• Journal of Animal Science and Technology
• /
• v.55 no.6
• /
• pp.489-500
• /
• 2013

Daily milk yields on test days were estimated using morning or afternoon partial milk yields collected by official agencies and the accuracy of the estimates was determined. Test-day data for milk yields consisted of 3,156,734 records of AM/PM partial milking measurements of 255,437 milking Holstein cows from 3,708 farms collected from December 2008 to April 2013. A linear regression model (LRM) was applied to estimate daily milk yields using alternate AM/PM milk yield records within lactation stages, milking intervals, and parities on every daily milk yield. The alternate statistical approach was a non-linear hierarchical model (NHM) in which Brody's growth function was implemented by reflecting an animal's physiological milk production cycle. When compared with LRM, daily milk yields predicted by the NHM were assumed to be functionally related to day in milk (or lactation) stage, milking intervals, and partial milk yields. Since the results were in terms of accuracies based on comparisons of different statistical models, accuracies of estimates of daily milk yields by NHM were close to those determined by the LRM. The average of these accuracies was 0.94 for AM partial milk yields and 0.93 for PM partial milk yields for first calving cows. However, the accuracies of AM/PM milk yield estimations from cows under a calving stage higher than the first parity were 0.96 and 0.95, respectively. Correlations between the estimated daily milk yields and the actual daily milk yields ranged from 0.96~0.98. These accuracies were lower for unbalanced AM/PM milking intervals and the first calving cows. Overall, prediction of daily milk yields by NHM would be more appropriate than by LRM due to its flexibility under different milk yield-related circumstances, which provides an idea of the functional relationship between milking intervals and days in milk with daily milk yields from statistical viewpoints.

• Journal of Korea Foundry Society
• /
• v.31 no.1
• /
• pp.11-17
• /
• 2011

The effect of CaO addition to AM60B Mg alloy on tensile properties has been investigated, with focus on strength and ductility at room and elevated temperatures. The 0.25-0.65wt% CaO added AM60B Eco-Mg diecastings were prepared by high pressure die casting using Buhler 1,450-ton cold chamber machine without $SF_6$ and $SO_2$ gases. The microstructures and tensile properties of each alloy were tested. The results show that the grains of AM60B are refined and the mechanical properties increase with CaO addition at room temperature. The improvement of strength and ductility is prominent at 0.45-0.55wt% CaO addition. Also, improved mechanical properties are maintained at elevated temperature of $150^{\circ}C$. CaO addition results in $Al_2Ca$ phase formation mostly on the grain boundaries. This phase leads to the refinement of grain structures and improvement of ductility as well as strength. The suppression of ${\beta}-Mg_{17}Al_{12}$ phase as well as the decrease of fracture surface porosity and other casting defects caused by melt cleanliness also contribute to the enhancement of mechanical properties of AM60B Eco-Mg at room and elevated temperature.

• Journal of Acupuncture Research
• /
• v.31 no.3
• /
• pp.7-18
• /
• 2014

Objectives : The purpose of this study is to find parameters to compare the effects of Sa-Am acupuncture with large intestine tonifying and sedating on radial pulse in healthy subjects. Methods : Sixty healthy subjects participated in this study, divided into large intestine tonifying acupuncture group, large intestine sedating acupuncture group and control group. Radial pulse was measured by 3 dimensional pulse imaging system(DMP-3000) before, right after, 30 minutes after and 60 minutes after acupuncture at Cun, Guan, and Chi in the acupuncture group and in the control group at the same time points. Results : 1. Angle of main peak and magnitude of fourier component significantly changed by integrated analysis of Cun, Guan and Chi. 2. Amplitude of H1, Pulse Power volume / min, elasticity, AIx / HR, Frequency and magnitude of fourier component significantly changed by analysis of Cun, Guan, and Chi. Conclusions : The effect of Sa-Am acupuncture with large intestine tonifying and sedating in healthy human may be observed on time, amplitude, pulse area, augmentation index and fourier components parameters. The parameters analysed in this study may be used to differentiate the effects between Sa-Am acupuncture with large intestine tonifying and sedating on radial pulse. Further studies on the effects of Sa-Am acupuncture using radial pulse are needed.

