• Earthquakes and Structures
• /
• v.12 no.4
• /
• pp.397-407
• /
• 2017

To estimate the structural seismic demand, some methods are based on an equivalent linear system such as the Capacity Spectrum Method, the N2 method and the Equivalent Linearization method. Another category, widely investigated, is based on displacement correction such as the Displacement Coefficient Method and the Coefficient Method. Its basic concept consists in converting the elastic linear displacement of an equivalent Single Degree of Freedom system (SDOF) into a corresponding inelastic displacement. It relies on adequate modifying or reduction coefficient such as the inelastic deformation ratio which is usually developed for systems with known ductility factors ($C_{\mu}$) and ($C_R$) for known yield-strength reduction factor. The present paper proposes a rational approach which estimates this inelastic deformation ratio for SDOF bilinear systems by rigorous nonlinear analysis. It proposes a new inelastic deformation ratio which unifies and combines both $C_{\mu}$ and $C_R$ effects. It is defined by the ratio between the inelastic and elastic maximum lateral displacement demands. Three options are investigated in order to express the inelastic response spectra in terms of: ductility demand, yield strength reduction factor, and inelastic deformation ratio which depends on the period, the post-to-preyield stiffness ratio, the yield strength and the peak ground acceleration. This new inelastic deformation ratio ($C_{\eta}$) is describes the response spectra and is related to the capacity curve (pushover curve): normalized yield strength coefficient (${\eta}$), post-to-preyield stiffness ratio (${\alpha}$), natural period (T), peak ductility factor (${\mu}$), and the yield strength reduction factor ($R_y$). For illustrative purposes, instantaneous ductility demand and yield strength reduction factor for a SDOF system subject to various recorded motions (El-Centro 1940 (N/S), Boumerdes: Algeria 2003). The method accuracy is investigated and compared to classical formulations, for various hysteretic models and values of the normalized yield strength coefficient (${\eta}$), post-to-preyield stiffness ratio (${\alpha}$), and natural period (T). Though the ductility demand and yield strength reduction factor differ greatly for some given T and ${\eta}$ ranges, they remain take close when ${\eta}>1$, whereas they are equal to 1 for periods $T{\geq}1s$.

• Journal of Korea Water Resources Association
• /
• v.44 no.4
• /
• pp.305-314
• /
• 2011

Imnam Dam construction and inter-basin water transfer use by North Korea have caused several problems including water resources management aspects in the downstream reach of North Han River. Therefore, cooperative works between North and South Korea are required to make a reasonable management situation of the shared river for water quantity and quality. However, efforts by the North and the South has done not enough to achieve equitable water use in the shared river. This study analyzes main impacts caused by Imnam Dam in key sectors for reviewing water use right regarded as the most important decision-making criterion in international rivers. As the results, water deficit by Imnam Dam is calculated at 379 million $m^3$/year when river drought year for water assessment is set in 1978 in the Han River basin. Additionally hydropower production is decreased by 234 GWh/year in exclusive hydropower generation dams. In respective of water quality, BOD concentration is increased by 0.065 ppm at Sambongli in North Han River. Finally it is identified that unequitable water use based on the absolute territorial sovereignty by North Korea in North Han River has directly and indirectly affected severe impacts to South Korea as the downstream user.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.313-322
• /
• 2006

Among many modelling factors which consist of a screen, a form brings a child's psychological response, according to its being drawn and expressed shape, and would be defined as a visual descriptive method which transmits the relation between the subject and background by a story content and the circumstance and emotion of characters in the story. In this study, to analyze how an expressed form on a screen works to a child visually and psychologically, I, first have examined how differently a child's perception development and its experience to the form is come out by the age of a child, and have found that it influences on a child's originality and creativity development, visual and psychological thinking development, and the stimulation on dream and imagination. And I have examined each characteristic by discriminating the expressive style of the form into a reproductive, a simplified, an exaggerated and a distorted form expression, and by utilizing it as substantiative data through the 1st and 2nd stage, have analyzed responses and preferences according to a style of a child's expression form. In conclusion, I have considered that the analysis result through the substantiative study would be a help not only to the form expression which is based on an illustrator's personality and creativity, and also would be utilized in the effective expression method study and experiment of students who learns the illustration.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.69-84
• /
• 2017

In order to display various art works such as media art in a multi-display environment, it is necessary to consider contents arrangement. The advantage of having a 1: N or N: N layout instead of a 1: 1 or N: 1 layout between display and content, but a more complex scheme of how to do spatial and temporal layout in multi-display Is required. In order to distribute contents, existing media server solution or programming-based multimedia production software is used. However, it takes much time to rearrange or modify the contents, and it is not easy to modify the contents. Therefore, It is difficult to place content in the environment. In order to solve this problem, various approaches are needed from research on content placement method to development of content placement software that improves the existing method. However, analysis on systematic content placement type supporting it, or interface There is also no access to. In this study, we have summarized the requirements for designing the interface for each type with the aim of making it possible to utilize previously analyzed content layout types in various display activities such as media art in multi - display environment. The requirements of each type of interface were derived based on spatial arrangement and temporal layout type which are most distinguished when content is placed. The contents of the interface requirements are summarized as follows: We expect to be a cornerstone for system development.

