• 제목/요약/키워드: Ammonia gas

검색결과 717건 처리시간 0.024초

Thick-film ammonia gas sensor with high sensitivity and excellent selectivity

  • Lee, Kyuchung;Ryu, Kwang-Ryul;Hur, Chang-Wu
    • Journal of information and communication convergence engineering
    • /
    • 제2권1호
    • /
    • pp.22-25
    • /
    • 2004
  • A highly sensitive ammonia gas sensor using thick-film technology has been fabricated and examined. The sensing material of the gas sensor is FeOx-$WO_{3}-SnO_{2}$ oxide semiconductor. The sensor exhibits resistance increase upon exposure to low concentration of ammonia gas. The resistance of the sensor is decreased, on the other hand, for exposure to reducing gases such as ethyl alcohol, methane, propane and carbon monoxide. A novel method for detecting ammonia gas quite selectively utilizing a sensor array consisting of an ammonia gas sensor and a compensation element has been proposed and developed. The compensation element is a Pt-doped $WO_{3}-SnO_{2}$gas sensor which shows opposite direction of resistance change in comparison with the ammonia gas sensor upon exposure to ammonia gas. Excellent selectivity has been achieved using the sensor array having two sensing elements.

돈사내 암모니아가스 계측시스템 개발 (Development of a Measurement System for Ammonia Gas in Swine Housing)

  • 방승훈;장동일;장홍희;임영일
    • Journal of Biosystems Engineering
    • /
    • 제23권4호
    • /
    • pp.359-364
    • /
    • 1998
  • A PC based measurement system was developed and it consisted of ammonia sensor(TS-1000), AMP & MUX Board, A/D Converter, and personal computer. The results obtained from the study are summarized as follows : 1. The relationship of outputs(V) of ammonia sensor(AS) and concentrations(ppm) of ammonia gas was analyzed by the linear regression analysis and the output values were very accurate when compared with standard ammonia gas. 2. The test results showed that the performance of ammonia gas sensor was not 31B3c1e4 by temperatures and humidities 3. The developed ammonia gas measurement system was proved to be practically uesful for measuring concentrations of ammonia gas in pig housing.

  • PDF

Aqeous Neutralizer as Reactive Solvents for Odorous Ammonia Removal

  • Park, Young-G.
    • Environmental Engineering Research
    • /
    • 제13권3호
    • /
    • pp.119-124
    • /
    • 2008
  • Ammonia is an inorganic compound that may cause severe odor problem. In this study the effectiveness of applying natural neutralizer to destroy and remove the odor-causing compound from gas streams was studied. Experimental result evaluated with a bench-scale apparatus via the neutralization of gas phase. This indicates that the natural neutralization depends on the gas concentration, gas residence time, temperature and pH. Removal efficiency of ammonia from gas stream was achieved by 95% using theconvection in the packed bed. This study proved the chemical neutralization technology was effective for controlling inorganic odor-causing compound.

소량의 질소를 포함한 천연가스 수증기 개질 반응에서 GHSV 변화에 따른 암모니아 생성 반응에 관한 연구 (A Study on Ammonia Formation with Nitrogen Impurity at a Natural Gas Steam Reforming Catalytic Process)

  • 김철민;박상현;이주한;이상용
    • 한국수소및신에너지학회논문집
    • /
    • 제30권6호
    • /
    • pp.601-607
    • /
    • 2019
  • Ammonia would be formed in natural gas containing small amount of nitrogen reforming process in the process natural gas, which might damage the Pt catalyst and Prox catalyst. In the article, the effect of nitrogen contents on the formation of ammonia in the reforming process has been studied. In the experiments, Ru based and Ni based catalysts were used and the concentration of ammonia in the reformate gas at various gas hourly space velocity was measured. Experimental result shows that relatively higher ammonia concentration was measured with Ru based catalyst than with Ni based catalyst. It also shows that the concentration of ammonia increased rapidly after most of the methane converted into hydrogen. Based on the experimental results to reduce ammonia concentration it might be better to finish methane conversion at the exit position of the reforming reactor to minimize the contact time of catalyst and nitrogen with high concentration of hydrogen.