• Korean Journal of Acupuncture
• /
• v.23 no.3
• /
• pp.17-27
• /
• 2006

Objectives : This study is aimed to search for the effective application of the Sa-Am acupuncture(舍岩鍼法) for the treatment of diarrhea. Methods : The classification and the treatment for diarrhea in ${\ll}$Sa-Am-Do-In-Chim-Gu-Yo-Kyul(舍岩道人鍼灸要訣)${\gg}$ was compared with those of ${\ll}$Dong-Eui-Bo-Kham(東醫寶鑑)${\gg}$ and ${\ll}$Chim-Gu-Dae-Sung(鍼灸大成)${\gg}$ Results & Conclusions : In ${\ll}$Dong-Eui-Bo-Kham(東醫寶鑑)${\gg}$, diarrhrea was classified into 20 classes and mainly treated with herbal medicine and additionally with acupuncture treatment. Ashi (nearby) points in lower abdomen and sacral region were often used as well as the points on Spleen meridian(SP) and Stomach meridian(ST) to treat diarrhea in ${\ll}$Chim-Gu-Dae-Sung(鍼灸大成)${\gg}$ According to ${\ll}$Sa-Am-Do-In-Chim-Gu-Yo-Kyul(舍岩道人鍼灸要訣)${\gg}$, Diarrhrea was classified into 6 classes; wet diarrhrea (濡泄; kidney damage), abrupt diarrhrea (暴泄; spleen damage), damp diarrhrea (濕泄; stomach damage), fire diarrhrea (火泄; heart dryness), ki(qi) diarrhrea (氣泄; lung damage) and cold diarrhrea (冷泄; liver damage). Sa-Am acupuncture seems to be applied on the basis of more precise diagnoses of organs and meridians and provide with more fundamental treatments in comparison with classical acupuncture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2261-2266
• /
• 2009

A novel adaptive phase calibration method is proposed for nonlinear amplifiers. Based on the adaptive process of simple phase vector calculations, the AM/PM distortion can be significantly reduced for various input power. The performance of the proposed method is evaluated for up to 80 % improvements in AM/PM distortions, compared with the distortion of a conventional amplifier. Moreover, by means of an additional envelope-compensation technique, the improvement of the adjacent channel power ratio (ACPR) is presented.

• The Korea Journal of Herbology
• /
• v.36 no.4
• /
• pp.23-30
• /
• 2021

Objectives : The purpose of this study was to investigate the antioxidant activities and nitric oxide (NO) production in RAW 264.7 macrophages in extract of Alisma orientale Juzep (EAOJ) and fermented extract (FAOJ) by Paenibacillus kribbensis AM49 (P. kribbensis AM49). Methods : The Alisma orientale Juzep was fermented with P. kribbensis AM49 at 37℃ for 72 hours. We measured total polyphenol and total flavonoid, DPPH radical scavenging activity, FRAP activity and reducing power by spectrometric assay in EAOJ and FAOJ at concentrations at 0.5, 1, 5, 10 mg/㎖. Positive control was used ascorbic acid. Furthermore, we examined effect of EAOJ and FAOJ on the cell viability and NO production in RAW 264.7 macrophages. Results : The total polyphenol and total flavonoids content of FAOJ were increased 9.16 mg/g, 2.59 mg/g to 12.58 mg/g, 3.45 mg/g. DPPH radical scavenging activity, FRAP activity and reducing power were dose dependently increased according to the treatment concentration (0.5, 1, 5, 10 mg/㎖) of EAOJ and FAOJ. In particular, DPPH radical scavenging activity, FRAP activity of FAOJ was significantly increased at 5, 10 mg/㎖. Reducing power of FAOJ at 10 mg/㎖ was similar to ascorbic acid at 0.1 mg/㎖. In addition, the cell viability and NO production in RAW 264.7 macrophages were significantly increased at the concentrations of 250, 500, 1000 ㎍/㎖. Conclusions : These results suggest that FAOJ by P. kribbensis AM49 has effects to antioxidant activity. In addition, the cell viability and NO production in RAW 264.7 macrophages were significantly increased.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.1
• /
• pp.48-54
• /
• 2019

