• 제목/요약/키워드: Amine additives

검색결과 34건 처리시간 0.029초

티오카바메이트 그룹을 함유하는 올레인산 에스테르계 내마모제의 합성 (Synthesis of Oleic Acid Esters containing Thiocarbamate Group as Anti-wear Additives)

  • 황도혁;김영운;정근우;양태균
    • 공업화학
    • /
    • 제19권1호
    • /
    • pp.51-58
    • /
    • 2008
  • 내마모제로 사용하기 위하여 mercaptobenzothiazole 및 디알킬렌디티오카바메이트 그룹을 함유하는 환경친화적인 올레인산 에스테르를 디알킬아민과 이황화탄소의 치환반응, 디클로로아세톤과의 치환반응, $NaBH_4$을 사용한 환원반응 및 올레인산과의 축합반응 등의 과정을 행하여 90% 이상의 수율로 합성하였다. 중간 생성물 및 내마모제의 구조적 특성은 FT-IR, $^1H$-NMR 스펙트럼 및 원소분석으로 분석하였으며 광유계 오일(100 N) 및 식물유에서의 용해성을 1 중량%에서 평가한 결과 잘 용해되었다. 또한, 합성한 내마모제의 열 안정성을 TGA로 분석하였으며 초기 5 wt% 분해온도가 구조에 따라 $192^{\circ}C$에서 $217^{\circ}C$의 안정성을 나타내었다. CEC L-33-A-93 방법으로 생분해도를 평가한 결과 89%에서 99%의 생분해도를 나타내어 환경친화적인 내마모제임을 확인하였다. 내마모제의 윤활특성을 100 N 윤활기유 및 식물유에 첨가하여 4구 마모시험기를 사용하여 평가한 결과, 100 N BO에서 4-ball 마모흔의 직경은 Bz-thia-OE < C4-DTC-OE < Pyrro-DTC-OE < C8-DTC-OE의 순으로 큰 값을 나타내어 내마모성능이 나쁘게 나타났다. 한편, 식용유에서는 4-ball 마모흔의 직경이 0.8260 mm에서 0.9637 mm를 나타내어 내마모제의 첨가효과가 나타나지 않았다.

조강형 첨가제 사용에 따른 저온환경에서의 3D 프린팅 콘크리트의 압축강도 특성 (Compressive Strength Characteristics of 3D Printing Concrete in Low Temperature Environment by Using Early Strength Improvement Type Additive)

  • 유병현;이동규;박종필;황병일
    • 한국산학기술학회논문지
    • /
    • 제21권10호
    • /
    • pp.386-392
    • /
    • 2020
  • 3D 프린팅 콘크리트는 연속 적층 시 적층고가 높아짐에 따라 콘크리트의 자중이 증가되기 때문에 연속 적층성 확보를 위해 하단부 콘크리트가 적정 시간에 경화되어야 한다. 특히, 기온이 낮은 동절기의 경우 콘크리트의 경화속도가 늦어지게 되는데, 3D 프린팅 콘크리트 시공 중 하단부 콘크리트의 강도발현이 낮아 콘크리트의 자중을 버티지 못하게 되면 적층된 콘크리트가 무너지게 되는 문제가 발생된다. 이러한 문제점을 해결하기 위해서는 저온환경에서의 3D 프린팅 콘크리트의 초기강도를 증진이 필수적이다. 국내외 문헌에서는 Amine계, Nitrate계, Sodium계, Calcium계 등의 무기계 화학 첨가제를 사용하여 콘크리트의 초기강도를 증진시킨 사례가 보고되고 있다. 이에 본 연구에서는 Amine계, Nitrate계 및 Sodium계 조강형 첨가제 샘플 5종을 제작하여 그 성능을 평가하였고, 우수한 성능을 보인 샘플을 선별하여 이를 적용한 3D 프린팅 콘크리트의 초기강도 특성을 확인하였다. 그 결과 Nitrate계 첨가제 사용 시 10 ℃ 환경에서 기존 20 ℃ 환경의 3D 프린팅 콘크리트 배합대비 동등 이상의 초기강도 발현이 가능한 것을 확인할 수 있었다.

