• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.4
• /
• pp.452-458
• /
• 1999

Objectives: The authors conducted the study to evaluate bias when potentially diseased subjects were included in cohort members while analyzing risk factors of chronic liver diseases. Methods: Total of 14,529 subjects were followed up for the incidence of liver diseases from January 1993 to June 1997. We have used databases of insurance company with medical records, cancer registry, and death certificate data to identify 102 incident cases. The cohort members were classified into potentially diseased group(n=2,217) when they were HBsAg positive, serum GPT levels higher than 40 units, or had or has liver diseases in baseline surveys. Cox's model were used for potentially diseased group, other members, and total subjects, respectively. Results: The risk factors profiles were similar for total and potentially diseased subjects: HBsAg positivity, history of acute liver disease, and recent quittance of smoking or drinking increased the risk. while intake of pork and coffee decreased it. For the potentially diseased, obesity showed marginally significant protective effect. Analysis of subjects excluding the potentially diseased showed distinct profiles: obesity increased the risk, while quitting smoking or drinking had no association. For these intake of raw liver or processed fish or soybean paste stew increased risk; HBsAg positivity, higher levels of liver enzymes and history of acute liver diseases increased the risk. Conclusions: The results suggested the potential bias in risk ratio estimates when potentially diseased subjects were included in cohort study on chronic liver diseases, especially for lifestyles possibly modified after disease onset. The analytic strategy excluding potentially diseased subjects was considered appropriate for identifying risk factors for chronic liver diseases.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.123-135
• /
• 2013

The reflectance observed in the visible channels of a geostationary meteorological satellite can be used to calculate the amount of cloud by comparing the reflectance with the observed solar radiation data at the ground. Using this, the solar radiation arriving at the surface can be estimated. This study used the Meteorological Imager (MI) reflectance observed at a wavelength of 675 nm and the Geostationary Ocean Color Imager (GOCI) reflectance observed at similar wavelengths of 660 and 680 nm. Cloudy days during a typhoon and sunny days with little cloud cover were compared using observation data from the geostationary satellite. Pixels that had more than 40% reflectance in the satellite images showed less than 0.3 of the cloud index and blocked more than 70% of the solar energy. Pixels that showed less than 15% reflectance showed more than 0.9 of the cloud index and let through more than 90% of the solar energy to the surface. The calculated daily accumulated solar radiation was compared with the observed daily accumulated solar radiation in 22 observatories of the Korean Meteorological Administration. The values calculated for the COMS and MTSAT MI sensors were smaller than the observation and showed low correlations of 0.94 and 0.93, respectively, which were smaller than the 0.96 correlation coefficient calculated for the GOCI sensor. The RMSEs of MTSAT, COMS MI and GOCI calculation results showed 2.21, 2.09, 2.02 MJ/$m^2$ in order. Comparison of the calculated daily accumulated results from the GOCI sensor with the observed data on the ground gave correlations and RMSEs for cloudy and sunny days of 0.96 and 0.86, and 1.82 MJ/$m^2$ and 2.27 MJ/$m^2$, respectively, indicating a slightly higher correlation for cloudy days. Compared to the meteorological imager, the geostationary ocean color imager in the COMS satellite has limited observation time and observation is not continuous. However, it has the advantage of providing high resolution so that it too can be useful for solar energy analysis.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.179-195
• /
• 2002

The purpose of this research is to provide a proper model by analyzing the sports biomechanical of physical movements on the basis of the two patterns(open-stance and cross-stance) at the ready-to-start pose. The subjects for this study are composed of five male handball players from P university and five female shooting players from S university. Three-way moving actions at start(right, left, and forward) are recorded with two high-speed video cameras and measured with two Force platforms and a EMG system. Three-dimensional action analyzer, GRF system, and Whole body reaction movement system are used to figure out the moving mechanisms at the start pose. The analytic results of the moving mechanism at the start pose were as follows. 1. Through examining the three-way moving actions at start, I have found the cross-stance pose is better for the moving speed of body weight balance than the open-stance one. 175 degree of knee joint angle at "take-off" and 172 degree of hip joint angle were best for the start pose. 2. The Support time and GRF data shows that the quickest center of gravity shift was occurred when cross-stanced male subjects started to move toward his lefthand side. The quickest male's average supporting time of left and right foot is 0.19${\pm}$0.07 sec., 0.26${\pm}$0.06sec. respectively. The supporting time difference between two feet is 0.07sec. 3. Through analyzing GRF of moving actions at start pose, I have concluded that more than 1550N are overloaded on one foot at the open-stance start, and the overloaded force may cause physical injury. However, at the cross-stance pose, The GRF are properly dispersed on both feet, and maximum 1350N are loaded on one foot.

