• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.217-222
• /
• 2006

In this study, we performed three dimensional(3-D) modeling and simulation of terrain surfaces by using large scale aerial photographs. The objectives of this study are to use landscape analysis including 3-D database of built environments. The test area is selected around Olympic stadium located in Susung-gu, Daegu. A 1:5,000 scale of ortho-photo map is generated by photogrammetric procedures from 1:20,000 scale of aerial photographs, Digital Elevation Model (DEM) is also extracted from stereo aerial photographs or digital maps. The heights of buildings are determined using GPS control survey and aerial photographs in the test area, DEMs are extracted from the digital map. And then the two are combined three-dimensional changes of landscape views of buildings with terrain are simulated.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.327-330
• /
• 2003

The objectives of this study are to develope the automatic design programs to offer the data when constructing a small scale vinyl-house by region. This program consists of four subroutines. The first is an automatic greenhouse modeling program, the second is a calculating design load program by region, the third is a structural analysis program and the last is a optimum shape design program. The structural analysis can be conducted by simple date input and considering the design load of the install regions into account. The shape of input data is very simple, and the program reflects the design load by region. The output data can be obtained from the automatical calculation processing after structural analysis. The program was verified by compared with outputs of a common use structural analysis program and the results are the same. It was concluded that the developed program could be used efficiently in optimum design of small scale vinyl house.

• 방재기술
• /
• 통권22호
• /
• pp.9-16
• /
• 1997

This paper has two objectives. One is to introduce a software package, "FASTLite" for fire safety engineering calculation, the other to show the modeling result of a backdraft incident on the 62 WATTS street. A classic backdraft usually persists only seconds before exhausting their fuel supply but in this case the flame had persists for at least 6 and a half minutes. It is truly necessary to find out where the fuel came from to feed this flame for so long. The backdraft is successfully modelled by using FASTLite. To help understanding of this backdraft, the calculation with the door open is also carried out and compared to the backdraft.

• 한국전산구조공학회논문집
• /
• 제25권4호
• /
• pp.293-300
• /
• 2012

본 논문에서는 직교이방성 적층평판에서의 균열생성 및 전파로 이루어진 층간분리해석을 다룬다. 기존의 p-유한요소가 가지고 있는 요소의 강건성을 균열진전해석에 적용하여, 균열진전시 모델링을 재구성하지 않고, 균열 선단부에 해당되는 꼭지점 모드의 위치만을 이동하도록 하여, 요소망을 단순화시켰다. 이와 같은 층간분리해석에 대해서 이 논문에서의 주요 목적은 다음 두 가지이다. 첫째, 적층복합 재료의 층간분리해석 시, 일반적인 유한요소 모델과 비교하여 매우 간단한 요소망을 가지는 모델을 제안하는 것이다. 모델의 타당성을 평가하기 위해 적층 복합재료로 구성된 이중 외팔보 해석을 통하여, 기존 참고문헌 값과의 비교를 수행하였다. 둘째, 제안된 모델을 내부균열을 갖는 적층평판의 층간분리해석에 적용하여 여러 가지 거동 양상에 대한 평가이다. 이와 같은 목적을 수행하기 위하여 로바토 형상함수를 이용한 완전층별요소가 고려되었으며, 선형탄성파괴역학에 기초한 3차원 가상균열닫힘법을 이용하여 에너지 방출률을 산정하였다.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.907-915
• /
• 2000

The movement of teeth and initial stress associated with the treatment of orthodontics have been successfully studied using the finite element method. To reduce the effort in preprocessing of finite element analysis, we developed two types of three-dimensional finite element models based on the standard teeth model. Individual malocclusions were incorporated in the finite element The movement of teeth and initial stress associated with the treatment of orthodontics have been successfully studied using the finite element method. To reduce the effort in preprocessing of finite element analysis, we developed two types of three-dimensional finite element models based on the standard teeth model. Individual malocclusions were incorporated in the finite element models by considering the measuring factors such as angulation, crown inclination, rotation and translations. The finite element analysis for the wire activation with a T-loop arch wire was carried out. Mechanical behavior on the movement and the initial stress for the malocclusion finite element model was shown to agree with the objectives of the actual treatment. Finite element models and procedures of analysis developed in this study would be suitably utilized for the design of initial shape of the wire and determination of activation displacements.

• 대한수학교육학회지:학교수학
• /
• 제6권3호
• /
• pp.283-299
• /
• 2004

학생들이 실제 문제 상황에서 수학을 이용하고 문제를 해결하는 것은 수학교육의 중요한 목표이다. 이 연구는 수학적 모델링이 그러한 수학 학습의 목표에 적합하다고 보고 수학적 모델링을 통해서 학생들이 어떤 수학내용을 학습하고 어떤 추론을 경험하고 사용하는지 살펴보았다. 학생들은 수학적 모델링 과정에서 학교수학에서 강조되어 왔던 연역과, 규칙성을 찾는데 기여했던 귀납 뿐 아니라 여러 유형의 가추를 사용하였다. 하나의 사례 연구를 통해 일반화할 수는 없지만, 수학적 모델링에서 연역은 수학적 모델이 옳은지 현실에 비추어 확인하는 과정에서 그리고 수학적 결과를 유도하여 해를 구할 때, 귀납은 수학적 모델이 옳은지를 실험적으로 검증해 보고자 할 때 사용되었다. 가추는 현실 모델로부터 수학적 모델을 추상화하고, 수학적 결과에 대한 현실적 근거를 제시하는 해석을 하고, 현재의 수학적 모델을 수정하여 새로운 수학적 모델을 도출하는데 사용되었다.

