• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2952-2960
• /
• 2011

The railway safety in Koreaisthreatenedduetotherestructuring of the railway industries, introduction of the Korea Train eXpress (KTX) and electrification of the conventional lines. Many technical backgrounds are required to control railway accidents as low as reasonably practicable, such as a railway safety act, safety standards, and safety assessment infrastructures. Korean government and the Korea Railroad Research Institute (KRRI) are conducting an integrated R&D program for improvement of the railway safety, where the target is to reduce the accident fatalities by half. The program is composed of three parts; the safety system engineering and the program management, the establishment of a safety management system, and the development of techniques for assessing and preventing major railway accidents. Details of the research programs are explained in this paper, where risk is used as the major control measure.

• International Journal of Railway
• /
• v.5 no.2
• /
• pp.77-83
• /
• 2012

Railroad signaling systems are to control intervals and routes of trains. There are ATS, ATP, ATO and ATC system. Trains are operated in the section which is met on the signaling system because various signaling systems are used in Korea. Hence, trains are not operated in the section which is used in the other signaling system. To solve this problem, recently combined on-board system has been developed. The combined on-board system designed by doubling the ATS, ATP and ATC system to ensure the safety of system. The inductance of antenna is change and in return the resonance frequency of antenna is varied by the electromagnetic induction. Therefore, the information signal is not received exactly in the combined on-board system and in return accidents between trains occur. In this paper, electric model of the combined on-board system for considering the ATS and ATP antenna is presented. Moreover, the mutual inductance including the distance between the ATS and ATP antenna is calculated. As a result of the frequency response of the antennas, the mutual inductance met on operation range of resonance frequency is defined.

• Journal of computational fluids engineering
• /
• v.18 no.1
• /
• pp.58-62
• /
• 2013

Personal Rapid Transit (PRT) is the emerging personal transport vehicle operating on the loop automatically. The PRT system utilize the electrical power from super capacity or battery, it is important to manage the power or energy. In this regards, the management of high temperature occurred by the operation of system is significantly important to prevent from serious damage of component. In this study, we studied the adequate shape of underbody which can reduce the heat accumulation by pickup coil and condenser using natural air cooling. We suggested the additional air pathway, air inlet and flow separator to decrease the temperature of the heat source components. It was found that suggested system can decrease the temperature of PRT under body by 16% during the static mode and by 10% during the running mode at 30km/h. It is expected that the findings of this study will feed into final design of newly built Korean PRT vehicle.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.410-416
• /
• 2008

The inter-industrial inducement effects of the korean railway services on the output, value-added, imports of the 403 industrial sectors of the korean economy have been computed by the input-output analysis technique utilizing the 2003 Input-Output Tables, which was published most recently in April 2007 by the Bank of Korea. The korean railway service industry produced \2,766 billion worth of passenger and freight railroad services in the 2003 year, and it has induced \1,701 billion worth of output, \781 billion worth of value-added, and \580 billion worth of imports of the korean industry as a whole. The energy sector industries such as diesel fuel, thermal power generation, nuclear power generation, crude oil, liquid natural gas, bituminous coal, liquid propane gas have been most affected by the korean railway services. Other industries mainly affected by the korean railway services include railroad car manufacturing, cleaning and decontamination, medical and health service, machinery equipment and rental, construction and maintenance, transportation related services, business R&D, property insurance, and telecommunication.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4496-4502
• /
• 2010

In this paper, for the purpose of improving the future domestic train control systems and securing interoperability according to the global development trends of train control systems, we present the test results of communication interfaces to verify the interoperability between CBTC wayside units tentatively installed in Bundang line that is one of the metropolitan area rail transit systems, and the CBTC onboard units developed through the national R/D project. The CBTC onboard equipment developed, has finished its installation and trial tests in the Bundang shunting yard. For the interoperability test, we should make an interface test with wayside equipment tentatively installed in Bundang line. Due to the safety-critical characteristics of train systems, the site test in the section where the wayside equipment is installed, leads to a danger against safety. Therefore, by way of constructing a simulation environment of train control systems, we confirm the T/R data systems of the equipment for interoperability and test the interoperability by applying these systems to developed CBTC onboard equipment.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.151-156
• /
• 2008

