• 한국의학물리학회지:의학물리
• /
• 제27권2호
• /
• pp.64-71
• /
• 2016

삼차원 프린터(3DP)를 이용하여 환자맞춤형 전자선 치료용 볼루스(patient specific customized bolus, PSCB)를 제작하는 절차를 고안하고 제안된 방법으로 제작한 PSCB의 선량 정확도를 평가했다. 치료계획장치에서 치료계획표적용적(PTV)에 적합한 전자선 빔과 조사면 크기를 선택하고 초기 선량계산을 수행했다. 계산된 선량분포를 기반으로 PSCB를 그리고 재계산을 수행했다. 수 차례 반복을 통해 최상의 PSCB를 설계하고 설계된 윤곽자료를 DICOMRT 프로토콜을 이용해 자체 제작한 변환프로그램으로 전송했다. PSCB의 윤곽자료는 자체 변환프로그램을 이용해 3DP에서 인식 가능한 파일(STL 포맷)로 변환한 후 3DP를 이용해 제작했다. PSCB의 유용성을 검증하기 위해 2명의 가상 환자(오목, 볼록 유형)를 생성했고 각각의 환자에 가상의 PTV와 정상장기(OAR)을 생성했다. 3D-PSCB 를 사용했을 때와 사용하지 않았을 때의 선량체적히스토그램(DVH)와 선량 특성을 비교했다. 3D-PSCB 제작의 정확도를 분석하기 위해 필름 선량측정을 통해 선량 정확도를 평가했다. 치료계획 결과와 필름을 이용한 선량분포를 중첩한 후 빔 중심축에서의 심부선량곡선을 구했고 감마분석(3% 선량 오차와 3 mm 거리오차)을 수행 했다. 2명의 가상환자 모두에서 PSCB를 사용한 경우 PTV 선량은 큰 차이를 보이지 않았다. PSCB를 사용할 경우 PSCB를 사용하지 않는 경우에 비해 OAR의 최대 선량, 최소선량, 평균선량은 각각 평균 9.7%, 36.6%, 28.3% 감소했다. 처방선량의 90% 선량($V_{90%}$)을 받는 OAR의 용적은 PSCB를 적용할 경우 약 99% 낮아졌다(14.40 vs $0.1cm^3$). 또한 처방선량의 80% 선량을 받는 OAR 체적도 PSCB를 사용할 경우 약 91% 줄었다(42.6 vs $3.7cm^3$). 감마분석 결과(3%, 3 mm) 오목 및 볼록 볼루스를 적용한 경우 각각 95%, 98% 통과율(pass rate)을 보였다. 3DP를 이용해 PSCB를 제작하는 절차를 정립하고 선량적 정확도를 평가해서 임상적용이 가능한 만족할 만한 결과를 얻었다. 3DP 기술의 빠른 발전에 힘입어 PSCB의 임상적용이 좀 더 쉬워지고 적용대상이 확장될 것으로 생각된다.