저온잠열저장을 위한 TMA-물계 포접화합물의 냉각특성에 대한 연구 (A Study on Cooling Characteristic of TMA-Water Clathrate Compound for Low Temperature Latent Heat Storage)

  • 김창오;김진흥;정낙규
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.2471-2475
    • /
    • 2007
  • Clathrate compound is the material that host in hydrogen bond forms cage and guest is included into it and combined. Crystallization of hydrate is generated at higher temperature than that of ice from pure water. And physical properties according to temperature are stable and congruent melting phenomenon is occurred without phase separation. But clathrate compound still had supercooling problem occurred in the course of phase change and supercooling should be minimized because it affects efficiency of equipment very much. Therefore, various studies on additives to restrain this or heat storage methods are needed. In this study was investigated the cooling characteristics of the TMA-water clathrate compound including TMA (Tri-methyl-amine, $(CH_3)_3N)$ of 20${\sim}$25 wt% as a low temperature latent heat storage material. And ethanol$(CH_3CH_2OH)$ was added and its cooling characteristics were studied experimentally to restrain supercooling of TMA-water clathrate compound.

  • PDF

Study on the Performance Characteristics of Centrifugal Pump with Drag-reducing Surfactant Additives

  • Wang, Lu;Li, Feng-Chen;Dong, Yong;Cai, Wei-Hua;Su, Wen-Tao
    • International Journal of Fluid Machinery and Systems
    • /
    • 제4권2호
    • /
    • pp.223-228
    • /
    • 2011
  • The performance characteristics of centrifugal pump were measured experimentally when running with tap water and drag-reducing surfactant (Octadecyl dimethyl amine oxide (OB-8)) solutions. Tests have been performed on five cases of surfactant solutions with different concentrations (0ppm (tap water), 200ppm, 500ppm, 900ppm and 1500ppm) and four different rotating speeds of pump (1500rpm, 2000rpm, 2500rpm and 2900rpm). Compared with tap water case, the experimental results show that the total pump heads for surfactant solution cases are higher. And the pump efficiency with surfactant solutions also increases, but the shaft power for surfactant solutions cases decreases compared to t hat for tap water. There exists an optimal temperature for surfactant solutions, which maximizes the pump efficiency.

A Highly Sensitive Determination of Bulk Cu and Ni in Heavily Boron-doped Silicon Wafers

  • Lee, Sung-Wook;Lee, Sang-Hak;Kim, Young-Hoon;Kim, Ja-Young;Hwang, Don-Ha;Lee, Bo-Young
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권7호
    • /
    • pp.2227-2232
    • /
    • 2011
  • The new metrology, Advanced Poly-silicon Ultra-Trace Profiling (APUTP), was developed for measuring bulk Cu and Ni in heavily boron-doped silicon wafers. A Ni recovery yield of 98.8% and a Cu recovery yield of 96.0% were achieved by optimizing the vapor phase etching and the wafer surface scanning conditions, following capture of Cu and Ni by the poly-silicon layer. A lower limit of detection (LOD) than previous techniques could be achieved using the mixture vapor etching method. This method can be used to indicate the amount of Cu and Ni resulting from bulk contamination in heavily boron-doped silicon wafers during wafer manufacturing. It was found that a higher degree of bulk Ni contamination arose during alkaline etching of heavily boron-doped silicon wafers compared with lightly boron-doped silicon wafers. In addition, it was proven that bulk Cu contamination was easily introduced in the heavily boron-doped silicon wafer by polishing the wafer with a slurry containing Cu in the presence of amine additives.

