• 대한조선학회지
• /
• 제18권1호
• /
• pp.1-8
• /
• 1981

To contribute to the preventive measures against local vibrations of ship's deck panels, some investigations into the prediction method of the natural frequency of the vibration of stiffened plates were done. Firstly, an analytical method based on the orthotropic plate analogy and the Rayleigh method using eigenfunctions of the Euler beam was shown, and numerical results of a regularly stiffened plate were compared with experimental results. And then, the method was extended to stiffened plates having one or two irregular stiffeners to obtain an approximate formula showing the relation between the change of the natural frequency and the size of the irregular stiffeners. The latter case was investigated for the purpose of providing a convenient design manual applicable to cure of local resonant vibrations of ships' deck panels by additional reinforcement of one or two stiffeners. In the analytical development the boundary was assumed to be rigidly supported and elastically restrained against rotation. In the experiment, however, only an extreme case i.e. simply supported boundary was investigated. The results of the investigation show that there is a fairly good conformity between the analytical results and the experimental ones in the first case, and that the approximate formula for the second case is confirmed also to be reliable for the design purpose. Considering that actual boundary conditions of deck panels in ship structures lie mostly somewhere between the simple support and the fixed, the authors discussed problems of the joint efficiency at the boundary of deck panels from the viewpoint of the practical application of the formulae.

• Earthquakes and Structures
• /
• 제12권5호
• /
• pp.489-499
• /
• 2017

The effects of past earthquakes have demonstrated the seismic vulnerability of confined masonry structures (CMSs) to earthquakes. The results of experimental analysis indicate that damage to these structures depends on lateral displacement applied to the walls. Seismic evaluation lacks an analytical approach because of the complexity of the behavior of this type of structure; an empirical approach is often used for this purpose. Seismic assessment and risk analysis of CMSs, especially in area have a large number of such buildings is difficult and could be riddled with error. The present study used analytical and numerical models to develop a simplified nonlinear displacement-based approach for seismic assessment of a CMS. The methodology is based on the concept of ESDOF and displacement demand and is compared with displacement capacity at the characteristic period of vibration according to performance level. Displacement demand was identified using the nonlinear displacement spectrum for a specified limit state. This approach is based on a macro model and nonlinear incremental dynamic analysis of a 3D prototype structure taking into account uncertainty of the mechanical properties and results in a simple, precise method for seismic assessment of a CMS. To validate the approach, a case study was considered in the form of an analytical fragility curve which was then compared with the precise method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권1호
• /
• pp.63-73
• /
• 2004

A simple analytical model has been presented for the study of the optical bistability using a $GaAs-Al_{0.32}Ga_{0.68}As$ multiple quantum well (MQW) p-i-n diode structure. The calculation of the optical absorption is based on a semi-emperical model which is accurately valid for a range of wells between 5 and 20 nm and the electric field F< 200kV/cm . The electric field dependent analytical expression for the responsivity is presented. An attempt has been made to derive the analytical relationship between the incident optical power ( $(P_{in})$ ) and the voltage V across the device when the diode is reverse biased by a power supply in series with a load resistor. The relationship between $P_{in}$ and $P_{out}$ (i.e. transmitted optical power) is also presented. Numerical results are presented for a typical case of well size $L_Z=10.5nm,\;barrier\;size\;L_B=9.5nm$ optical wave length l = 851.7nm and electric field F? 100kV/cm. It has been shown that for the values of $P_{in}$ within certain range, the device changes its state in such a way that corresponding to every value of $P_{in}$ , two stable states and one unstable state of V as well as of $P_{out}$ are obtained which shows the optically controlled bistable nature of the device.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.128-138
• /
• 2008

VE of the scripture season enterprises and it respected LCC analyzes from the research which it sees and to use AHP techniques and definite LCC techniques and probabilistic LCC techniques selects the optimum route the case study which it executed. It presented the quality rating model in about the resultant most route lascivious at the time of VE evaluation, in order to select the alternative of optimum AHP techniques which are one in decision-making technique and an evaluation item by weight and a grade it applied the mountaintop it did. Also the definite LCC analyzer law departments of existing together it applied the probabilistic LCC techniques which use Monte Carlo Simulation in about analytical prices and reliability height boil. The economical efficiency was excellent with VE/LCC analytical resultant route and facility size abridgment, the rivers most it will be able to minimize an environmental effect with short distance traverse, the selection this hit preparation LCC which separates from the land use side decreased, the value (V) above 22.0% with the fact that it improves. And, the reliability of the probabilistic LCC analytical resultant analytical results in compliance with Monte Carlo Simulation with 90.3% was very analyzed with the fact that it is a high level.