• Radiation Oncology Journal
• /
• 제26권2호
• /
• pp.104-112
• /
• 2008

목적: 기존치료에 반응하지 않는 다발성 간전이를 동반한 대장암 환자에서 방사선치료와 병합한 수지상세포 면역치료의 독성과 반응도를 조사하였다. 대상 및 방법: 2004년 5월부터 2006년 11월까지 다발성 간전이가 동반된 대장암 환자들 중에서 항암화학 요법에 반응하지 않은 환자 중 지원자를 대상으로 연구를 시행하였다. 본 임상 시험에 대하여 동아대학교병원과 부산대학교병원의 임상윤리심의위원회의 허가를 획득하였고, 동의서에 서명한 환자들을 임상 시험의 대상으로 등록하였다. 환자의 말초 혈액으로부터 수지상세포를 추출하여 배양하였다. 임상시험 일자에 맞추어서 $6{\times}10^6$개의 수지상세포를 바이알(0.5 ml)에 넣어서 디씨백/아이알 주사를 만들었다. 수지상세포 면역치료는 2주 간격으로 간전이암조직에 3회 주사하고, 5주에 내약성 평가를 하였다. 내약성 평가를 통과한 환자에게는 8주에 4번째 수지상세포 면역치료를 하였다. 병의 악화가 없거나 임상시험에 대한 환자의 동의 철회가 없는 경우에는 5, 6번째 수지상세포 면역치료를 각각 12, 16주에 시행하였다. 방사선치료는 수지상세포 면역치료를 주사할 간전이암 부위에 주사하기 전일 및 당일에 4 Gy씩을 조사하였다. 내약성 평가는 $3{\times}10^6$개의 수지상세포로부터 시작하여, $12{\times}10^6$개의 수지상세포까지 시행하였다. 내약성 평가의 최대 내성 용량으로 추가 임상시험을 하였다. 수지상세포 면역치료 주사를 맞은 모든 환자들에서 안전성 평가를 하였다. 4회 이상 주사를 맞은 환자들을 대상으로 10주에 치료 반응을 평가하여 유효성을 조사하였다. 결과: 임상시험에 등록한 24명 중 22명에서 수지상세포 면역치료를 시행하였다. 내성약 평가에는 14명이 등록하여 11명에서 평가를 완료하였다. 시험약과의 관련성이 있을 것으로 생각되는 grade 3 이상의 약물반응으로 인한 이상반응은 없었다. $12{\times}10^6$개의 수지상세포를 내성용량으로 확인하였고, 내성용량인 $12{\times}10^6$개 수지상세포 면역치료를 이용하여 8명에서 추가로 시험을 하였다. 치료에 대한 환자들의 내성은 양호하였고, grade 3을 초과하는 치명적인 부작용은 발생되지 않았다. 4회 이상의 수지상세포 면역치료 주사를 받은 환자가 17명이었고, 이 중의 15명에서는 종양의 반응도 평가가 이루어졌다. 본 연구의 목적은 안전성 평가이지만, 면역치료의 유효성 평가를 위해, 방사선치료와 수지상세포 면역치료 주사가 시행된 부위 외의 간전이암에서 반응도를 조사 하였다. 면역치료의 반응은 평가가 이루어진 환자들에서 정지성 병변이 4명, 진행성 병변이 11명 이었다. 결론: 수지상세포 면역치료와 병행한 방사선치료는 이론적으로 국소 및 전신 제어에 상승효과가 있을 것으로 기대할 수 있다. 하지만 기존 치료에 반응하지 않는 매우 진행된 직장암 환자들을 대상으로 한 본 연구에서는 방사선 치료와 병합한 수지상세포 면역치료로 인한 심각한 부작용의 발생은 없었다는 결과와 4예에서의 정지성 병변의 관찰을 보고한다. 수지상세포의 최대 투여 용량, 적절한 투여 방법, 적절한 방사선의 양, 방사선과 수지상 세포의 적절한 투여 간격 등에 관한 추가 연구를 통하여, 향후 제 2상, 3상 시험으로서의 진행 여부에 긍정적인 결과를 얻을 수 있다고 판단한다.

• 대한환경공학회지
• /
• 제32권1호
• /
• pp.33-46
• /
• 2010

본 연구는 광분해 산화공정으로 난분해성 물질인 N-Nitrosodimethylamine (NDMA)인 제거 및 부산물 생성 특성을 파악하기 위한 3개의 독립변수 (자외선 강도($X_1:\;1.5{\sim}4.5\;mW/cm^2$, 초기 NDMA 농도($X_2:\;100{\sim}300\;uM$), pH(X3:3~9))와 4개의 종속변수(NDMA 제거율($Y_1$), dimethylamine (DMA) 생성농도($Y_2$), dimethylformamide (DMF) 생성농도($Y_3$) 및 $NO_2$-N 생성농도($Y_4$))로 구성된 박스-벤켄 설계를 이용한 실험계획을 적용시켜 예측 모델과 광분해 산화 최적조건을 수립하였다. 실험결과 2시간 광분해 후 NDMA는 거의 완전히 제거되었으며 DMA, DMF와 $NO_2$-N은 NDMA 광분해와 동시에 부산물로 생성되었다. 광분해 최적의 조건을 얻기 위해 정준분석을 수행하여 최적 점 (반응값, 독립변수 조건)과 예측반응모델을 수립한 결과, 다음과 같은 결과를 얻었다 ($Y_1=117+21X_1-0.3X_2-17.2X_3+{2.43X_1}^2+{0.001X_2}^2+{3.2X_3}^2-0.08X_1X_2-1.6X_1X_3-0.05X_2X_3$ ($R^2$ = 96%, Adjusted $R^2$ = 88%)와 99.3% ($X_1:\;4.5\;mW/cm^2$, $X_2:\;190\;uM$, $X_3:\;3.2$), $Y_2=-101+18.5X_1+0.4X_2+21X_3-{3.3X_1}^2-{0.01X_2}^2-{1.5X_3}^2-0.01X_1X_2-0.07X_1X_3-0.01X_2X_3$ ($R^2$= 99.4%, 수정 $R^2$ = 95.7%)와 35.2 uM ($X_1:\;3\;mW/cm^2$, $X_2:\;220\;uM$, $X_3:\;6.3$), $Y_3=-6.2+0.2X_1+0.02X_2+2X_3-{0.26X_1}^2-{0.01X_2}^2-{0.2X_3}^2-0.004X_1X_2+0.1X_1X_3-0.02X_2X_3$ ($R^2$= 98%, 수정 $R^2$ = 94.4%)와 3.7 uM ($X_1:\;4.5\;mW/cm^2$, $X_2:\;290\;uM$, $X_3:\;6.2$), $Y_4=-25+12.2X_1+0.15X_2+7.8X_3+{1.1X_1}^2+{0.001X_2}^2-{0.34X_3}^2+0.01X_1X_2+0.08X_1X_3-3.4X_2X_3$ ($R^2$= 98.5%, 수정 $R^2$ = 95.7%)와 74.5 uM ($X_1:\;4.5\;mW/cm^2$, $X_2:\;220\;uM$, $X_3:\;3.1$). 반응표면분석법 중 하나인 박스-벤켄법은 UV 광분해에 의한 NDMA 분해 및 부산물 생성에 대한 통계학적 및 수학적인 결과 및 최적의 운전조건을 제시하였다. 예측모델의 검정을 통하여 박스-벤켄법은 매우 높은 신뢰성을 보였다.

