• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.29-44
• /
• 2023

From a sustainability perspective, the characteristics of upcycling fashion design by Marine Serre were analysed to understand upcycling fashion design, which can be an important way to follow sustainability values in the fashion industry, and to provide solutions for moving towards sustainable fashion. In order to derive the characteristics of upcycling fashion design from a sustainability perspective, the values of sustainable designs and the characteristics of the upcycling design were derived though the analysis of Marine Serre's seasonal collections from the 2018 F/W season to the recent 2022 F/W season. The research results are summarized as follows. First, the value of sustainable fashion design could be classified into environmental, economic, social, and cultural values. Second, Marine Serre's upcycling fashion design was driven by the characteristics of sustainable upcycling fashion design, such as environmentality, originality, variability, economy, handicraft, time, and availability. Third, Marine Serre's upcycling fashion design contained all environmental, economic, social, and cultural sustainability values. From a sustainability perspective, Marine Serre's upcycling fashion design can be said to be an upcycling fashion design with convergent values that encompasses all of the sustainability core values of environmental, economic, social, and cultural aspects.

• The Korean Journal of Community Living Science
• /
• v.26 no.3
• /
• pp.471-488
• /
• 2015

This study compares marital satisfaction between male and female rural migrants and explores the effects of characteristics of rural migrants and family values on marital satisfaction. Data were collected using a structured questionnaire. The survey included 483 migrants living in rural communities of North Jeolla Province and South Jeolla Province. Data were analyzed using descriptive statistics, cross tables, the t-test, correlations, and a hierarchical regression analysis using SPSS 21.0. According to the results, marital satisfaction was higher in men than in women. In addition, the effects of characteristics of rural migrants and family values on marital satisfaction were greater in men than in women. The major determinant of marital satisfaction in men was economical preparation, whereas that in women was family values. Economical preparation for rural living was more important for men, and the sufficient understanding and internalization of rural living was more important for women. In particular, family values represented the main variable between men and women in terms of marital satisfaction. These results suggest that family relationships may be the most important factor influencing rural migrants' marital satisfaction and that spousal relationships may be the core factor influencing family relationships.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.415-425
• /
• 2005

Statement of problem : Fracture of composite resin core will be occulted by progress of crack. Bonding interface of different materials has large possibility of starting point of crack line. Therefore, the bond strength of glass fiber post to composite resin core is important for prevention of fracture. Purpose: This in vitro study tried to find out how to get the higher strength of glass fiber post to composite resin core through surveying the maximum load that fractures the post and cote complex. Materials and methods: 40 specimens made with glass fiber Posts(Style $post^{(R)}$, Metalor, Swiss) and composite resin core ($Z-100^{(R)}$, 3M, USA) were prepared and loaded to failure with push-out type shear-bond strength test in a universal test machine. The maximum fracture load and fracture mode were investigated in the specimens that were restored with four different surface treatments. With the data. ANOVA test was used to validate the significance between the test groups, and Bonferroni method was used to check if there is any significant statistical difference between each test group. Evely analysis was approved with 95% reliance. Results: On measuring the maximum fracture load of specimens, both the treatments of sandblasted and acid-etched one statistically showed the strength increase rather than the control group (p<0.005). The scanning electric microscope revealed that sand blasting made more micro-retention form not only on the resin matrix but on the glass fiber, and acid-etching contributed to increase in surface retention form, eliminated the inorganic particles in resin matrix. Specimen fracture modes investigation represented that sand blasted groups showed lower bonding failure than no-sand blasted groups. Conclusion: Referring to the values of maximum fracture load of specimens, the bonding strength was increased by sand blasting and acid-etching.

• The korean journal of orthodontics
• /
• v.41 no.6
• /
• pp.447-453
• /
• 2011

Objective: We compared the shear bond strength (SBS) of lingual retainers bonded to bovine enamel with three different resins using direct and indirect methods. Methods: Both ends of pre-fabricated twisted ligature wires were bonded to bovine enamel surfaces using Light-Core, Tetric N-Flow, or Transbond XT. Phosphoric acid-etched enamel surfaces were primed with One-Step prior to bonding with Light-Core or Tetric N-Flow. Transbond XT primer was used prior to bonding with Transbond XT. After 24 hours in water at $37^{\circ}C$, we performed SBS tests on the samples. We also assigned adhesive remnant index (ARI) scores after debonding and predicted the clinical performance of materials and bonding techniques from Weibull analyses. Results: Direct bonding produced significantly higher SBS values than indirect bonding for all materials. The SBS for Light-Core was significantly higher than that for Tetric N-Flow, and there was no significant difference between the direct bonding SBS of Transbond XT and that of Light-Core. Weibull analysis indicated Light-Core performed better than other indirectly bonded resins. Conclusions: When the SBS of a wire retainer is of primary concern, direct bonding methods are superior to indirect bonding methods. Light-Core may perform better than Transbond XT or Tetric N-Flow when bonded indirectly.

