• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.58-70
• /
• 2020

Detour behavior on the expressway means that the driver uses the local road by passing the part of the expressway which is stagnant at the time of the traffic demand such as holidays. Since the detour rate was estimated through the survey at toll gate in the past, there was a difficulty in estimating the actual detour rate due to the small sample of the survey. In this study, we use DSRC-based route travel data to conduct empirical studies on detour patterns such as the estimation of actual detour rate, the improvement of travel time using detour road, and the correlation between traffic conditions on the expressway and detour rate. On the day of Chuseok and the day before Chuseok, the analysis of Giheung-DongtanIC→OsanIC and Seopyeongtaek IC→Walgott JC showed that the use of detour roads increased gradually during the congestion of the main line and travel time reduced when using detour roads, However, when the traffic congestion of the main line is not severe, the travel time increases when using the detour roads. The correlation between the traffic condition of the expressway and the actual detour rate has a negative correlation, which is consistent with the congestion pattern of the main line. The results of this study can be used to overcome limitations of detour pattern research based on surveys in the past and to establish a detour strategy for expressway sections where traffic demand is concentrated.

• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.303-314
• /
• 2014

This study develops a $CO_2$ emissions estimation method, which considers different O/D travel patterns and through traffic volumes, in different regions for $CO_2$ emissions management in the field of transportation. In the research, O/D and network data provided by the Korea Transport Database (KTDB) Center are used as basic data. The results show that the total emission was similar to the Metropolitan's total emission which was estimated by KTDB (2009). With the analysis focusing on Gyeonggi-do, the results show that $CO_2$ emission from through traffic volumes was greater than $CO_2$ emissions of the Intra-Regional in southern regions; By contrast, $CO_2$ emissions of the Intra-Regional was greater than that from through traffic volumes in northern regions. Therefore, the $CO_2$ emissions management needs to be segregated into local government and nation with each travel pattern.

• Journal of Korean Society of Transportation
• /
• v.30 no.4
• /
• pp.43-59
• /
• 2012

Assuming a completed Smart Highway road & communication environment that allows real-time information collection and transmission of road traffic condition ahead, the purpose of this study is to develop a plan for inducing a network-level safe driving pattern by providing road traffic condition and safety information to multiple drivers through a road information provision device. In this study, the device with a function that displays different colors according to the hazard level to the existing delineator has been named 'Smart Delineator'. Smart Delineator is a device that provides not only alignment information but also safety information for drivers to receive real-time warning information and intuitively recognize road traffic condition ahead so that drivers can respond. To examine the effects of safety driving inducement level on drivers, a simulation test was conducted using driving simulator as well as a satisfaction survey. The result showed that the Smart Delineator was able to identify the location of occurrence and affecting driving according pattern, either adhering to recommended speed or reducing speed according to the pre-defined hazard level.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.35-45
• /
• 2018

PURPOSES : This study examines the performance changes of road networks according to the strength of a disaster, and proposes a method for estimating the quantitative resilience according to the road-network performance changes and damage scale. This study also selected high-influence road sections, according to disasters targeting the road network, and aimed to analyze their hazard resilience from the network aspect through a scenario analysis of the damage recovery after a disaster occurred. METHODS : The analysis was conducted targeting Sejong City in South Korea. The disaster situation was set up using the TransCAD and VISSIM traffic-simulation software. First, the study analyzed how road-network damage changed the user's travel pattern and travel time, and how it affected the complete network. Secondly, the functional aspects of the road networks were analyzed using quantitative resilience. Finally, based on the road-network performance change and resilience, priority-management road sections were selected. RESULTS : According to the analysis results, when a road section has relatively low connectivity and low traffic, its effect on the complete network is insignificant. Moreover, certain road sections with relatively high importance can suffer a performance loss from major damage, for e.g., sections where bridges, tunnels, or underground roads are located, roads where no bypasses exist or they exist far from the concerned road, including entrances and exits to suburban areas. Relatively important roads have the potential to significantly degrade the network performance when a disaster occurs. Because of the high risk of delays or isolation, they may lead to secondary damage. Thus, it is necessary to manage the roads to maintain their performance. CONCLUSIONS : As a baseline study to establish measures for traffic prevention, this study considered the performance of a road network, selected high-influence road sections within the road network, and analyzed the quantitative resilience of the road network according to scenarios. The road users' passage-pattern changes were analyzed through simulation analysis using the User Equilibrium model. Based on the analysis results, the resilience in each scenario was examined and compared. Sections where a road's performance loss had a significant influence on the network were targeted. The study results were judged to become basic research data for establishing response plans to restore the original functions and performance of the destroyed and damage road networks, and for selecting maintenance priorities.

