• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1197-1200
• /
• 2003

This paper presents A/D converter for the signal processing of infrared sensor and CMOS image sensor. The A/D converter designed in a 0.25um CMOS process provides a resolution of 10bits at a sampling rate of 50MS/s while dissipating 67mW at 2.5V supply voltage. This A/D converter is based on a pipeline architecture in which the number of bits converted per stage and the stage number are optimized to achieve the desired linearity and reduce power consumption as well. Simulation results show that the A/D converter using 1.5bit per stage MDAC with switched capacitors and dynamic comparators efficiently reduces the power consumption.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.982-985
• /
• 1999

An efficient technique to trade off speed for resolution is the sigma-delta modulation (SDM). This paper proposes a new SDM architecture to improve conversion rates and SNR(Signal-to Noise Ratio) by using master clock and four divided clock. The charateristics of the proposed SDM are simulated in MATLAB environment. and optimizing the capacitor sizes is done by iterative processing. other analog characteristics are simulated using 0.65${\mu}{\textrm}{m}$ n-well CMOS process, double poly and single metal. The result of simulation shows that more increasing the effective bits of internal ADC/DAC, bigger the improvement of SNR.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.239-242
• /
• 1999

In this paper, we report the process/device design of high-speed, high-voltage SOI smart power IC for mobile communication system, high-speed HDD system and the electronic control system of automobiles. The high voltage LDMOS with 70V breakdown voltage under 0.8${\mu}{\textrm}{m}$ design rule, the high voltage bipolar with 40V breakdown voltage for analog signal processing, the high speed bipolar with cut-off frequency over 20㎓ and LDD NMOS for high density were proposed and simulated on a single chip by the simulator DIOS and DESSIS. And we extracted the process/device parameters of the simulated devices.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.222-223
• /
• 2010

TOP245P driver IC modeling technique are proposed for the LED Driver design. Analog behavioral model of TOP245P IC including the shunt regulator, under-voltage(UV) detection, over-voltage(OV) shut-down and SR flip-flop is developed by using PSPICE. The averaged-model and switching-model is applied to the LED driver simulation. The simulation results by the proposed TOP245P IC modeling technique are in good agreement with that in the data sheet and an experiment data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.9-9
• /
• 2000

Accurate counting and packaging pills is one of the most fundamental works of the pharmaceutical industry. But it is so labor consuming and very hard to be automated. As the pharmaceutical industry is growing bigger, the need of counting and packaging automation is increasing to obtain effective mass production. Precise and quick sensing is required in the counting and processing of quickly dropping pills to improve the productivity. There are many trials for this automation and automatic machine. But the performance of the existing counting machine varies with the size, shape and the dispersion degree of pills In this research, authors design the counting and packing machine of medicinal pills that is more accurate and highly trustworthy After getting analog signal from optical sensor, pill passage is discriminated from chosen characteristic feature using microprocessor.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.943-950
• /
• 2008

A novel nondestructive testing (NDT) system, which is able to detect a crack with high speed and high spatial resolution, is urgently required for inspecting small cracks on express train wheels. This paper proposes a high speed scan type magnetic camera, which uses the multiple amplifying circuits and the crack indicating pulse output system. The linearly integrated Hall sensors are arrayed in parallel, and the Hall voltages from each sensor in the scanning direction are obtained and amplified. High-speed NDT can be achieved by using the exclusive analog-digital converter and micro-processor because the ${\partial}\;V_H/\;{\partial}$ x value, which provides the most important crack information, can be obtained by buffering and calculating. The effectiveness of the novel method was verified by examine using cracks on the wheel specimen model.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.893-894
• /
• 2006

DSP based on a 8 bit microprocessor was studied for ECG and PPG signals. Digital filtering has an advantage of reducing hardware components in system-on-chip design. However, low resolution such as in 8 bit data has much difficulties in DSP. We demonstrated a comparable performance of DSP filtering compared with analog filters.

• 전자공학회논문지C
• /
• 제34C권6호
• /
• pp.58-70
• /
• 1997

In this paper, an 8bit CMOS low power, high-speed current-mode folding and interpolation A/D converter is designed with te LG semicon $0.8\mu\textrm{m}$ N-well single-poly/double-metal CMOS process to be integrated into a portable image signal processing system such as a digital camcoder. For good linearity and low power consumption, folding amplifiers and for high speed performance of the A/D converter, analog circuitries including folding block, current-mode interpolation circuit and current comparator are designed as a differential-mode. The fabricated 8 bit A/D converter occupies the active chip area of TEX>$2.2mm \times 1.6mm$ and shows DNL of $\pm0.2LSB$, INL of <$\pm0.5LSB$, conversion rate of 40M samples/s, and the measured maximum power dissipation of 33.6mW at single +5V supply voltage.

• 한국정밀공학회지
• /
• 제17권8호
• /
• pp.94-99
• /
• 2000

In this study applied the general controller into th 16bit ordinary controller and recommand the simulator features the real system's propeties without DSP(Digital Signal Processing)-card. This simulator is designed to be synchronized in real time using A/D(Analog-Digital) convert and D/A(Digital-Analong) convert. In this study DSP card which is usually used for complex calculation is replaced with personal computer and designed to control, control-force using with the 16-bit micro processor.

• 한국정보통신학회논문지
• /
• 제25권8호
• /
• pp.1130-1133
• /
• 2021

In this paper, a miniaturized sensor interface circuit for the respiration detection system is proposed. Respiratory diagnosis is one of the main ways to predict various diseases. The proposed system consists of respiration detection sensor, temperature sensor, and interface circuits. Electrochemical type gas sensor using solid electrolytes is adopted for respiration detection. Proposed system performs sensing, amplification, analog-to-digital conversion, digital signal processing, and i2c communication. And also proposed system has a small form factor and low-cost characteristics through optimization and miniaturization of the circuit structure. Moreover, technique for sensor degradation compensation is introduced to obtain high accuracy. The size of proposed system is about 1.36 cm².