• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.175-180
• /
• 2002

In this paper, the system performace with the convolution rode using a Viterbi decoding and the one tap LMS(Least Meam Square) equalizer applied to the OFDM(Orthogonal Frequency Division Multiplexing) system, is analyzed through computer simulation. DMRS(Digital Microwave Radio System)is modeled as Rummler fading channel. In Simulation result, we known that the coding system improved about 3.6dB~10.5dB when BER is 10 $^3$and b is 0.1~0.2 in case of 16QAM(Qurdrature Amplitude Modulation). Also, we known that was improved about 19.7dB when the b is 0.1 and was demanded about 10.5dB when the b is 0.2 in case of 64QAM. we known that the soft decision improved about 2~0.9dB when the b is 0.1~0.2 in case of 16QAM and about 3.3~7.8dB in case of 64QAM. In the equalizer system, efficiency improved from the case of that Eb/No is more than 13dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.3
• /
• pp.207-218
• /
• 1991

In this paper, the characteristics of MODEM with the low and medium transmission rate which are recommended by the international organization such as CCITT have been studied and the features of the telephone channel have been investigated. Then three kinds of classification algorithm for the modulated signals have been suggested and their performance have been researched through the computer simulation. In case that the channel is ideal, the modulated type such as FSK, PSK and QAM could be detected correctly. Moreover, when the modulated signals are received through the telpehone channel or noisy channel, it could be seen that the performance of the correlation algorithm is superior to that of other two algorithms because of the correlation being robust to the characteristics of telephone chanel and Gasussian noise, although the performances of the two classification algorithm using the peak and phase difference, signal constellation and so on decrease rapidly as the amplitude distortion, delay distortion and Gaussian noise increase.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.79-87
• /
• 2013

A new modulation technique - correlative encoded FSK (CEFSK) - for use in power and bandwidth limited digital communication system is proposed. CEFSK is free of ISI and generates output signals which have a smooth and continuous phase transition and a reduced envelope fluctuation by keeping correlation between amplitude and phases of two subsequent symbols. In comparison to conventional one-bit differential detected (1DD) GFSK, the performance of the 1DD-CEFSK in a non-linearly amplified (NLA) channel impaired by additive white Gaussian noise (AWGN), ISI and IM, is analyzed via computer simulation. The simulation result shows that, in an NLA single-channel, 1DD-CEFSK provides a signal-to-noise ratio (SNR) advantage of up to 1.2dB and 0.8dB at BER of $1{\times}10^{-4}$ when input back-off (IBO) of HPA is -1.0dB and -3.0dB, respectively. For the same channel environment with multi-channel, 1DD-CEFSK outperforms 1DD-GFSK by 1.1dB in SNR, regardless of the value of IBO.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.53-62
• /
• 2004

In this study, an improved post-processing technique for correcting MRI artifact due to the unknown respiratory motion in the imaging plane is presented. Respiratory motion is modeled by a two-Dimensional linear expending-shrinking movement. Assuming that the body tissues are incompressible fluid like materials, the proton density per unit volume of the imaging object is kept constant. According to the introduced model, respiratory motion imposes phase error, non-uniform sampling and amplitude modulation distortions on the acquired MRI data. When the motion parameters are known or can be estimatead a reconstruction algorithm based on biliner superposition method was used to correct the MRI artifact. In the case of motion parameters are unknown, first, the spectrum shift method is applied to find the respiratory fluctuation function, x directional expansion coefficient and x directional expansion center. Next, y directional expansion coefficient and y directional expansion center are estimated by using the minimum energy method. Finally, the validity of this proposed method is shown to be effective by using the simulated motion images.

• Proceedings of the KSPS conference
• /
• 2007.05a
• /
• pp.143-145
• /
• 2007

Muscle groups that are located in and around the vocal tract can produce audible changes in frequency and/or intensity of the voice. Vocal vibrato is a characteristic feature in the singing of performers trained in the western classical tradition and vibrato is generally considered to result from modulation in frequency amplitude and timbre. Vocal tremor is also characterized by periodic fluctuations in the voice frequency or intensity and vocal tremor is symptom of a neurological disease as Spasmodic dysphonia , Parkinson's disease. Vocal vibrato and Vocal tremor may have many of the same origins and mechanisms in the voice production systems. The purpose of this study is to find acostic character of Korean traditional song Pansori singer's vibrato and Spasmodic dysphonia patient's vocal tremor. twelve Pansori singers and seven Spasmodic dysponia patients participated to this study. Power spectrum and Real time Spectrogram are used to analyze the acoustic characteristics of Pansori singing and Spasmodic dysphonia patient's voice The results are as follows; First, vowel formant differences between Pansori singing and Spasmodic dysphonia patient's voice are higher F1, F3. Second, The vibrato rate show differences between Pansori singing and Spasmodic dysphonia patients;$4^{\sim}6/sec$ and $5{\sim}6/sec$ Vibrato rate of pitch is 5.7 Hz ${\sim}$ 42.4 Hz for Pansori singing , 3.8 Hz ${\sim}$ 27.9 Hz for Spasmodic dysphonia patients ;Vibrato rate of intensity range is 0.07 dB ${\sim}$ 8.26 dB for Pansori singing and 0.07 dB ${\sim}$ 4.81 dB for Spasmodic dysphonia patients