• 한국유통학회:학술대회논문집
• /
• 한국유통학회 2005년도 춘계학술대회 발표논문집
• /
• pp.383-405
• /
• 2005

재래시장은 지역의 중심지적인 특성과 문화적인 특성이 고스란히 반영된 지역 거점지이며 인근 지역주민의 상거래라는 1차적 장소적 기능과 사회문화적 측면의 상호 정보문화교류, 커뮤니티 공간 형성으로 유통의 집객시설과 집적시설로서 중요한 역할과 기능을 하고 있다. 5인 이하 가족 단위의 생계형으로 취급상품, 구입방범, 판매방식 등이 전근대적인 경영기법을 통해 한국의 대표적 소매업태로서의 역할을 해오고 있다. 1990년대 이후 신유통업태와 대형할인점 진출로 인해 재래시장은 급격한 경쟁력 상실과 소비자들의 생활수준의 향상, 구매패턴의 변화, 인터넷의 급속한 확산 등 외부적인 유통 환경변화에서 경쟁력을 상실하고 설 자리를 잃어가고 있다. 정부의 지역경제 활성화와 국민경제의 발전 측면에서 고령화된 재래시장에 대한 대책 중 정부의 예산지원 정책으로 환경개선사업, 연구용역, 경영현대화중심의 국고지원 사업은 2001년부터 2004년까지 총 3,853억원의 국고가 지원되었으나 활성화 사업의 실효성에는 아직 정확히 나타나고 있지 않은 상황으로 조사되었다. 또한 지원사업을 추진함에 있어 시장상인리더들의 전문성결여로 종합적인 추진전략과 중장기적 계획수립 및 자발적인 상인들의 합의점 유도 반감으로 지속적인 사업추진방향에 한계점을 나타냈다. 재래시장이 단순히 물건을 사고파는 물리적인 장소적 의미에서 벗어나 새로운 지역 장소적 생활공간으로 커뮤니티적 접근을 통한 장소적 창조전략이 필요하다. 이에 시대적 패러다임 변화에 따른 새로운 사업 방향 전환을 통해 재래시장의 장소적 기능 도입을 동해 문화적 경제적 의미를 지닌 공간으로 재조명을 동해 발전방향을 제시하고자 한다. 재래시장은 지역 기반으로 한 지역생활자들과 자연스럽게 커뮤니티를 상호 형성하고 정보와 지식 공유를 통해 부 창출 공간으로 재생되어야 할 것이다 재래시장이 부 창출 공간으로 재생하려면 시대적 장소적 환경에 맞는 시설과 교류활동을 통찬 상호신뢰구축 활동 속에서 고객이 원하는 방향으로 영업환경도 변화하여야 하며, 지역단위 중심 영국의 TCM, 미국의 BID, 일본의 TMO 등 해외 벤치마킹을 통한 단위 시장상가 점포단위의 점(點)정책에서 선(線)단위의 상가로 환경사업과 거시적인 지역단위중심인 면(面) 정책적 접근을 통한 커뮤니티적인 발상 전환이 필요하다. 국내외 사례비교 분석을 통해 사회적 정책수요 발굴과 기존의 추진방법에 대한 선진사례 연구를 통한 NPO, NGO 등의 시민기업가와 이를 수행키 위한 혁신성과 전문성조정능력을 갖춘 리더자 양성이 무엇보다 중요하다. 특히 지역자원 활용 소스 중심의 문화관린 산업의 seeds 발굴과 향토상품의 상품화와 네트워크 조직망 구축을 위한 지역중심의 복합 생활문화 공간이 필요할 것이며, 이를 촉진키 위한 mentor academy시스템 접근을 통해 점점 고령화되어 가고 있는 재래시장에 대해 차별적 특성이 반영된 종합적이고 체계적 접근 방법연구가 필요하다.

