• 대한치과의사협회지
• /
• 제57권12호
• /
• pp.768-777
• /
• 2019

Alveolar bone resorption are unpredictable and always occur after tooth extraction. Such bone resorption causes insufficient alveolar ridge which make implant placement difficult. There are many techniques to increase the alveolar ridge. Representative procedures include ridge split, guided bone regeneration, bone graft using autogenous block bone, and alveolar distraction. In each procedure, there are indications and complications. Depending on the shape and the width of bone defects, we can choose procedures for horizontal bone augmentation and vertical bone augmentation.

• 대한심미치과학회지
• /
• 제7권1호
• /
• pp.32-40
• /
• 1998

Alveolar ridge augmentation and preservation techniques designed to reconstruct deformed alveolar ridge now occupy a major role in esthetic dentistry. Previously, deformed alveolar ridges were filled with plastic materials(porcelain or resin) of prosthesis to restore ridge contours, which resulted in larger teeth and food impaction under the pontic base. So, prostheses of this type were unacceptable and really detectable when patients smiled. But nowadays, alveolar ridge augmentation procedures enable the dentists to provide patients with fixed prostheses that are esthetic. The development of guided tissue regeneration technique and materials also have made a major impact on extending the scope of therapeutic horizons in dentistry.

• Journal of Periodontal and Implant Science
• /
• 제38권2호
• /
• pp.207-214
• /
• 2008

Purpose: The aim of augmentation of the alveolar ridge is to restore absorbed alveolar ridges for future implant site or esthetic prosthodontic restoration. The present clinical report describes the anterior maxillary augmentation cases using a soft tissue rotated palatal flap, and considers various problems of before and after surgery. Method: First & second patients were treated by vascularized interpositional periosteal-connective tissue(VIP-CT) flap for horizontal soft tissue augmentation. Especially second patient was progressed with bone grafting at the same time. Third patient was treated by the same flap with bone graft and implant placement in single tooth missing premaxillary area. Result: The obtained horizontal augmentation width measured $0.5{\sim}2.7\;mm$. Conclusion: This technique constitutes a viable approach for augmentation the anterior sector of alveolar ridge with the placement of dental implants. But it needs correct diagnosis preparation and careful surgery skill.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권4호
• /
• pp.386-390
• /
• 2007

This is about the case of loss of multiple teeth and alveolar bone caused by trauma, which needed alveolar bone augmentation before implant treatment. Alveolar bone was reconstructed using iliac bone graft, and thereafter first implant surgery was followed by consolidation period of 3 months. Iliac bone resorption was observed at the time of implant placement. And that resorption was more in the horizontal dimension than in the vertical. We conclude that additional treatment planning(e.g. using alveolar distraction osteogenesis or tissue expander) should be considered besides bone graft for vertical alveolar bone augmentation. For both maxilla and mandible, prosthodontic treatment was carried out $4{\sim}5$ months after implant placement. To compensate alveolar bone deficiency, partial hybrid overdenture on maxilla and implant-supported fixed bridge on mandible were fabricated, and the total treatment was finished.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권3호
• /
• pp.276-281
• /
• 2010

The maxillary posterior area is the most challenging site for the dental implant. After missing of teeth on maxillary posterior area due to periodontal problems, the remaining alveolar ridge is usually very thin because of not only pneumatization of maxillary sinus but also destruction of alveolar bone. The maxillary sinus bone graft procedure is one of the most predictable and successful treatments for the rehabilitation of atrophic and pneumatized endentulous posterior maxilla. But, in case of severe destruction of alveolar bone due to periodontal problems, very long crown length is still remaining problem after successful sinus graft procedures. We performed vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft. After this procedures, we could get more favorable crown-implant ratio of final prosthodontic appliance and more satisfactory results on biomechanics. This is a preliminary report of the vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft, so requires more long-term follow up and further studies.