• Journal of Technology Innovation
• /
• v.19 no.1
• /
• pp.111-144
• /
• 2011

This study is to confirm the core factors of innovative capabilities and technological entrepreneurship affecting the performance of technology management and business management of small and medium-sized enterprises (SMEs). Through the consideration about the complex natures of technological innovation affecting by multidimensional factors, this study designs the research model that innovative capabilities, the performances of technology and business management are arranged in accordance with the innovation process; input-output-outcome. To meet this research purpose, the hypothesis are set up based on the previous research studies and the research samples are selected from members of the Innovative Business (INNO-BIZ) Association, located in Seoul and Geyonggi province. As a result of regression analysis to the responses gathered from 360 firms, the performance of business management is influenced positively by the technology superiority, market growth and business profitability which are the dominant factors of performance of technology management. In addition, three sub-variables of innovative capabilities such as R&D, strategic planning and learning capability, have positive effects on both the managerial performances. Innovativeness and progressiveness of technological entrepreneurship affect both the performances positively. Moreover, the co-relation between technological entrepreneurship of an innovation leader and innovative capabilities of organizational members are identified. Lastly, technological entrepreneurship has the mediating effect on the path of leading innovative capabilities to the managerial performances. In conclusion, the research results imply that technological innovation-type firms should periodically evaluate the performance of technology management which are the output of technological innovations and the reinvestment for ultimate business success. And improving and developing innovative capabilities and technological entrepreneurship is required to continuously and consistently investing and supporting resources on technological innovations at the firm-and government-level. It is considered that these are the crucial methods for securing the technologically competitive advantage of SMEs with less resources and narrow innovation range.

• Journal of Technology Innovation
• /
• v.22 no.1
• /
• pp.149-175
• /
• 2014

This study analyzed the effect of corporate innovation strategies on patent production and ultimately on technological change and new product development of firms in South Korea. The intent was to derive efficient strategies for enhancing technological performance of the firms. For the empirical analysis, three sources of data were combined: four waves of the Human Capital Corporate Panel Survey (HCCP) data collected by the Korea Research Institute for Vocational Education and Training (KRIVET), corporate financial data obtained from the Korea Information Service (KIS), and corporate patent data provided by the Korean Intellectual Property Office (KIPO). The patent production function was estimated by zero-inflated negative binomial (ZINB) regression. The technological performance function was estimated by two-stage regression, taking into account the endogeneity of patent production. An ordered logit model was applied for the second stage regression. Empirical results confirmed the critical role of corporate innovation strategies in patent production and in facilitating technological change and new product development of the firms. In patent production, the firms' R&D investment and human resources were key determinants. Higher R&D intensity led to more patents, yet with decreasing marginal productivity. A larger stock of registered patents also led to a larger flow of new patent production. Firms were more prolific in patent production when they had high-quality personnel, intensely investing in human resource development, and adopting market-leading or fast-follower strategy as compared to stability strategy. In technological performance, the firms' human resources played a key role in accelerating technological change and new product development. R&D intensity expedited new product development of the firm. Firms adopting market-leading or fast-follower strategy were at an advantage than those with stability strategy in technological performance. Firms prolific in patent production were also advanced in terms of technological change and new product development. However, the nexus between patent production and technological performance measures was substantially reduced when controlling for the endogeneity of patent production. These results suggest that firms need to strengthen the linkage between patent production and technological performance, and take strategies that address each firm's capacities and needs.