• Radiation Oncology Journal
• /
• 제23권4호
• /
• pp.223-229
• /
• 2005

목적: 근접방사선 치료시 직장내 선량측정은 치료간(Inter-fraction) 직장의 형태가 변화하므로 측정의 재현성을 이룰 수 없다. 본 연구에서는 근접방사선치료용 다목적 팬톰(Multi Purpose Brachytherapy Phantom, MPBP)을 제작하여 치료 시와 동일한 조건을 재현하였고 이때 측정한 선량 값을 직장의 부작용을 줄이기 위해 선량최적화에 적용하고자 하였다. 대상 및 방법: 자궁경부암 근접방사선 치료 시 탄뎀(tandem)과 난형체(ovoid)를 사용한 환자 4명을 대상으로 다이오드 검출기를 이용하여 직장표시 기준점 R1에서 선량측정을 시행하였다. 환자 당 5회씩 총 20회 직장선량을 측정하였다. 그리고 반복 측정 시 다이오드 검출기의 설정 변화(set up variation)를 분석하였다. 그리고 자체 제작된 근접방사선치료용 다목적 팬톰에서 MFA (Multi Function Applicator)를 이용하여 치료 시와 동일한 조건을 재현한 후 열형광선량계(TLD)를 이용하여 직장 표시 기준점 좌표 위치에서 선량을 측정하였다. 결과: 직장 내 다이오드 검출기의 측정 결과 설정 변화는 환자 1의 경우에 Y방향에서 최고 $11.25{\pm}0.95mm$보였고, 환자 2와 3은 Z 방향에서 각각 $9.90{\pm}4.50mm$와 $20.85{\pm}4.50mm$를 나타냈다. 그리고 환자 4는 Z 방향에서 $19.15{\pm}3.33mm$의 변화를 나타내었다. 또한 다이오드 검출기 위치에 따른 평균선량 값은 $122.82{\pm}7.96cGy{\sim}323.78{\pm}11.16cGy$로 나타났다. MPBP에서 TLD의 측정 결과는 직장 표시 기준점(R1)에서 환자1과 4는 상대오차가 각각 최고 8.6%와 7.7%를 보였고, 환자2와 3은 각각 1.7%와 1.2%의 오차를 보였다. 그리고 R과 R2에서 측정한 선량 값들은 환자 2의 R 지점을 제외하고 계산값과 비교하여 $1.7{\sim}8.6%$ 높은 값을 나타냈다. 그리고 반복측정으로 인한 위치변화와 그에 따른 선량 값의 변화는 분석하지 않았다. 계산 값과 측정값의 상대오차가 미국의학물리학회 보고서에서 권고한 15% 내에서 잘 일치하는 것으로 분석되었다. 결론: 자체 제작된 근접치료용 다목적 팬톰(MPBP)은 치료 시와 동일한 조건에서 선량측정의 재현성을 이룰 수 있었고, 직장의 기준점에서 선량을 정확히 분석할 수 있었다. 또한 팬톰에서 측정한 데이터를 이용하여 직장의 부작용을 줄이기 위해 치료 전 선량 최적화를 이루는데 충분한 자료로 활용할 수 있다고 판단되었다.