• 보건교육건강증진학회지
• /
• 제27권2호
• /
• pp.79-93
• /
• 2010

Objectives: This study aims to identify the factors associated with the stages of change in colorectal cancer screening, and develop a model explaining these stages of change by using structural equation modeling analysis. Methods: On the basis of literature review and expert advice, we constructed our hypothetical model that consisted of five theoretical constructs(process of change, pros, cons, self-efficacy, stage of change). In 2009, data was collected from 486 participants aged between 50 and 69. The data were analyzed by SPSS 15.0 and AMOS 6.0. Results: In the case of stage of adoption, the contemplation stage was the most common (37.4%), followed by the action stage (26.5%). In the final model of the stage of change for colorectal cancer screening, there was a direct influence of the process of change ($\gamma$=.562, p<.001), and cons ($\gamma$=.132, p<.01) on the stage of change with the terms of GFI .931, AGFI .904, RMR .038, NFI .930, and NNFI .936. Conclusion: It is necessary to produce and disseminate evidence-based cancer screening information, which can mitigate the negative attitude among the public toward cancer screening. Also, it is essential to provide a safer and more comfortable environment at cancer screening center.

• Journal of Preventive Medicine and Public Health
• /
• 제52권6호
• /
• pp.384-392
• /
• 2019

Objectives: This study aimed to explore the health inequality discourse in the Korean press by analyzing newspaper articles using a relatively new content analysis technique. Methods: This study used the search term "health inequality" to collect articles containing that term that were published between 2000 and 2018. The collected articles went through pre-processing and topic modeling, and the contents and temporal trends of the extracted topics were analyzed. Results: A total of 1038 articles were identified, and 5 topics were extracted. As the number of studies on health inequality has increased over the past 2 decades, so too has the number of news articles regarding health inequality. The extracted topics were public health policies, social inequalities in health, inequality as a social problem, healthcare policies, and regional health gaps. The total number of occurrences of each topic increased every year, and the trend observed for each theme was influenced by events related to its contents, such as elections. Finally, the frequency of appearance of each topic differed depending on the type of news source. Conclusions: The results of this study can be used as preliminary data for future attempts to address health inequality in Korea. To make addressing health inequality part of the public agenda, the media's perspective and discourse regarding health inequality should be monitored to facilitate further strategic action.

• 치위생과학회지
• /
• 제24권1호
• /
• pp.9-21
• /
• 2024

Background: The purpose of this study was to utilize text network analysis and topic modeling to identify interconnected relationships among keywords present in patent information related to oral health, and subsequently extract latent topics and visualize them. By examining key keywords and specific subjects, this study sought to comprehend the technological trends in oral health-related innovations. Furthermore, it aims to serve as foundational material, suggesting directions for technological advancement in dentistry and dental hygiene. Methods: The data utilized in this study consisted of information registered over a 20-year period until July 31st, 2023, obtained from the patent information retrieval service, KIPRIS. A total of 6,865 patent titles related to keywords, such as "dentistry," "teeth," and "oral health," were collected through the searches. The research tools included a custom-designed program coded specifically for the research objectives based on Python 3.10. This program was used for keyword frequency analysis, semantic network analysis, and implementation of Latent Dirichlet Allocation for topic modeling. Results: Upon analyzing the centrality of connections among the top 50 frequently occurring words, "method," "tooth," and "manufacturing" displayed the highest centrality, while "active ingredient" had the lowest. Regarding topic modeling outcomes, the "implant" topic constituted the largest share at 22.0%, while topics concerning "devices and materials for oral health" and "toothbrushes and oral care" exhibited the lowest proportions at 5.5% each. Conclusion: Technologies concerning methods and implants are continually being researched in patents related to oral health, while there is comparatively less technological development in devices and materials for oral health. This study is expected to be a valuable resource for uncovering potential themes from a large volume of patent titles and suggesting research directions.

• 한국전산구조공학회논문집
• /
• 제24권1호
• /
• pp.55-60
• /
• 2011

본 논문에서는 NURBS의 기저함수를 이용하는 등기하 해석을 선형 탄성 문제에 적용하였다. 등기하 해석의 목적은 기하학적 모델링 (CAD)와 수치적 해석 (CAE)를 통합하는 것인데, 이는 계산 망으로써 NURBS에 의한 기하학적 모델링 결과를 직접 이용해서 이룰 수 있다. NURBS 곡면은 조정점과 노트 벡터들을 이용하여 정확한 기하학적 형상을 표현할 수 있으며, 또한 요소의 정밀화 과정이 상대적으로 용이하다는 장점이 있다. 본 연구를 통해 개발된 컴퓨터 코드의 정당성을 보이기 위해 비교적 단순한 형태의 두 가지 구조모델에 적용하였다 ; 1) 균일 내압을 받는 실린더, 2) 균일 인장력이 작용하는 중앙에 구멍이 있는 정사각형 판. 이 두 모델은 정해가 있는 경우로서 절점을 추가하는 h-정밀화와 기저함수의 차수를 증가하는 p-정밀화에 의한 등기하 해석법을 적용한 근사해의 수렴성을 분석하였다.