottom 10% of female cows were selected based on the breeding values from model 1, and the Spearman's rank correlation coefficients among models were estimated for each trait within selected group. The correlation coefficients were ranged from 0.57 to 0.95 in top 10% group and from 0.68 to 0.95 in bottom 10% group. These results show that the discrepancies in the rankings of breeding values can be based on the models applied. In conclusion, the results obtained in this study suggest that the herd effect or farm effect should be included in the analytical model when breeding values are estimated with the purpose of improvement of carcass traits of Hanwoo breeding cows.

• Korean Security Journal
• /
• no.42
• /
• pp.59-85
• /
• 2015

The purpose of this study is to establish the structural relationship among organizational ethical climate, job satisfaction, and organizational citizenship behavior. It was intended for the private security guards who work in the security companies in Seoul and Gyeonggi from Jan. 1st, 2014 to Apr. 1st, 2014 to achieve the purpose like this. Purposive sampling was used as the sampling method according to this and sampling of 400 persons was done. However, the samples of 372 persons were finally used in the analysis through the process to check faithless answers, double answers, and abnormal data. The collected data was analyzed according to the purpose of the study by utilizing STATA 13.0 and AMOS 17.0. And for statistic techniques, frequency analysis, descriptive analysis, multivariate normality, confirmatory factor analysis(CFA), Pearson's correlation analysis, and structural equation model analysis were carried out. The conclusion gotten from this study through the data analyses according to the methods and procedure like this is as follow: First, organizational ethical climate has found to have the positive effect on job satisfaction(Non-standard $B=1.427^{***}$). That is, it can be interpreted that organizational ethical climate positively affects superiors, fellow employees, pay, current duties, and chances of promotion. Second, job satisfaction has found not to have the significant effect on organizational citizenship behavior. That is, it can be interpreted that job satisfaction does not affect altruism, conscience, and participation behavior. Third, organizational ethical climate has found to have the positive effect on organizational citizenship behavior (Non-standard $B=.361^{***}$). That is, it can be interpreted that organizational ethical climate positively affects altruism, conscience, and participation behavior. Fourth, the relationship between organizational ethical climate and organizational citizens has found that there is no any indirect effect in the bootstrapping estimation result to establish the indirect effect of job satisfaction. Fifth, the relationship between organizational ethical climate and job satisfaction has found that there are the moderating effects in the analytical result of the moderating effects of person-organization fit. That is, the effects of organizational ethical climate on job satisfaction have found that the groups with higher person-organization fit are more positive than those with lower person-organization fit. Sixth, the relationship between job satisfaction and organizational citizenship behavior has found that there are moderating effects in the analytical result of person-organization fit. That is, the effects of job satisfaction on organizational citizenship behavior have found that the groups with higher person-organization fit are more positive than those with lower person-organization fit.