• Journal of Chest Surgery
• /
• v.36 no.10
• /
• pp.711-720
• /
• 2003

Bakground : Complete resection by the surgery has been selected as the treatment of choice in lung cancer patients, but in cases of recurrence after excision or inoperable cases, the importance of anticancer chemotherapy has been emphasized. If one can select a set of the sensitive chemotherapeutic agents before anticancer chemotherapy, it will give more favourable results. Subrenal capsular assay has been recognized as a useful in-vivo chemosensitivity test of thoracic and abdominal tumors and it can be done in a short time for a rapid interpretation of tumor responsiveness to anticancer chemotherapeutic drugs. It has been reported that various kinds of cancer cells can be implantable to the kidney, but so far there is no comparative study of xenogeneic cell implantation on liver, spleen and kidney. The author implanted the human lung cancer cells under the capsule of S.D rat's liver, spleen and kidney respectively and compared the pattern of growth and histology. Material and Method: After incubation of human lung cancer cell line (SW-900 G IV) in RPMI 1640 (Leibovitz L-15 medium) culture media, 3${\times}$3${\times}$3 mm size fibrin clots which contain 108 cancer cells were made. Thereafter the fibrin clots were implanted at subcapsule area of liver, spleen and kidney of S.D. female rat. For immune suppression, cyclosporin-A (80 mg/Kg) was injected subcutaneously daily from post-implantation first day to sixth day. The body weight was measured at pre and post implantation periods. The growth pattern and the size of tumor mass were observed and the pathologic examination and serum tumor marker tests were performed. Result: Body weight increased in both of control and experimental groups. Serum Cyfra 21-1 was not detected. Serum levels of CEA and NSE revealed no significant change. The SCC-Ag increased significantly in implanted group. The growth rate of human lung cancer cells which was implanted on spleen was higher than on liver or kidney. The surface area, thickness, and volume of tumor mass were predominant at spleen. The success rates of implantation were 80% on kidney, 76.7% on spleen and 43.3% on liver. Pathologic examination of implanted tumors showed characteristic findings according to different organs. Tumors that were implanted on kidney grew in a round shape, small and regular pattern. In the spleen, tumors grew well and microscopic neovascularization and tumor thrombi were also found, but the growth pattern was irregular representing frequent daughter mass. Human lung cancer cells that were implanted in the liver, invaded to the liver parenchyme, and had low success rate of implantation. Microscopically, coagulation necrosis and myxoid fibrous lesion were observed. Conclusion: The success rate of implantation was highest in the kidney. And the mass revealed regular growth that could be measured easily. The SCC-Ag was presented earlier than CEA or Cyfra21-1. The Cyfra21-1 was not detected at early time after implantation. The best model for tumor implantation experiment for chemosensitivity test was subrenal capsular analysis than liver and spleen and the useful serum tumor marker in early period of implantation was the SCC-Ag.

• Korean Journal of Microbiology
• /
• v.47 no.1
• /
• pp.92-96
• /
• 2011

Rhodococcus sp. strain DK17 possesses three megaplasmids (380 kb pDK1, 330 kb pDK2, and 750 kb pDK3). The alkylbenzene-degrading genes (akbABCDEF) are present on pDK2 while the phthalate operons which are duplicated are present on both pDK2 (ophA'B'C'R') and pDK3 (ophABCR). DK17 with an optimal temperature of $30^{\circ}C$ showed no growth at $37^{\circ}C$. When transferred to $30^{\circ}C$, however, the $37^{\circ}C$ culture began to grow immediately, indicating that $37^{\circ}C$ is not lethal but stressful for DK17 growth. In addition, when exposed to $37^{\circ}C$ even for a short time, a part of DK17 cells lost the ability to degrade o-xylene (a model compound of alkylbenzenes). When two hundred colonies were randomly selected for colony PCR for pDK2-specific akbC, ophC', or pDK3-specific ophC, a total of 29 colonies were found to have lost at least one of the three genes. PFGE analysis clearly showed that all the mutants have different megaplasmid profiles from that of DK17 wild type, which are divided into five different cases: Type I (10 mutants, pDK2 loss and acquisition of a new ~700 kb plasmid), Type II (9 mutants, pDK2 loss), Type III (8 mutants, pDK3 loss and acquisition of a new ~400 kb plasmid), Type IV (1 mutant, pDK3 loss), and Type V (1 mutant, pDK2 and pDK3 loss and acquisition of the ~400 kb and ~700 kb plasmids). The above results showing that growth temperature changes can induce physical changes in bacterial genomes suggest that environmental changes in habitats including temperature fluctuations affect significantly the evolution of bacteria.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.3
• /
• pp.161-183
• /
• 2011

