• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.64-71
• /
• 2002

A new model utilizing a transfer function was proposed in the previous paper fur analizing motion errors of hydrostatic tables. Validity of the proposed method was theoretically verified as the calculated motion errors were compared with the results by conventional multi pad method. In this paper, relationship between form error of rail and motion errors of hydrostatic table is analized theoretically in order to comprehand so-called ‘averaging effect of oil film’. Experiments on the motion errors of hydrostatic table is conducted with 3 different rails, and the results are compared with the results calculated by Transfer Function Method. The results show good agreement. From the results, it is verified that TFM is very effective to analize the motion errors of hydrostatic table.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.454-458
• /
• 2001

A new model utilizing a transfer function was proposed in the previous paper for analizing motion errors of hydrostatic tables. Validity of the proposed method was theoretically verified as the calculated motion errors were compared with the results by conventional multi pad method. In this paper, relationship between form error of rail and motion errors of hydrostatic table is analized theoretically in order to comprehand so-called 'averaging effect of oil film'. Experiments on the motion errors of hydrostatic table is conducted with 3 different rails, and the results are compared with the results calculated by Transfer Function Method. The results show good agreement. From the results, it is verified that TFM is very effective to analize the motion errors of hydrostatic table.

• 한국교육논총
• /
• 제40권1호
• /
• pp.59-79
• /
• 2019

본 연구의 목적은 중국인 한국어 학습자들의 글쓰기 자료에 나타난 띄어쓰기 오류를 분석하고, 설문조사와 인터뷰 내용을 통해 오류 원인을 분석하여 중국인 학습자를 위한 띄어쓰기 교육 지도 방향을 제시하는 데 있다. 이를 위해 중국인 유학생의 글쓰기 자료 30편을 분석하였으며, 설문조사와 아울러 인터뷰를 실시하였다. 학습자들의 글쓰기 자료를 분석한 결과 총 148회 띄어쓰기 오류가 발견되었으며, 띄어 써야 하는데 붙여 쓴 오류(77.6%)는 붙여 써야 하는데 띄어 쓴 오류(22.4%)보다 훨씬 더 많이 나타났다. 붙여 쓴 오류 중 '명사+명사', '관형사(형)+의존명사'와 띄어 쓴 오류 중 '조사'의 오류 빈도수가 높게 나타났다. 이에 본고는 명사와 조사를 대상으로 연역적 측면과 귀납적 측면을 출발하여 띄어쓰기 지도 방향을 제시했다.

• 대한인간공학회지
• /
• 제13권2호
• /
• pp.33-41
• /
• 1994

The paper presents a new scheme and a support system for the analysis sof hyman errors in nuclear power plants based on a cognitive model. We discusse the problems identified in current managerial analysis, and propose a new approach that frames the description of human activities according to a human decision making modle, so that it could provide a better reconstruction of a sequence of event suspected of involving human errors. This sophistcated approach becomes practical for the field application with the support of a computerized aiding system. The model-based event re-construction method is expected to enable the analysts to produce more informative reports, which in turn heop to derive appropriate counter- measures to reduce the possibility of the analyzed human errors.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.172-181
• /
• 1999

The objective of this research is to develop a measurement error model for sculptured surfaces in On-Machine Measurement (OMM) process based on a closed-loop configuration. The geometric error model of each axis of a vertical CNC Machining center is derived using a 4${\times}$4 homogeneous transformation matrix. The ideal locations of a touch-type probe for the scupltured surface measurement are calculated from the parametric surface representation and X-, Y- directional geometric errors of the machine. Also, the actual coordinates of the probe are calculated by considering the pre-travel variation of a probe and Z-directional geometric errors. Then, the step-by-step measurement error analysis method is suggested based on a closed-loop configuration of the machining center including workpiece and probe errors. The simulation study shows the simplicity and effectiveness of the proposed error modeling strategy.