• Journal of radiological science and technology
• /
• v.34 no.4
• /
• pp.351-357
• /
• 2011

The $^{18}F$-FDG is one of the widely used isotopes for PET/CT scans. Dose amount injected to the patient depends on the characteristics of PET/CT systems. Obviously, the technologists who contact with patients would be exposed as well. In this study, we evaluated the exposed dose of the technologist who works on the PET/CT scanner. The exposed dose were measured every month with the TLDs from 6 technologists. Each technologist is shift-worker who manages 3 different PET/CT systems(Scanner 1(S1): 0.15 mCi/kg, Scanner 2(S2): 0.17 mCi/kg, Scanner 3(S3): 0.12 mCi/kg). The average exposed doses of technologists for each PET/CT system were measured as 0.76 mSv for S1, 0.93 mSv for S2 and 0.47 mSv for S3. The maximum dose was 1.12 mSv and minimum was 0.42 mSv. The results showed that there was a correlation between exposed dose and PET/CT system(p<0.005). Less injected dose for patient occurs less exposed dose for technologist. Various studies for the low dose PET/CT system are required for not only the patient but also the technologist.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.256-261
• /
• 2008

The curtain-wall work has been more frequently applied in the construction industry since demand of high-rise buildings has been increased. The curtain-wall work is usually performed with the frame work simultaneously for reducing construction period, but it might be delayed because of several problems caused by interference of process. However, there is not an appropriate tool which can be used by a work manager for adjusting quantity of the construction equipments or the workers when the curtain-wall work was delayed. To resolve this problem a construction simulation anticipating and analyzing potential problems before starting the work can be applied in the curtain wall work. This research suggests a general model for the curtain-wall work by using construction simulation and produces a combination of construction equipments and workers which can estimate optimum work productivity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.499-505
• /
• 2012

As the excavation depths during excavation works in urban sites are getting deeper and bigger, It is necessary to study for the improvements to solve the problems in the excavation processes. This research deals with the excavation method that can not only minimize the effect on the surrounding constructions, but also shorten the construction period of the excavation work. For this research, there have been an extensive literature review of the bibliographic data about Slurry Wall Method, which is recognized around the world, and the analysis of the major problems in the existing ineffective construction step. These efforts led to the technical improvements. Accordingly, a new construction method applied with the new technical factors has been suggested, and it was possible to compare Slurry Wall Method with the construction method and analyze them on the base of the examples using the suggested method. This new method decreased the excavation period by 15 days. It took only 33days to finish the excavation work, as compared to 48 days that can be seen on the pre-modification schedule. Furthermore, the suggested method in this research is safer, more economically feasible, and better for the environment than Slurry Wall Method. It will contribute to shortening the construction period of Slurry Wall Method in the end.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.167-187
• /
• 2014

Animation-related films and game industries have been expanding their markets rapidly responding to sharply increasing public demand. The production processes of major studios are getting more and more specialized and detailed. Therefore, they feel burden to manage and maintain as the HR and physical sizes are getting greater. So, independent studios which perform partial processes of the works are increasing over North America and Europe. Specialized studios build previous functions and related business models. They are expanding their areas. Therefore, this study targeted studios specialized in digital concept art in free production step. The characteristics of such studios were analyzed. To this end, first definitions of digital concept art concepts and functional & artistic features of entire production, and their application to business were deliberated through documents and online. Based on the results, the features of 'concept art service', 'self-brand business/ communication', and 'education service' were drawn. Second, based on it, targeting three con cept art studios such as Atomhawk (UK), FengZhu Design (Singapore), and Studio Gage (Korea), case research was done. Comparative analysis for the cases was conducted. It turned out that concept art studio s lead new market demand through active business strategies such as related contents development, marketing, etc. based on specialization. This research is significant to understand global trend of newly establishing specialized studios market and suggest reference data to improve prospective domestic specialized studios competitiveness.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.621-626
• /
• 2006

Today's commercial high resolution satellite imagery such as IKONOS and QuickBird, offers the potential to extract useful spatial information for geographical database construction and GIS applications. Extraction of 3D building information from high resolution satellite imagery is one of the most active research topics. There have been many previous works to extract 3D information based on stereo analysis, including sensor modelling. Practically, it is not easy to obtain stereo high resolution satellite images. On single image performance, most studies applied the roof-bottom points or shadow length extracted manually to sensor models with DEM. It is not suitable to apply these algorithms for dense buildings. We aim to extract 3D building information from a single satellite image in a simple and practical way. To measure as many buildings as possible, in this paper, we suggested a new way to extract building height by triangular vector structure that consists of a building bottom point, its corresponding roof point and a shadow end point. The proposed method could increase the number of measurable building, and decrease the digitizing error and the computation efficiency.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.107-118
• /
• 2021

One of the debates regarding the college admission systems is about which admissions screening works as a mechanism for social mobility, between early and regular admissions. This study attempted to contribute to related discussions by analyzing the income level of college admissions students according to the admissions screening (early vs. regular admissions) using data from the third year survey of the Korean Education & Employment Panel II (KEEP II). Analyzing the dataset, we found that parental income was almost the same between students admitted from early and regular admissions. To be specific, average monthly parental income was 586.4 million Korean Won for students admitted from early admission while it was 585.4 million Korean Won for those admitted from regular admission, which means that the difference between the two was neither practically nor statistically significant. Applying the chi-square test, we tested whether the relationship between parental income and types of college admissions and found no statistical significance. Finally, categorizing colleges where students are admitted by ranking, we compared parental incomes among students. We found that parental income was higher for top-ranked universities, and that parental income was higher for students admitted from early admission. We concluded that early admission can possibly be an admission system for "well-offs" between the two, and that early admission may not be working as a pathway to facilitate social mobility compared to the regular admissions.