This study aims to design, develop the impact of a high school course in practical problem- focused teaching plan which will enable students to deal with an aging society, and prepare well for the aging by looking at issues the elderly face. This study set a target of analyzing the 2007 revised curriculum manual to develop instructor-led teaching and learning plans for 'Successful aging preparation'. Five common subjects were reframed on a practical problem basis through factor analysis of preliminary research regarding aging education for teenagers and the 2007 revised curriculum and textbooks of Technology Home Economics, and Human Development. The practical problem was 'What do we need to do to Successfully live an independent life in aging?', and the subjects studied to answer this question were the aging society and population changes. the nature of the elderly, aging preparation, care of the elderly, and welfare services for the elderly. These five subjects were grouped under the main categories of The Aging Society. Understanding the Elderly, and aging Preparation. The ultimate objective of the lessons was, through critical reasoning, to inquire into the causes of current problems the elderly face so that teenagers can understand aging societies and the elderly, and prepare for a Successful aging. Another objective was to seek reasonable alternatives for teenagers as they prepare for Successful and independent aging, and increase their problem-solving abilities in choosing the best course of action by considering the ripple effect of consequences of each of those alternatives. The practical problem-teaching lesson plans consisted of five classes on practical reasoning instruction. This study suggests that new high school curricula should include lessons on preparation for aging so that students can deal successfully with our aging society.

• The Korean Journal of Nuclear Medicine
• /
• v.30 no.3
• /
• pp.315-324
• /
• 1996

The purpose of this study was to compare the specific binding ratio method with model-based methods in estimating the transporter parameter $k_3/k_4$ in normal controls and Parkinson's patients with [I-123]IPT SPECT and to evaluate the usefulness of [I-123]IPT SPECT. $6.5{\pm}1.1$ mCi ($239.0{\pm}40.3$ MBq) of [$^{123}I$]IPT was intravenouly injected as a bolus into six normal controls(age:$45{\pm}13$) and seventeen patients(age:$55{\pm}8$) with Pakinson's disease(PD). The transporter parameter $k_3/k_4$ was derived using the Ichise's graphical method($R_v$) and Lassen's area ratio method($R_A$) for the dynamic IPT SPECT data without blood samples. Then, the relationships between the transporter parameter $R-v,\;R_A$ and the ratio of (BG-OCC)/OCC at 115 minutes were evaluated by linear regression analysis. $R_vs$ by Ichise's graphical method for NC and PD were $2.08{\pm}0.29$ and $0.78{\pm}0.31$, respectively. $R_As$ by Lassen's area ratio method for NC and PD were $1.48{\pm}0.16$ and $0.65{\pm}0.24$, respectively. The correlation coefficients between (BG-OCC)/OCC and $R_v$, (BG-OCC)/OCC and $R_A$, and $R_v$ and $R_A$ were 0.93, 0.90, 0.99 and their corresponding slopes were 0.54, 0.34, and 0.65, respectively. The $R_v$ and $R_A$ of NC were significantly higher than the ones of PD. That is, the $k_3/k_4$ of NC was clearly separated from the one of PD. $k_3/k_4$ showed a good correlation with the ratio of (BG-OCC)/OCC. The results indicate that the noninvasive simplified quantitative methods may be useful to measure the transporter parameter $k_3/k_4$ and the specific binding ratio method can be used for quantitative studies of dopamine transporter with [I-123]IPT SPECT in humans brains.