PURPOSE. The aim of the present randomized controlled study was to compare prefabricated all-ceramic, anatomically shaped healing abutments followed by all-ceramic abutments and all-ceramic crowns and prefabricated standard-shaped (round-diameter) titanium healing abutments followed by final titanium abutments restored with porcelain-fused-to-metal (PFM) implant crowns in the premolar and molar regions. MATERIALS AND METHODS. Forty-two patients received single implants restored either by all-ceramic restorations (test group, healing abutment, final abutment, and crown all made of zirconia) or conventional titanium-based restorations. Immediately after prosthetic incorporation and after 12 months of loading, implant survival, technical complications, bone loss, sulcus fluid flow rate (SFFR) as well as plaque index (PI) and implant stability (Periotest) were analyzed clinically and radiologically. RESULTS. After 12 months of loading, an implant and prosthetic survival rate of 100% was observed. Minor prosthetic complications such as chipping of ceramic veneering occurred in both groups. No statistical significant differences were observed between both groups with only a minimum of bone loss, SFFR, and PI. CONCLUSION. All-ceramic implant prostheses including a prefabricated anatomically shaped healing abutment achieved comparable results to titanium-based restorations in the posterior region. However, observational results indicate a benefit as shaping the peri-implant soft-tissue with successive provisional devices and subsequent compression of the soft tissue can be avoided.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.188-195
• /
• 2021

In recent years, additive manufacturing (AM) processes have emerged as an important manufacturing technology for a multi-item small sized production to lead the 4th industrial revolution. The layer-by-layer deposition characteristics of AM process can rapidly produce physical parts with three-dimensional geometry and desired functionality in a relatively low cost environment. The goal of this paper is to investigate the applicability of AM process to appropriate technologies for developing countries. Through the review of examples of appropriate technology of the AM process, the possibility of a practical usage of the AM process for the appropriate technologies is examined. In addition, significant applications of the AM process to the appropriate technology are introduced. Finally, future issues related to production of physical parts for developing countries using the AM process are discussed from the viewpoint of the appropriate technology.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.257-261
• /
• 2022

Additive manufacturing (AM, also known as 3D printing) applied to the construction industry is implemented and verified for various effects since advantages such as high design freedom, improving worker safety, and predictable construction period. However, due to the low maturity compared to the existing technology, studies are underway to solve new problems that occur in the overall of AM technology. In this paper, we confirm the effect of low construction surface flatness on the stacked features in the process of on-site AM construction. In particular, unstable AM features are determined through quantitative analysis by laser scanning, and a construction strategy is proposed for the surface flattening.

• The Korean Journal of Physiology and Pharmacology
• /
• v.28 no.3
• /
• pp.219-227
• /
• 2024

Bladder cancer remains the 10th most common cancer worldwide. In recent years, metformin has been found to have potential anti-bladder cancer activity while high concentration of IC₅₀ at millimolar level is needed, which could not be reached by regular oral administration route. Thus, higher efficient agent is urgently demanded for clinically treating bladder cancer. Here, by conjugating artesunate to metformin, a novel artesunate-metformin dimer triazine derivative AM2 was designed and synthesized. The inhibitory effect of AM2 on bladder cancer cell line T24 and the mechanism underlying was determined. Anti-tumor activity of AM2 was assessed by MTT, cloning formation and wound healing assays. Decreasing effect of AM2 on lipogenesis was determined by oil red O staining. The protein expressions of Clusterin, SREBP1 and FASN in T24 cells were evaluated by Western blotting. The results show that AM2 significantly inhibited cell proliferation and migration at micromolar level, much higher than parental metformin. AM2 reduced lipogenesis and down-regulated the expressions of Clusterin, SREBP1 and FASN. These results suggest that AM2 inhibits the growth of bladder cancer cells T24 by inhibiting cellular lipogenesis associated with the Clusterin/SREBP1/FASN signaling pathway.