• Earthquakes and Structures
• /
• 제12권2호
• /
• pp.145-152
• /
• 2017

The analytical method is used to develop new models for an elevated tank to estimate its natural period. The equivalent mass- spring method is used to configure the developed analytical models. Also direct method is used for numerical verification. The current study shows that developed models can have a good estimation of natural period compared with concluded results of finite elements. Additional results show that, the dependency of impulsive period to soil stiffness condition is higher than convective period. Furthermore results show that considering the fluid- structure- soil interaction has remarkable effects on natural impulsive and convective periods in case of hard to very soft soil.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.491-496
• /
• 2003

In sensitivity analysis, semi-analytical method(SAM) reveals severe inaccuracy problem when relatively large rigid body motions are identified for individual elements. Recently such errors of SAM resulted by the finite difference scheme have been improved by the separation of rigid body mode. But the eigenvalue should be obtained first before the sensitivity analysis is performed and it takes much time in the case that large system is considered. In the present study, by constructing a reduced one from the original system, iterative method combined with mode decomposition technique is proposed to compute reliable semi-analytical design sensitivities. The sensitivity analysis is performed by the eigenvector acquired from the reduced system. The error of SAM caused by difference scheme is alleviated by Von Neumann series approximation.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.75-78
• /
• 2004

Traditionally aluminum alloy have been used in manufacturing of aircraft structures, and semi-monocoque structural concept have been mainly applied in structural design of fuselage and wing. However, recently monocoque structural concept is applied in many small-size aircraft structures manufactured with composite materials. In such case appling monocoque structural concept, in initial conceptual design stage on wing, it is not easy to analyze shear flow using classical shear flow analytical method because composite skin structure can support span-wise tension/compression stress as well as sectional shear stress. In this study, an extended shear-flow analytical method to apply to composite monocoque structural concept was developed through extending the classical shear-flow analytical method.

• 한국노년학
• /
• 제36권3호
• /
• pp.649-671
• /
• 2016

본 연구는 노인자살 예방서비스 실천과정에서 경험하는 성과의 의미를 파악하는 데 목적을 두고 있다. 이를 위해 노인자살 예방서비스 제공기관의 기관장, 실무자, 서비스 이용자의 시각에서 나타난 성과를 서비스 제공기관의 측면과 서비스 이용자의 측면, 그리고 다차원적 시각에서 분석하였다. 연구방법은 질적연구의 한 방법으로 사례연구 방법을 활용하였다. 분석결과, 노인자살 예방서비스 제공기관의 기관장과 실무자가 공통적으로 인식하는 성과는 '서비스 실천과정에서 구조적인 장애물을 인식하고, 서비스 이용자와 지역사회의 변화를 경험하는 성취'로 나타났으며, 서비스 이용자는 '서비스 경험에 따른 내면의 인식변화'로 나타났다. 분석 주체별로 살펴본 성과의 의미와 본질은 첫째, 기관장이 인식하는 성과는 '서비스를 통해 기관의 정체성이 재발견되는 과정'으로, 둘째, 실무자가 인식하는 성과는 '지역사회와 조직에서 살아남기 위해 몸부림치는 과정 속에서 서비스 이용자들의 변화를 경험하며 지역사회와 조직에서 인정받기'로, 셋째, 서비스 이용자가 인식하는 서비스 경험의 성과는 '벼랑 끝에서 생명의 끈 부여잡기'로 나타났다. 이러한 분석결과를 토대로, 노인자살 예방서비스 실천현장의 성과측정을 위한 실천적, 정책적 시사점을 제시하였다.

• 한국지반공학회논문집
• /
• 제31권7호
• /
• pp.13-28
• /
• 2015

본 연구에서는 잔류간극수압의 추정에 관한 기존의 해석해에서 지적된 오류를 수정한 Lee et al.(2015a)의 연구결과를 진행파와 흐름의 공존장으로 확장한다. 이 때, 흐름이 없는 경우를 대상으로 한 Lee et al.(2015a)의 이론결과에 흐름에 의한 입사파의 주기와 파장의 변화를 고려하여야 한다. 검증에서는 Laplace 변환법으로부터 무한 두께의 경우에 대해서만 해를 제시한 Jeng and Seymour(2007)의 해석해와 Fourier 급수전개법에 의한 본 해석해의 두 결과를 비교하여 각각 상이한 형태를 갖는 두 해석해의 결과가 완전히 동일하다는 것을 확인할 수 있었다. 따라서, 유한, 무한 및 얕은 두께의 해저지반에 대한 각 해석해에 흐름속도의 크기와 방향, 지반두께 및 입사파 주기 등을 변화시켜 잔류간극수두의 변화특성을 면밀히 분석 검토하였다. 제시되는 각 해석해에서 지반두께의 변화에 의해 유한 두께의 토층에서 얕은 두께로의 점근적인 접근은 가능하지만, 무한 두께로의 접근은 불가능하며, 유한 두께와 무한 두께의 사이에는 동일한 토층 두께에 대해서도 서로의 결과가 일치하지 않는 경우가 있다는 것을 확인할 수 있었다.

• Steel and Composite Structures
• /
• 제51권1호
• /
• pp.93-101
• /
• 2024

This paper presents an experimental and analytical study on a steel slit damper designed as an energy dissipative device for earthquake protection of structures considering soil-structure interaction. The steel slit damper is made of a steel plate with a number of slits cut out of it. The slit damper has an advantage as a seismic energy dissipation device in that the stiffness and the yield force of the damper can be easily controlled by changing the number and size of the vertical strips. Cyclic loading tests of the slit damper are carried out to verify its energy dissipation capability, and an analytical model is developed validated based on the test results. The seismic performance of a case study building is then assessed using nonlinear dynamic analysis with and without soil-structure interaction. The soil-structure system turns out to show larger seismic responses and thus seismic retrofit is required to satisfy a predefined performance limit state. The developed slit dampers are employed as a seismic energy dissipation device for retrofitting the case study structure taking into account the soil-structure interaction. The seismic performance evaluation of the model structure shows that the device works stably and dissipates significant amount of seismic energy during earthquake excitations, and is effective in lowering the seismic response of structures standing on soft soil.