The after 1974 capital region electric railroad is opened to traffic Koraill and Seoul metro adopt each other different power supply method and they operate and they are come. AC 25[kv] method voltage the insulation becomes larger standing distance highly, the case tunnel section which will introduce in the underground segment becomes on a large scale and the cost of construction increases to the city center and the underground segment adoption of DC method was many. To recent times with R-bar (Rigid-bar) introductions change of tunnel section the introduction of AC method came to be easy without in the underground segment. Operates sees in the electric protection where the Seoul metro and the Korail are different each other and, from the dead section segment the interior electric light to put out lights the passenger brings about inconveniently and the civil appeal which demands a power supply method unification occurs, within the company interchange electric railroad brazier safety improvement and maintenance expense curtailment etc. the flaw is original proposal, is a condition which finishes a feasibility study service about the power supply method fringe land. Interchange analysis of the DC electric railway it leads from the present paper and it compares under analyzing being it could be reflected to also the route which is in the process of actual using boil the strong point and a weak point of DC and AC method of the establishment route constructive at the time of and

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.918-920
• /
• 2003

This paper presents the analysis of the permanent magnet overhang effect for permanent magnetic actuator. Generally, The overhang is often used to increase the force density in permanent magnet machineries. The overhang is especially profitable to reduce the volume after increasing the force density per volume when using the overhang effect of the permanent magnet. Therefore, 3D Equivalent Magnetic Circuit Network Method (3D EMCNM) has been used in this paper. According to the plunger position, flux distribution per the overhang length, and the holding force are quantitatively compared. Furthermore, an appropriate length of the overhang has been proposed. To confirm the accuracy of the analysis method, the results of 3D EMCNM and FEM(2D, 3D) are compared for the basic model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1083-1090
• /
• 2009

In 18GHz using unified data transmission in a subway and railway, Influence of the multipath fading is big and an arrival range of the micro wave takes the influence greatly according to the transmit angle and receive angle because it not diffracted. This thesis analyzed microwave property underground tunnel and ground railway at unified data transmission in subway and railway. Antenna gain of directional antenna many used unified transmission in an subway and railway, is used 15dBi and 10dBi in simulation. Transmitter's property is compared underground tunnel to ground railway about curved railway of R=100, R=200, R=400. Specification of transmitter is used sample unified transmission system in subway and railway of KRRI(korea railroad research Institute). Transmitter's power is 20dBm and Reciever's sensitivity is -90dBm. According to result of simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.5
• /
• pp.830-837
• /
• 2015

A study which is to develop the low-cost urban railway system for low-density line such as Gwang-ju subway Line 2 is in progress, and its TCS(Train Control System) is required as an economic system which is able to train operation suitable in low-density line. We have developed the signaling equipment which is configured with automatic block system between stations, and the control center's equipment in order to meet the requirements of TCS mentioned above. In this paper, we propose the control procedure of ATS to be required for train operation management in the low-density line such as Gwang-ju subway Line 2. The control procedure of ATS considered all features such as the requirements analysis for train operation management, the functions of train control system to be applied and the block type. Also, it considered the station(interlocking, passenger, turn-back) type, station control(stop, route, departure, turn-back departure, turn-back) type, and train operation management for exiting and entering depot. The ATS control procedure proposed in this paper has an advantage in the cost and efficiency through unification and optimization of its function. And in cost of operating and maintenance, the ATS system has a feature that can be significantly reduced.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.42-48
• /
• 2003

Korea Railroad Research Institute(KRRI) have been developing Korean Tilting Train eXpress(TTX) with the service speed of 180km/h as the R&D project supporting by Korea government. The core of research is the development of the tilting bogie using the domestic tilting technologies. We developed the 3D-CAD prototype of tiling bogie model. In this paper we attempted to evaluate the structural strength of bogie frame using the Finite Element Method. Finally, we . would like to propose the application of the modifying part to the detail design.