• 항공우주정책ㆍ법학회지
• /
• 제28권1호
• /
• pp.115-157
• /
• 2013

시카고협약 일부 체약국은 자국 항공사에게 AOC(AOC and Operations Specifications)을 승인하여 발행하는 것 이외에 외국 항공사에게도 FAOC(Foreign AOC and Operations Specifications)을 발행하고 있으며 다양한 항공안전평가도 실시하고 있다. 외국 항공사에게 FAOC 승인 발행 및 항공안전평가 실시는 점차 확대되고 있는 추세로 전 세계적으로 항공안전 증진 및 항공기 사고율 감소에 기여한 공로가 크다고 볼 수 있으나, 한편으로는 승인 및 지적사항에 대한 적법성 논란 및 행정 편의를 표방하는 대표적 사례라는 지탄과 함께 감독 당국의 업무수행 능력 차이로 인하여 항공기 운항 상 불편이 초래되고 있다. 항공기 사고방지 및 효율적인 항공기 운항을 위하여 항공 안전 확보는 가장 중요한 요소 중의 하나로 타협할 수 있는 사항이 아니며, 따라서 국제항공사회는 ICAO에서 시카고협약부속서 19 Safety Management를 별도로 제정하여 2013년 말부터 적용하도록 하였다. 국제 항공 질서 확립 및 항공 안전 확보를 위하여 시카고협약 및 부속서는 체약국의 의무 및 '국제표준 및 권고방식(SARPs, Standards and Recommended Practices)'을 규정하고 있으며 각 체약국은 SARPs에 합당한 이행의무를 준수해야 한다. 이와 관련하여 각 체약국은 항공사의 안전운항체계를 확인하고 AOC를 승인하여 발행하며 지속적으로 관리감독 업무를 수행하고 있다. 이러한 AOC 승인 발행에 대한 ICAO 국제 표준은 체약국의 항공당국이 자국의 항공사를 대상으로 허가 및 교부하는 것으로 체약국을 운항하는 외국의 항공사에게까지 발급하도록 규정하고 있지 않으나 미국, 중국, 호주, 뉴질랜드, 몽골 등 일부 체약국은 자국 내 항공사에게 AOC 발행 뿐 아니라 외국의 항공사에게도 AOC(FAOC)를 인가하여 교부하고 있으며 이는 EASA 등으로 확대되고 있는 실정이다. AOC나 FAOC 이외에도 ICAO와 IATA는 항공당국 및 항공사 전반에 대한 항공안전평가가 있으며, 미국 및 유럽도 자국 및 회원국 등을 운항하는 외국 항공 당국 및 항공사에 대한 항공안전평가를 별도로 실시하고 그 평가 결과를 공표하면서 항공 안전 불합격으로 평가된 국가나 항공사에게는 운항 제한 등 불이익을 주고 있다. 이와 관련하여 본 논문에서는 AOC, FAOC 및 항공안전평가제도의 법적 근거 및 동향을 고찰하고 조종사비행기록부 탑재여부 등에 대한 국제 사례연구를 통하여 몇 가지 제언과 개선방안을 제시하였다. 본 논문이 현 제도의 미흡한 부분을 보완하고 불합리한 제한기준이 개선되는데 도움을 주고, 아울러 국제 표준 준수 및 항공안전 발전에 기여하길 기대한다. 항공법규 관련 합리적인 기준 수립 및 이행에 있어 가장 중요한 요소 중 하나는 시카고협약 및 SARPs에 대한 철저한 이해가 선행되어야 한다는 것이다. 법규 제정자, 연구기관, 전문가, 운영자 등 모든 관계자들의 긴밀한 협조 하에 기준 수립이 이루어질 때 항공법규 수립 및 이행에 대한 보다 실질적인 개선 및 질적 향상을 기대할 수 있을 것이다.

