• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2883-2890
• /
• 2013

Correlation power analysis attack takes place at the point of operating a known value and a hidden value from a master key as an input. The hidden value can be found by analyzing a correlation between the result value and the measured power signal during the operation, witch makes it possible to estimate the master key from the hidden value. However, the correlation power analysis attack can be very difficult by changing the conditions that make the power analysis possible, when the known value and the operation is hidden, when it is impossible to estimate the master key from the hidden value, or when the correlation between the result value and the power signal is considerably lowered. Therefore this study proposes a software countermeasure using a secrete intermediate key to witch these conditions are applied.

• Mass Spectrometry Letters
• /
• v.6 no.1
• /
• pp.1-6
• /
• 2015

Direct analysis in real time mass spectrometry (DART-MS) is one of the variants of ambient mass spectrometry. The ionization process of DART-MS is in open environment and only takes few seconds, so it is suitable for fast analysis. Actually, since its introduction in 2005, more and more attentions have been drawn to its various applications due to its excellent properties, e.g., fast analysis, and no or less sample preparation, high salt tolerance and so on. This review summarized the promising features of DART-MS, including its ionization mechanism, equipment modification, wide applications, coupling techniques and extraction strategies before analysis.

• Steel and Composite Structures
• /
• v.16 no.2
• /
• pp.117-133
• /
• 2014

Natural vibration of truss cable structures is analyzed based upon the general structural analysis software ANSYS, energy variational method and Rayleigh method, the calculated results of three methods are compared, from which the characteristics of free-vibration are obtained. Moreover, vertical seismic response analysis of truss cable structures is carried out via time-history method. Introducing three natural earthquake waves calculated the results including time-history curve of vertical maximal displacement, time-history curve of maximal internal force. Variation curve of maximal displacement of node along span, and variation curve of maximal internal force of member along span are presented. The results show the formulas of frequencies for truss cable structures obtained by energy variational method are of high accuracy. Furthermore, the maximal displacement and the maximal internal force occur near the 1/5 span point. These provide convenient and simple design method for practical engineering.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.660-675
• /
• 2020

Since Industry 4.0, there is a growing interest in smart manufacturing across all industries. However, there are few studies on this topic in the garment industry despite the growing interest in implementing smart manufacturing. This paper presents the feasibility and essential considerations for implementing smart manufacturing in the garment industry. A systematic review analysis was conducted. Studies on garment manufacturing and smart manufacturing were searched separately in the Scopus database. Key technologies for each manufacturing were derived by keyword analysis. Studies on key technologies in each manufacturing were selected; in addition, bibliographic analysis and cluster analysis were conducted to understand the progress of technological development in the garment industry. In garment manufacturing, technology studies are rare as well as locally biased. In addition, there are technological gaps compared to other manufacturing. However, smart manufacturing studies are still in their infancy and the direction of garment manufacturing studies are toward smart manufacturing. More studies are needed to apply the key technologies of smart manufacturing to garment manufacturing. In this case, the progress of technology development, the difference in the industrial environment, and the level of implementation should be considered. Human components should be integrated into smart manufacturing systems in a labor-intensive garment manufacturing process.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1715-1720
• /
• 2019

Jozef Stefan Institute (JSI), TRIGA Mark II reactor employs the homogeneous mixture of uranium and zirconium hydride fuel type. Since its upgrade, a series of fresh fuel steady state experimental benchmarks have been conducted. The benchmark results have provided data for testing computational neutronics codes which are important for reactor design and safety analysis. In this work, we investigated the JSI TRIGA Mark II reactor neutronics characteristics: the effective multiplication factor and two safety parameters, namely the control rod worth and the fuel temperature reactivity coefficient using SuperMC. The modeling and real-time cross section generation methods of SuperMC were evaluated in the investigation. The calculation analysis indicated the following: the effective multiplication factor was influenced by the different cross section data libraries; the control rod worth evaluation was better with Monte Carlo codes; the experimental fuel temperature reactivity coefficient was smaller than calculated results due to change in water temperature. All the results were in good agreement with the experimental values. Hence, SuperMC could be used for the designing and benchmarking of other TRIGA Mark II reactors.