침엽수를 이용한 암모니아 가스 제거효율 연구 (Study of ammonia-gas removal′s characteristics using wood-material)

  • 박영규
    • 환경위생공학
    • /
    • 제19권2호
    • /
    • pp.7-14
    • /
    • 2004
  • This paper was investigated to clarify the possibility of ammonia-gas removal by essential oil. First of all, the chemical analysis was performed to analyze the composition of an essential oil by GC-MS. The monoterpenes in an essential oil react with ammonia by neutralization and their reaction mechanism was elucidated. Based on their chemical neutralized reaction, the removal efficiencies of ammonia gas were studied to derive the optimal conditions in the scrubber tower such as optimal temperature and pH. The experimental result shows that the removal efficiency of ammonia gas was achieved over 80 % by the misty aerosol dispersion of scrubber tower.

Dried Bacillus subtilis Culture Reduced Ammonia Gas Release in Poultry House

  • Santoso, U.;Ohtani, S.;Tanaka, K.;Sakaida, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권5호
    • /
    • pp.806-809
    • /
    • 1999
  • The present study showed the advantages of dried Bacillus subtilis culture (DBSC) supplementation on reducing ammonia gas release in the poultry house. In Experiment 1, 65-week-old Hyline W-36 hens were raised in individual wire-floor cages in a windowless house, and divided into two groups of 180 hens each. One group was fed diets without DBSC as the control and another group was fed a diet supplemented with 2% DBSC. In Experiment 2, 2-week-old broiler chicks were divided into 3 treatment groups of 20 chicks each and maintained in individual floor cages. One group was fed the diet without DBSC and other two groups were fed the diet supplemented with 1 or 2% DBSC, respectively. In experiment 1, DBSC consistently reduced ammonia gas release in the laying house (p<0.01) and manure storage facilities (p<0.01). incubation of feces for 1, 2, 3, 4, 5, 6, 24 or 48 hours showed that DBSC consistently reduced ammonia gas release. In Experiment 2, DBSC reduced ammonia gas release in the broiler house; however, DBSC had no effect on total N, urate-N and ammonia-N contents of feces, but it improved cumulative N utilization and decreased serum urea-N concentration when chicks when chicks were fed 1% DBSC.

중공사막 접촉기를 이용한 암모니아 물질전달 모델링 (Modeling of Ammonia Mass Transfer Using a Hollow Fiber Membrane Contactor)

  • 오대양;정주영;최원호;박주양
    • 상하수도학회지
    • /
    • 제25권4호
    • /
    • pp.503-510
    • /
    • 2011
  • Ammonia in water which is toxic to human, its concentration is regulated below 0.5 mg/L in drinking water. Current study aimed to develop appropriate models for ammonia stripping using hollow fiber membrane contactor. Two different models were developed during the study. Model 1 was assumed only free ammonia ($NH_3$) transfer in stripping process, whereas the Model 2 was assumed with total ammonia ($NH_3+{NH_4}^+$) transfer. Ammonium chloride ($NH_4CI$), sodium hydroxide(NaOH) were used to make ammonia solution, which was concentration of 25 mg as N/L at a pH of 10.5. The experimental conditions were such that, the liquid flow was in tube-side in upward direction and t he gas flow was on shell-side in downward direction a t room temperature. The experimental and modeling results showed that marginal difference were observed at low gas flux. However the difference between the both models and experimental value were increased when the gas flux was increased. The study concludes that the Model 1 with free ammonia is more appropriate when both models were compared and useful in ammonia stripping process at low gas flux.