• Journal of Information Technology and Architecture
• /
• v.10 no.1
• /
• pp.101-111
• /
• 2013

Internet traffic volume has been increasing rapidly due to popularization of various smart devices and Internet development. In particular, HTTP-based traffic volume of smart devices is increasing rapidly in addition to desktop traffic volume. The increased mobile traffic can cause serious problems such as network overload, web security, and QoS. In order to solve these problems of the Internet overload and security, it is necessary to accurately detect applications. Traditionally, well-known port based method is utilized in traffic classification. However, this method shows low accuracy since P2P applications exploit a TCP/80 port, which is used for the HTTP protocol; to avoid firewall or IDS. Signature-based method is proposed to solve the lower accuracy problem. This method shows higher analysis rate but it has overhead of signature generation. Also, previous signature-based study only analyzes applications in HTTP protocol-level not application-level. That is, it is difficult to identify application name. Therefore, previous study only performs protocol-level analysis. In this paper, we propose a signature generation method to classify HTTP-based traffics in application-level using the characteristics of typical semi HTTP header. By applying our proposed method to campus network traffic, we validate feasibility of our method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.98-112
• /
• 2018

Intentional aggressive driving (IAD) is a very dangerous driving behavior that threatens to attack the adjacent vehicles. Most existing studies have focused on the independent driving characteristics of attack drivers. However, the identification of interactions between the offender and the victim is necessary for the traffic safety analysis. This study established multi-agent driving simulation environments to systematically analyze vehicle interactions in terms of traffic safety. Time-to-collision (TTC) was adopted to quantify vehicle interactions in terms of traffic safety. In addition, a exponential decay function was further applied to compare the overall pattern of change in crash potentials when IAD events occurred. The outcome of this study would be useful in developing policy-making activities to enhance traffic safety by reducing dangerous driving events including intentional aggressive driving.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.762-777
• /
• 2014

With the increasing usage of cloud applications such as MapReduce and social networking, the amount of data traffic in data center networks continues to grow. Moreover, these appli-cations follow the incast traffic pattern, where a large burst of traffic sent by a number of senders, accumulates simultaneously at the shallow-buffered data center switches. This causes severe packet losses. The currently deployed TCP is custom-tailored for the wide-area Internet. This causes cloud applications to suffer long completion times towing to the packet losses, and hence, results in a poor quality of service. An Explicit Congestion Notification (ECN)-based approach is an attractive solution that conservatively adjusts to the network congestion in advance. This legacy approach, however, lacks scalability in terms of the number of flows. In this paper, we reveal the primary cause of the scalability issue through analysis, and propose a new congestion-control algorithm called FaST. FaST employs a novel, virtual congestion window to conduct fine-grained congestion control that results in improved scalability. Fur-thermore, FaST is easy to deploy since it requires only a few software modifications at the server-side. Through ns-3 simulations, we show that FaST improves the scalability of data center networks compared with the existing approaches.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.3
• /
• pp.27-35
• /
• 2002

A knowledge-based image retrieval technique is image searching methods using some features from the queried image. The materials in this study are automobile head lamps. The input data is composed of characters and images which have various pattern. The numbers, special symbols, and general letters are under the category of the character. The image informations are made up of the distribution of pixel data, statistical analysis, and state of pattern which are useful for the knowledge data. In this paper, we implemented a retrieval system for the scientific crime detection at traffic accident using the proposed multi knowledge-based image retrieval technique. The values for the multi knowledge-based image features were extracted from color and gray scale each. With this 22 features, we improved the retrieval efficiency about the color information and pattern information. Visual basic, crystal report and MS access DB were used for this application. We anticipate the efficient scientific detection for the traffic accident and the tracking of suspicious vehicle.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.21-32
• /
• 2007

The households to be surveyed are usually huge number at the level of a city or metropolitan survey, not to mention a nationwide travel survey. Therefore, household travel surveys to figure out true origin-destination (O/D) trip patterns (population O/D) are conducted through a sampling method rather than by surveying all of the population in the system. Therefore, the population O/D pattern can only be estimated by expanding the sampled O/D patterns to the population. It is very difficult to avoid the errors involved in the process of sampling, surveying and expanding O/D data. In order to minimize such errors while estimating the true O/D patterns of the population, the validation and adjustment process should employed by doing a comparison between the expanded sample O/D data and observed link traffic volumes. This study suggests a method of validation and adjustment of the expanded sample O/D data by comparing observed link volumes at several screenlines. The study also suggests a practical technique to modify O/D pairs which are excluded in the screenline validation process by comparing observed traffic volume with the results of traffic assignment analysis. An empirical study was also conducted as an example applying the suggested methods of validation and adjustment with Korea's nationwide O/D data and highway network.

• Journal of KIISE:Information Networking
• /
• v.34 no.3
• /
• pp.156-167
• /
• 2007

In this paper, we develop the model based prediction algorithm for Variable-Bit-Rate(VBR) video traffic with regular Group of Picture(GOP) pattern. We use multiplicative ARIMA process called GOP ARIMA (ARIMA for Group Of Pictures) as a base stochastic model. Kalman Filter based prediction algorithm consists of two process: GOP ARIMA modeling and prediction. In performance study, we produce three video traces (news, drama, sports) and we compare the accuracy of three different prediction schemes: Kalman Filter based prediction, linear prediction, and double exponential smoothing. The proposed prediction algorithm yields superior prediction accuracy than the other two. We also show that confidence interval analysis can effectively detect scene changes of the sample video sequence. The Kalman filter based prediction algorithm proposed in this work makes significant contributions to various aspects of network traffic engineering and resource allocation.