• Journal of Animal Environmental Science
• /
• v.8 no.2
• /
• pp.63-72
• /
• 2002

In Korea, a need of automatic dairy farm management system has been increased to lower production cost and to strengthen international competition. However, the present management system was mostly relied on foreign technologies and caused some problems in post management and after-sales services. Therefore, though there is a problem of price and quality at present, domestic technologies of the management system should be developed for the long run. This study was conducted to develop an electronic identification unit for an automatic dairy farm management system. The developed system was consisted of a tag, a reader, a switching circuit, and a personal computer. The tag attachable to each individual cow was developed to transmit individual radio frequency(RF) code into the air with modulation of ASK(amplitude shift keying). And the switching circuit was added to avoid confusion on reception and transmittance. The reader attached to a feeding device was developed to transmit activating signal periodically and to identify code of the individual tag when the tag was approached to the device. The reader was consisted of an active filter, a detecter, a comparator and a microcontroller. The test result was feasible enough to apply it for the automatic farm management system and the identified maximum distance was about 37cm.

• Journal of Convergence for Information Technology
• /
• v.10 no.5
• /
• pp.30-35
• /
• 2020

In this paper, we analyzed the tracking error for the monopulse radar by controlling the phase difference, amplitude ratio and engagement angle of the cross-eye jammer. Cross-eye jamming is an important jamming method for monopulse radars, which causes a displacement in the radar receiving antenna input and misleads the radar's tracking angle. As a result of analyzing the tracking distance error of the radar while changing the engagement angle between the monopulse radar and jammer, the maximum distance error occurs when the engagement angle is 0° and the phase difference is 180°. It was confirmed that the error decreased to 70% or less of the maximum distance error into 45°~135°. In order to increase the efficiency of jammers, it is necessary to study rotary jammers or multi-channel jammers. This study will be very useful for the design of cross-eye jammers for aircraft and ships.

• Journal of Sensor Science and Technology
• /
• v.6 no.2
• /
• pp.95-105
• /
• 1997

A new open-loop signal processing technique of digital phase tracking is known to have a Potential to solve the problems in the open-loop processor such as limited dynamic range, dependence on the optical intensity fluctuations, and dependence on gain fluctuations of signal path. But new problems with digital phase tracking must be solved before it can be a useful signal processing method. In this paper, barriers to the success of the digital phase tracking such as harmonics content, phase difference, amplitude variations of the phase modulation(PM) signal, bandwidth limit of the signal path, and the implementation of the mixer, are pointed out and their effects on the performance of the signal processor are analyzed to calculate the requirements of the signal processor for $1{\mu}rad$-grade FOG.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.6
• /
• pp.9-16
• /
• 2000

The perception of flicker on the computer display devices depends upon the temporal waveform of the phosphor decay characteristic, the frame rate, and the display size. The lowest frequency at which flicker is not perceived is called the critical fusion frequency or critical frequency. Critical fusion frequency is evaluated by the display illuminance and the modulation (m) defined as the ratio of the amplitude of first harmonic frequency to the DC of the waveform. In this paper, we analyze the relationship bet ween the critical fusion frequency, relating to the decay characteristic of the phosphors and luminance on the monitor, and the frame frequency. Also under considering the viewing angle, we presented the frame frequency that is less sensitive to the full size of the display device.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.7
• /
• pp.671-676
• /
• 2016

This study is about design for the Rotational Instrument of the Industry factory which is used management safety and maintenance. We developed the multichannel vibration monitering system of the self-diagnosis for middle level CMS(Condition Monitoring System) market, and that system are new features to the expandability and flexibility. Normally one channel is used for treating one signal, but developed instrument can treat four channel with one signal processing card. One rack have redundant power supply and displace and it can check vibration measurement value in field without computer. Bearing fault detection is fundamental of vibration surveillance, but sometimes can not check with vibration velocity and acceleration. So it need the filtering and the amplitude modulation on the acceleration enveloping technology when irregular vibration is happened. We developed the vibration analysis instrument which is applied such technology. And the development prototype shows activated within the vibration error limit.