Improvement in ammonia gas sensing behavior by polypyrrole/multi-walled carbon nanotubes composites

  • Jang, Woo-Kyung;Yun, Ju-Mi;Kim, Hyung-Il;Lee, Young-Seak
    • Carbon letters
    • /
    • 제13권2호
    • /
    • pp.88-93
    • /
    • 2012
  • Polypyrrole (PPy)/multi-walled carbon nanotubes (MWCNTs) composites were prepared by in situ polymerization of pyrrole on the surface of MWCNTs templates to improve the ammonia gas sensing properties. PPy morphologies, formed on the surface of MWCNTs, were investigated by field emission scanning electron microscopy. The thermal stabilities of the PPy/MWCNTs composites were improved as the content of MWCNTs increased due to the higher thermal stability of the MWCNTs. PPy/MWCNTs composites showed synergistic effects in improving the ammonia gas sensing properties, attributed to the combination of efficient electron transfer between PPy/MWCNTs composites and ammonia gas, and the reproducible electrical resistance variation on PPy during the gas sensing process.

후막형 암모니아 가스 센서의 제조 및 가스 감응 특성 (Fabrication and Characterization of Thick Film Ammonia Gas Sensor)

  • 윤동현;권철한;홍형기;김승렬;이규정
    • 센서학회지
    • /
    • 제6권6호
    • /
    • pp.445-450
    • /
    • 1997
  • 후막형 암모니아 가스센서를 제조하여 가스 감지특성을 조사하였다. 저농도의 암모니아 가스에 감도가 우수한 산화물 반도체 감지물질은 $FeO_{x}-WO_{3}-SnO_{2}$ 이었으며 100 ppm 이하의 암모니아 가스에 노출될 때 감지막의 저항이 증가하는 특이한 경향을 나타내었다. 반면 암모니아 외의 일반적인 환원성 가스에 노출될 때는 저항이 감소하는 경향을 보였다. 이러한 암모니아 가스 감지소자와 감지물질이 Pt-doped $WO_{3}-SnO_{2}$ 로 구성된 보상소자를 결합하여 센서어레이를 제조하였으며 그 특성을 조사하였다. 보상소자는 암모니아 가스와 일반적인 환원성 가스모두에 의해 저항이 감소하는 경향이 있다. 센서 어레이는 감지소자와 보상소자를 하나의 기판위에 형성하여 제조되었으며 우수한 선택성을 얻을 수 있었다. 이러한 개념의 센서어레이를 이용하면 가스센서의 선택성 향상을 기할 수 있음을 확인할 수 있었다.

  • PDF

기체투과막을 이용한 암모니아성 질소 회수방안 (Recovery of Ammonia Nitrogen using Gas-permeable Membranes)

  • 이상훈;채상엽
    • 멤브레인
    • /
    • 제32권3호
    • /
    • pp.191-197
    • /
    • 2022
  • 기체투과막 기술을 이용하여 가축분뇨 폐기물 등으로부터 암모니아성 질소를 효과적으로 회수할 수 있다. 이는 폐기물 내 암모니아 기체가 폐기물에 함침된 기체투과막의 미세공극을 투과하여 막반대편에 도달하게 된다. 투과된 암모니아 기체분자는 막 반대편에 존재하는 용액 내 황산 등 산에 의해 포획 및 회수된다. 막 유입부 내 암모니아성 질소 제거 효과를 높이기 위해서는 우선 유입 폐기물 내 pH를 높게 유지해야 하는데 pH 상승에 필요한 염기성 약품 투입비용이 문제가 될 수 있다. 기존 연구에서는 보다 저렴한 소석회 투입하거나 폭기 혹은 질산화억제를 통해 높은 pH를 효과적으로 유지시키는 방안이 거론되고 있다. 한편 암모니아성 질소 회수에 쓰이는 기체투과막의 재질은 적절한 내열성이나 내화학성 이외에도 소수성을 띈다는 특징이 있으며 이를 통해 막기공을 통해 암모니아 기체를 선택적으로 투과시킬 수 있다. 향후 연구에서는 다양한 성상을 가진 현장 폐기물을 이용하여 실증 Test를 수행하고 이를 기반으로 최적 설계/운전 조건 규명 및 경제성 제고 방안을 수립하여야 한다.