도로포장 구조물에서의 스트리핑 현상과 스트리핑 방지제의 이용방안 (Stripping of Asphalt Pavements and Antistripping Addities)

  • 윤현희
    • 대한교통학회지
    • /
    • 제8권2호
    • /
    • pp.119-131
    • /
    • 1990
  • 물 또는 습기에 의하여 도로포장 구조물의 아스팔트와 자갈(aggregate)사이의 결합력이 손실되어 아스팔트가 자갈로부터 분리되는 현상 즉 스트리핑(stripping)에 의하여 많은 도로포장이 파괴되고 있다. 이러한 스트리핑 현상을 방지하기 위하여 여러가지 방법이 개발 사용되고 있는데 흔히 스트리핑 방지제(antistripping additive)를 아스팔트에 섞어서 사용하고 있다. 본 연구의 목적은 스트리핑 현상의 원인을 규명하고 이것을 바탕으로 효율적인 스트리핑 방지제의 조건과 사용방법을 제시하는 것이다. 도로포장용 자갈의 물리화학적 성질을 관찰하여 스트리핑과의 관계를 검토한 결과 스트리핑 현상은 아스팔트와 자갈 사이의 전기적 반발력에 의해 일어날 수 있으며, 자갈 표면의 전기화학적 성질이 스트리핑에 중요한 역할을 함을 알 수 있었다. 또한 현재 사용되고 있는 스트리핑 방지제는 IR 분석결과 대부분이 아민(amine) 계통의 양이온 계면활성제 이었다. 이러한 스트리핑 방지제는 0.5에서 1.0%정도 아스팔트에 섞어서 사용하면 스트리핑을 현저히 줄일 수 있으나, 장시간 (약 24 시간 이상) 뜨거운 상태에서 방치하면 그 성능이 감소되는 것을 알 ? 있었다.

  • PDF

목재의 기상열화 방지에 관한 최근의 연구 동향 (Current Researches on the Protection of Exterior Wood from Weathering)

  • Kim, Yeong-Suk
    • Journal of the Korean Wood Science and Technology
    • /
    • 제46권5호
    • /
    • pp.449-470
    • /
    • 2018
  • 본 총설에서는 외부에 사용되는 목재를 풍화인자로부터 보호하기 위해 실행되고 있는 최근의 연구동향에 대해 조사 분석하였다. 주요 기상열화 인자로부터 목재의 표면 보호를 위한 연구 동향에 대하여 조사한 결과 다음과 같은 결론을 얻었다. 목재보존제로 사용된 크롬, 구리 등의 무기화합물이 목재를 기상열화로부터 보호할 수 있는 것으로 보고되었다. 또한 ACQ처리 목재의 표면에 wax나 oil같은 소수성물질과 UV 흡수제, HALS(Hindered Amine Light Stabilizers) 등을 방부목재 표면에 precoating하면 기상열화 저항성을 강화할 수 있다고 보고되었다. 또한 방부목재 표면에 불투명 도막형성의 페인트/스테인 및 반투명스테인등이 기상열화방지에 대한 시너지 효과가 높힐수 있다는 보고들이 다수 있었다. 또한 방부목재의 표면보호를 위한 재도장 처리의 필요성이 시사되었다. 투명성의 도막에 UV방지를 위한 첨가물로서 미세입자의 ZnO 또는 $TiO_2$, Co, Cr, Fe, Mn, Ni과 Ti 등의 금속이온, Tris-resorcinol triazine derivatives, triazine 및 Benzotriazole과 같은 UV흡수제 등이 소개되었다. Methylation, acetylation 또는 alkylation 등과 같이 화학적으로 개질된 경우에는 이로 인한 중량증가가 높은 경우 기상열화 방지효과가 상승된다는 연구들이 소개되었다, 열처리목재의 기상열화 저항성에 대해서는 여러 가지 상반되는 연구보고 들이 있었고, UV저항성을 지닌 도장의 필요성이 강조된 보고가 있어 보다 심도 있는 연구의 필요성이 시사되었다.

Effect of γ-Aminobutyric Acid (GABA) Producing Bacteria on In vitro Rumen Fermentation, Biogenic Amine Production and Anti-oxidation Using Corn Meal as Substrate