• Structural Engineering and Mechanics
• /
• 제76권4호
• /
• pp.505-512
• /
• 2020

This paper presents an error estimation technique for 2-D crack analysis by an enriched natural element (more exactly, enriched Petrov-Galerkin NEM). A bare solution was approximated by PG-NEM using Laplace interpolation functions. Meanwhile, an accurate quasi-exact solution was obtained by a combined use of enriched PG-NEM and the global patch recovery. The Laplace interpolation functions are enriched with the near-tip singular fields, and the approximate solution obtained by enriched PG-NEM was enhanced by the global patch recovery. The quantitative error amount is measured in terms of the energy norm, and the accuracy (i.e., the effective index) of the proposed method was evaluated using the errors which obtained by FEM using a very fine mesh. The error distribution was investigated by calculating the local element-wise errors, from which it has been found that the relative high errors occurs in the vicinity of crack tip. The differences between the enriched and non-enriched PG-NEMs have been investigated from the effective index, the error distribution, and the convergence rate. From the comparison, it has been justified that the enriched PG-NEM provides much more accurate error information than the non-enriched PG-NEM.

• 제어로봇시스템학회논문지
• /
• 제20권4호
• /
• pp.443-448
• /
• 2014

Soft errors in memory devices that caused by radiation are the main threat from a reliability point of view. This threat can be commonly overcome with the combination of SEC (Single-Error Correction) codes and scrubbing technique. The interleaving architecture can give memory devices the ability of tolerating these soft errors, especially against multiple-bit soft errors. And the interleaving distance plays a key role in building the tolerance against multiple-bit soft errors. This paper proposes a reliability model of an interleaved memory device which suffers from multiple-bit soft errors and are protected by a combination of SEC code and scrubbing. The proposed model shows how the interleaving distance works to improve the reliability and can be used to make a decision in determining optimal scrubbing technique to meet the demands in reliability.

• Korean Journal of Mathematics
• /
• 제22권1호
• /
• pp.169-180
• /
• 2014

In this study, we consider the informal and formal definition of limit on the basis of middle and high school curriculum, and then analyze the reason of difficulties experienced when sophomores learn the formal definition(${\epsilon}-{\delta}$ procedure) of limit. We conducted teaching of the formal definition of limit with sophomores and analyzed their errors which were appeared when they applied to limits problems. In addition, we try to improve the understanding of ${\epsilon}-{\delta}$ procedure of the limit taught in analysis.

• 소음진동
• /
• 제6권5호
• /
• pp.595-605
• /
• 1996

If the control force designed on the basis of the mathematical model with parameter errors is applied to control the actual system, the closed-loop performance of the actual system will be degraded depending on the degree of the errors, In this study, the effect of parameter errors on the robustness of several natural controls has been analyzed and compared. Every asymptoic stability condition for the natural controls has been derived using Lyapunov approach, and the characteristics of the stability conditions has also been compared. The extent of deviation of the closed-loop performance from the designed one for the natural controls is derived using operator techniques, and evaluated by numerical method. It has been found that the optimal control, acceleration feedback control, and acceleration-position feedback control among the considered natural controls would be robust one with respect to the parameter errors.

• 말소리와 음성과학
• /
• 제13권1호
• /
• pp.17-24
• /
• 2021

In this study, listening errors by Korean EFL learners are comprehensively analyzed from self-paced passage dictation tasks. Fifty-five Korean EFL learners participated in the study. Listeners were asked to write down dictation passages as accurately as possible, while listening to the audio as much as they needed. The results show that (i) low-proficiency learners tend to misperceive longer phrases than high-proficiency learners, (ii) function words are more often omitted or misheard than content words, and (iii) low-proficiency learners have more difficulties with content words than high-proficiency learners do. Most frequent suffix errors were omissions of past or plural suffixes. Among the function words, the most frequent errors were found with auxiliary contractions, infinitive marker to, and articles, mostly in the environment of linking and elision. It is also shown that C-V linking, C-C linking, and elision are the primary sources for the most frequent errors. C-V linking led to errors in correctly locating the word boundary, while C-C linking and elision resulted in omission. These errors show that Korean EFL listeners have difficulties in detecting fine-grained phonetic details to the extent that native speakers can do.