• Structural Engineering and Mechanics
• /
• v.57 no.4
• /
• pp.587-602
• /
• 2016

In structural reliability analysis, the response surface method is widely adopted because of its numerical efficiency. It should be understood that the response function must approximate the actual limit state function accurately in the main region influencing failure probability where it is evaluated. However, the size of main region influencing failure probability was not defined clearly in current response surface methods. In this study, the concept of sub-region of interest is constructed, and an improved response surface method is proposed based on the sub-region of interest. The sub-region of interest can clearly define the size of main region influencing failure probability, so that the accuracy of the evaluation of failure probability is increased. Some examples are introduced to demonstrate the efficiency and the accuracy of the proposed method for both numerical and implicit limit state functions.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1269-1289
• /
• 2014

With the sub-stepping technique, the numerical analysis in real-time dynamic hybrid testing is split into the response analysis and signal generation tasks. Two target computers that operate in real-time may be assigned to implement these two tasks, respectively, for fully extending the simulation scale of the numerical substructure. In this case, the integration time-step of solving the dynamic response of the numerical substructure can be dozens of times bigger than the sampling time-step of the controller. The time delay between the real and desired feedback forces becomes more striking, which challenges the well-developed delay compensation methods in real-time dynamic hybrid testing. This paper focuses on displacement prediction and force correction for delay compensation in the real-time dynamic hybrid testing with a large integration time-step. A new displacement prediction scheme is proposed based on recently-developed explicit integration algorithms and compared with several commonly-used prediction procedures. The evaluation of its prediction accuracy is carried out theoretically, numerically and experimentally. Results indicate that the accuracy and effectiveness of the proposed prediction method are of significance.

• Journal of Korean Elementary Science Education
• /
• v.37 no.4
• /
• pp.352-362
• /
• 2018

With the advent of the 4th industrial revolution, the educational innovation focusing on the key competencies is occurring in the whole world. In September 2015, the Ministry of Education suggested six key competencies such as self-management competency, knowledge/information processing competency, creative thinking competency, aesthetic sensibility competency, communication competency, and community competency for the 2015 revised national curriculum. Also, this era requires for diverse lessons like subject integrated/converged lesson and intramural/extramural education. Thus, the objective of this study is to research/analyze exhibitions of Busan National Science Museum as extramural educational institute and to relate between the 2015 revised curriculum and exhibitions of science museum. First, the exhibitions of permanent exhibition hall in Busan National Science Museum were researched/analyzed. It analyzed the current status, display type, and explained contents of exhibitions. Second, it analyzed the relations between contents of the exhibition and key competencies in the 2015 revised curriculum. Third, the 2015 revised curriculum for the 3rd and 6th grade related to the selected exhibition contents was analyzed. The analysis on the exhibition contents performed by this study would be helpful for follow-up researches connected to exhibitions of Busan National Science Museum.

• Review of KIISC
• /
• v.6 no.2
• /
• pp.35-52
• /
• 1996

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.5
• /
• pp.632-637
• /
• 2006

Oviduct-specific glycoprotein 1 (OVGP1) is implicated in playing a role in fertilization and early embryo development. In this study, we have obtained the sequence of intron 9 of OVGP1 gene in swine. Comparative sequencing of Meishan (a native Chinese breed) and Large White pig breeds revealed an A/T substitution at position 943. A PCR-EcoRI-RFLP assay was developed to detect this mutation. Polymorphism analysis in Qingping animals showed that pigs with BB genotype had lower number of piglets born alive (NBA) in multiple parities than pigs with AA (p<0.05) and AB genotype (p<0.01). In Large $White{\times}Meishan$ ($LW{\times}M$) $F_2$ offspring, the weight of both ovaries (OW) of the BB genotype was significantly lighter than that of AB (p = 0.05) and AA (p<0.01) genotypes. Analysis of the data also revealed that the mutation locus affected these two traits mostly by additive effects. These studies indicated that the polymorphism was associated with NBA and OW in two distinct populations and further investigations in more purebreds or crossbreds are needed to confirm these results.