  • Ku, Bum Seung;Mamuad, Lovelia L.;Kim, Seon-Ho;Jeong, Chang Dae;Soriano, Alvin P.;Lee, Ho-Il;Nam, Ki-Chang;Ha, Jong K.;Lee, Sang Suk
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제26권6호
    • /
    • pp.804-811
    • /
    • 2013
  • The effects and significance of ${\gamma}$-amino butyric acid (GABA) producing bacteria (GPB) on in vitro rumen fermentation and reduction of biogenic amines (histamine, methylamine, ethylamine, and tyramine) using corn meal as a substrate were determined. Ruminal samples collected from ruminally fistulated Holstein cows served as inoculum and corn was used as substrate at 2% dry matter (DM). Different inclusion rates of GPB and GABA were evaluated. After incubation, addition of GPB had no significant effect on in vitro fermentation pH and total gas production, but significantly increased the ammonia nitrogen ($NH_3$-N) concentration and reduced the total biogenic amines production (p<0.05). Furthermore, antioxidation activity was improved as indicated by the significantly higher concentration of superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) among treated samples when compared to the control (p<0.05). Additionally, 0.2% GPB was established as the optimum inclusion level. Taken together, these results suggest the potential of utilizing GPB as feed additives to improve growth performance in ruminants by reducing biogenic amines and increasing anti-oxidation.

Material Properties of Ni-P-B Electrodeposits for Steam Generator Tube Repair

  • Kim, Dong Jin;Seo, Moo Hong;Kim, Joung Soo
    • Corrosion Science and Technology
    • /
    • 제3권3호
    • /
    • pp.112-117
    • /
    • 2004
  • This work investigated the material properties of Ni-P-B alloy electrodeposits obtained from a Ni sulfamate bath as a function of the contents of the P and B sources($H_3PO_3$ and dimethyl amine borane complex(DMAB), respectively) with/without additives. Chemical composition, residual stress, microstructure and micro hardness were investigated using ICP(inductively coupled plasma) mass spectrometer, flexible strip, XRD, TEM and micro Vickers hardness tester, respectively. From the results of the compositional analysis, it was observed that P and B are incorporated competitively during the electrodeposition and the sulfur from the additive is codeposited into the electrodeposit. The measured residual stress value increased in the order of Ni, Ni-P, Ni-B and Ni-P-B electrodeposits indicating that boron affects the residual tensile stress greater than phosphorus. As the contents of the alloying element sources of P and B increased, crystallinity and the grain size of the electrodeposit decreased. The effect of boron on crystallinity and grain size was also relatively larger than the phosphorus. It can be explained that the boron with a smaller atomic radius contributes to the increase of residual stress in the tensile direction and the larger restraining force against the grain growth more significantly than the phosphorus with a larger atomic radius. Introduction of an additive into the bath retarded crystallization and grain growth, which may be attributed to the change of the grain growth kinetics induced by the additive adsorbed on the substrate and electrodeposit surfaces during electrodeposition.

아스팔트 혼합물의 내수분손상 향상에 대한 박리방지제의 효과 (Effect of Antistripping Agent on the Enhancement of Resistance to Moisture Damage of Asphalt Mixture)

  • 이은경;최세영
    • 접착 및 계면
    • /
    • 제10권4호
    • /
    • pp.182-190
    • /
    • 2009
  • 본 연구에서는 아스팔트 혼합물의 수분 손상을 감소시키기 위한 박리방지제 효과에 대하여 고찰하였다. 아스팔트 박리방지제는 tetraethylene pentamine (TEPA), Triethylenetetramine (TETA), 그리고 bis(hexamethylene)-triamine (BHMT) 각각과 포름알데히드의 축합반응에 의하여 합성하였다. 또한 스테아르산 또는 팔미트산과 금속 수산화물과의 반응을 통하여 금속계 박리방지제를 합성하였다. 박리방지제가 첨가된 아스팔트 혼합물의 기계적 특성은 마샬안정도, 수침잔류안정도 및 피막률에 대하여 분석하였다. 본 연구에서 합성된 박리방지제는 아스팔트 혼합물의 수분손상을 감소시켰다. 특히 BHMT계 및 C/S (Calcium stearate hydroxide) 박리방지제가 가장 높은 수침잔류 안정도 및 피막률을 보였다. 왜냐하면 각각 아민농도의 증가, 그리고 금속계면활성제의 효과적 역할로 인하여 BHMT 박리방지제와 C/S 박리방지제는 아스팔트와 골재 사이의 접착력을 향상시켜 주었기 때문이다.

  • PDF