• Nuclear Engineering and Technology
• /
• v.49 no.1
• /
• pp.1-5
• /
• 2017

The heavy water zero power reactor (HWZPR), which is a critical assembly with a maximum power of 100 W, can be used in different lattice pitches. The last change of core configuration was from a lattice pitch of 18-20 cm. Based on regulations, prior to the first operation of the reactor, a new core was simulated with MCNP (Monte Carlo N-Particle)-4C and WIMS (Winfrith Improved Multigroup Scheme)-CITATON codes. To investigate the criticality of this core, the effective multiplication factor ($K_{eff}$) versus heavy water level, and the critical water level were calculated. Then, for safety considerations, the reactivity worth of $D_2O$, the reactivity worth of safety and control rods, and temperature reactivity coefficients for the fuel and the moderator, were calculated. The results show that the relevant criteria in the safety analysis report were satisfied in the new core. Therefore, with the permission of the reactor safety committee, the first criticality operation was conducted, and important physical parameters were measured experimentally. The results were compared with the corresponding values in the original core.

• Journal of dental hygiene science
• /
• v.12 no.2
• /
• pp.123-129
• /
• 2012

The aim of study was to compare the color parameters and mean color difference of porcelain specimens by different veneering technique in order to examine the effect of veneering technique on esthetics of yttria-stabilized tetragonal zirconia polycrystalline(Y-TZP) all ceramic restoration. Three groups of square-shaped core ceramic specimens(14mm in diameter and 0.3, 0.5, 0.7 mm) and two groups of veneering ceramic specimen were prepared for analysis. Color parameter($L^*,a^*,b^*$) and color difference of zirconia core squares and core-veneer specimens were measured with ShadeEye $NCC^{(R)}$ spectrophotometer, respectively. Mean color difference(${\Delta}E^*$)were calculated using color difference formula. Two-way analysis of variance(ANOVA) combined with a Tukey multiple-range test were used to analysis the data(${\alpha}=0.05$). ${\Delta}E^*$ values were not significantly affected by core thickness and veneering porcelain(p=0.083). The color differences(${\Delta}E^*$) of core-veneer specimens with 0.5, 0.7 mm-A1,A2,A3.5 shade were mostly below 3.7 which was within the clinically acceptable range, while color differences between 0.3 mm-A1,A2 showed more than 3.7. All-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• Nuclear Engineering and Technology
• /
• v.10 no.4
• /
• pp.203-213
• /
• 1978

A combination of computer codes such as LATREP, HWR, AXAV and CITATION is utilized in an attempt to analyze the nuclear design characteristics of the CANDU-PHWR of the Wolsung Unit 1. The major nuclear properties to be computed are tile lattice properties of CANDU fuel channel and the core channel power distribution. The computed results are compared with the PSR documentation for the Wolsung reactor. The observed discrepancies between our computation and the PSB values are discussed in terms of incomplete information on the description of the core configuration in the PSR and the different calculation methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5901-5908
• /
• 2012

The purpose of this study was to identify construct validity and reliability of instrument for professionalism in physical therapy using developed by American Physical Therapy Association for 470 physical therapists. The corrected data was analysed using confirmatory factor analysis and internal consistency. Model of professionalism was adequate (p<.05) and consisted of 7 factors. Standardized coefficients of construct factor were followed by the integrity (${\beta}$=.93), professional duty (${\beta}$=.92), and compassion/caring (${\beta}$=.86). There were significant difference in professionalism by career(p<.05) but not significant difference by sex(p>.05). Also, the internal consistency for sub-factor of professionalism demonstrated adequate reliability of the measure (Cronbach ${\alpha}$=.80~.96). Because instrument for professionalism in physical therapy have a validity and reliability, it is useful for measuring professionalism in physical therapists.

• Journal of Korean Society for Quality Management
• /
• v.39 no.2
• /
• pp.337-348
• /
• 2011

To implement total quality management(TQM), firms and institutions have strategically used quality awards models. In this paper we analyzed the national quality awards of G-20 members such as United States, Europe, Japan, Canada, Australia and Korea. There are three main points to analysis; First, "which type of model is good for Korea?", even though Korea already has adopted MBNQA model. Second, "Are the core values really different from each models?". And third, "Is there any difference in the criteria structure and value points system?" This study aims to design a National Quality Award which is good for the Korean companies and organizations. After analyzing the current quality awards models, we propose some suggestion about core value setting Korean-specific criteria development and value points system change.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.1008-1012
• /
• 2012

Injection molds are fabricated by assembling a number of plates in which mold core and cavity components are inserted. The assembled structure causes a number of contact interfaces between each component where the heat transfer is affected by the thermal contact resistance. However, the mold assembly has been treated as a one body in numerical analyses of injection molding, which has a limitation in predicting the mold temperature distribution during the molding cycle. In this study, a numerical approach that considers the thermal contact effect is proposed to predict the heat transfer characteristics of an injection mold assembly. To find the thermal contact conductance between the mold core and plate, a number of finite element (FE) simulations were performed with the design of experiment (DOE) and statistical analysis. Thus, the heat transfer analyses using the obtained conductance values can provide more reliable results than conventional one-body simulations.