• Journal of Ginseng Research
• /
• 제26권3호
• /
• pp.111-131
• /
• 2002

본 총설은 1980년대부터 최근까지 국내외 학술잡지나 심포지움 등에 발표된 인삼의 주요 임상효능 연구결과를 요약 고찰하고, 그 임상 적응증과 안전성 등에 대한 검토를 통해 금후 인삼의 임상적 활용성 제고와 인삼의 진정한 약용가치 평가를 위한 임상연구의 발전에 도움을 주고자 하였다. 당뇨병을 비롯한 동맥경화성 질환, 고혈압, 악성질환, 성기능 장애 등의 만성질환에 대한 그 동안의 연구결과는 인삼의 치료효과보다는 예방 및 회복제로서의 효용성을 보여 주었다. 특히 이들 질환의 각종 자각적 장해증상과 장기 약물치료의 부작용으로 인한 QOL의 악화에 에 대한 개선효과가 관찰되었다. 그러나 인삼의 효과는 일반적으로 mild 하여 일차적 치료보다는 관행적 약물요법과 병용할 때 보조요법제로서 또는 부작용을 보다 적게 하는 효과가 기대된다. 또한 주요 강장효능과 관련하여 작업수행능력에 미치는 임상연구 결과는 인삼복용이 각종 스트레스 상태하의 신체적 조건에 대한 적응능력을 개선시켜 육체적 정신적 기능저하를 회복시키는 효과를 보였다. 이러한 임상시험에서 얻어진 결과가 그대로 인삼의 적응증(indication)이라고 단정할 수는 없으며, 그 효능의 과학적 증거들에 대해서는 아직도 논란이 많고, 임상실험의 유효성 평가와 관련된 방법론적 문제점도 많이 지적되고 있다. 보다 확실한 적응증 제시를 위해서는 표준화된 인삼시료를 이용하여 보다 체계적인 시험설계에 의한 객관적 효능평가가 필요하다. 한편 인삼(제품)복용에 의한 부작용(adverse effects)의 발생 가능성에 대한 사례보고들도 대부분 인삼의 과량복용이나 품질관리 미흡에서 기인되는 것으로 여겨지고 있다. 최근 해외 시장에서 유통되는 인삼제품 품질검사에서 사포닌 성분의 불검출 또는 함량 미달과 유해성분의 오염가능성 등 부정적 견해들이 다수 보고되었다. 그러나 표준화된 인삼제품의 추천 복용량을 사용한 대부분의 임상실험에서는 거의 유의할만한 부작용은 인정되지 않았다. 금후 연구와 관련하여, 품질표준의 지표성분으로 간주되는 진세노사이드의 절대함량과 그 성분조성 차이에 따른 임상효과의 차별성이 있는지에 대한 검토와, 특히 최근 실험적으로 밝혀지고 있는 사포닌 성분의 장내 세균에 의한 생물전환체의 인체 실험을 통한 효과 검정이 필요하다. 나아가서는 적정 복용량의 설정과 이와 관련되는 생체내 동태 및 생체이용율(bioavilability)에 관한 정보가 거의 없으므로 이것도 금후 검토해야 할 과제로 사료된다. 인삼은 전통약물로서 오랜 역사성과 그동안의 연구결과에 의한 과학성을 가지고 있으므로 건강유지와 병의 예방 및 회복촉진을 위한 보조요법제 또는 기능성 식품으로써의 유용성이 있는 것으로 판단된다. 앞으로 인삼의 활용성 증대를 위해서는 보다 과학적인 임상평가에 의한 안전성 및 유효성 입증과 제품의 엄격한 품질관리의 필요성이 더욱 강조되어야 할 것이다.

• 한국유통학회지:유통연구
• /
• 제15권3호
• /
• pp.1-34
• /
• 2010

본 연구의 목적은 국내 외식 프랜차이즈 시스템에서 가맹점에 대한 가맹본부의 관계품질에 영향을 미치는 변수를 사후 지원서비스로 설정하고, 사후 지원서비스가 가맹점의 관계품질(신뢰, 만족, 몰입)과 경영성과(재무적 성과, 비재무적 성과)에 미치는 영향에 대한 포괄적인 모형을 개발하는 것이다. 제안된 모형을 검증하기 위하여 서울 및 경기 지역의 외식 프랜차이즈 가맹점 경영자 500명을 대상으로 설문 조사를 하여, 구조방정식을 통해 실증 분석하였다. 분석결과는 다음과 같다. 첫째, 사후 지원서비스 요인 중 제품범주 및 가격 요인과 정보제공 및 문제해결 능력 요인은 가맹점의 만족과 몰입에만 영향을 미치는 것으로 나타났다. 둘째, 물류지원과 슈퍼바이저 지원 요인은 신뢰와 만족에만 영향을 미치는 것으로 나타났다. 셋째, 재교육 및 훈련지원 요인은 가맹점의 신뢰와 몰입에만 영향을 미치는 것으로 나타났다. 넷째, 판매촉진 요인은 신뢰 만족, 그리고 몰입 모두에 영향을 미치는 것으로 나타났다. 다섯째, 관계품질요인들 간의 관계는 신뢰가 만족에 긍정적인 영향을 미치지만 몰입에는 직접적으로 영향을 미치지 못하고, 만족을 통해서 몰입에 긍정적인 영향을 미치는 것으로 나타났다. 여섯째, 신뢰는 재무적 성과에만 긍정적인 영향을 미치고, 만족과 몰입은 재무적 성과와 비재무적 성과 모두에 긍정적 영향을 미치는 것으로 나타났다. 마지막으로 본 연구의 결과요약과 시사점, 그리고 연구의 한계점과 향후 연구방향이 제시되었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.