• Archives of Plastic Surgery
• /
• 제40권5호
• /
• pp.542-545
• /
• 2013

Background The aims of alveolar bone grafting are closure of the fistula, stabilization of the maxillary arch, support for the roots of the teeth adjacent to the cleft on each side. We observed nostril base augmentation in patients with alveolar clefts after alveolar bone grafting. The purpose of this study was to evaluate the nostril base augmentation effect of secondary alveolar bone grafting in patients with unilateral alveolar cleft. Methods Records of 15 children with alveolar clefts who underwent secondary alveolar bone grafting with autogenous iliac cancellous bone between March of 2011 and May of 2012 were reviewed. Preoperative and postoperative worm's-eye view photographs and reconstructed three-dimensional computed tomography (CT) scans were used for photogrammetry. The depression of the nostril base and thickness of the philtrum on the cleft side were measured in comparison to the normal side. The depression of the cleft side pyriform aperture was measured in comparison to the normal side on reconstructed three-dimensional CT. Results Significant changes were seen in the nostril base (P=0.005), the philtrum length (P=0.013), and the angle (P=0.006). The CT measurements showed significant changes in the pyriform aperture (P<0.001) and the angle (P<0.001). Conclusions An alveolar bone graft not only fills the gap in the alveolar process but also augments the nostril base after surgery. In this study, only an alveolar bone graft was performed to prevent bias from other procedures. Nostril base augmentation can be achieved by performing alveolar bone grafts in children, in whom invasive methods are not advised.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권4호
• /
• pp.325-329
• /
• 2009

Objective : This is to report the effectiveness of intraoral distraction osteogenesis, iliac bone graft for alveolar augmentation in the extremely atrophied alveolar defects after infected allobone grafted area. Subjects and Methods : Anterior segmental osteotomy was performed and the trans-oral alveolar distractors (Martin, Germany) were applied in patient with the severe acquired anterior mandibular and mandibular defect after ameloblastoma enucleation. Iliac bone grafts were performed in defect sites and distraction osteogenesis were treated. After latent period for 1 week, the osteomized alveolar segments were distracted by 0.75 mm a day (0.25 mm/1 turn) for 10 days The consolidation period was about 12 weeks. Thereafter, 2 titanium threaded implants were simultaneously installed with removal of distractor. For oral rehabilitiation, The implants were installed in maxilla, mandible. It was tested with clinically and radiographically. Results : Amounts of acquired alveolar bone were 10 mm with the increased width of the ridge crests and soft tissue expansion. Dental implants installated on the augmented alveolar ridges in 12 weeks after distraction were confirmed as in good osseointegration and in good function without any complications. Conclusion : Intraoral distraction osteogenesis can be a good option for alveolar ridge augmentation of the severely atrophied ridges and soft-tissue defects.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.3.1-3.8
• /
• 2018

Background: In this research article, we evaluate the use of sub-periosteal tunneling (tunnel technique) combined with alloplastic in situ hardening biphasic calcium phosphate (BCP, a compound of β-tricalcium phosphate and hydroxyapatite) bone graft for lateral augmentation of a deficient alveolar ridge. Methods: A total of 9 patients with deficient mandibular alveolar ridges were included in the present pilot study. Ten lateral ridge augmentation were carried out using the sub-periosteal tunneling technique, including a bilateral procedure in one patient. The increase in ridge width was assessed using CBCT evaluation of the ridge preoperatively and at 4 months postoperatively. Histological assessment of the quality of bone formation was also carried out with bone cores obtained at the implant placement re-entry in one patient. Results: The mean bucco-lingual ridge width increased in average from 4.17 ± 0.99 mm to 8.56 ± 1.93 mm after lateral bone augmentation with easy-graft CRYSTAL using the tunneling technique. The gain in ridge width was statistically highly significant (p = 0.0019). Histomorphometric assessment of two bone cores obtained at the time of implant placement from one patient revealed 27.6% new bone and an overall mineralized fraction of 72.3% in the grafted area 4 months after the bone grafting was carried out. Conclusions: Within the limits of this pilot study, it can be concluded that sub-periosteal tunneling technique using in situ hardening biphasic calcium phosphate is a valuable option for lateral ridge augmentation to allow implant placement in deficient alveolar ridges. Further prospective randomized clinical trials will be necessary to assess its performance in comparison to conventional ridge augmentation procedures.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권3호
• /
• pp.242-246
• /
• 2006

Objective : This is to report the criteria of success of intraoral distraction osteogenesis for alveolar augmentation in the severely atrophied alveolar defects through clinical result of 2 cases. Subjects and Methods : Anterior segmental osteotomy was performed and alveolar distractors (Martin and Leibinger, Germany) were applied each in 2 patients with severely defected anterior maxillary area. The osteomized alveolar segments were distracted by 1mm a day after latency period. After the consolidation period implants were installed with removal of distractor. The implants were evaluated clinically and radiographically. Results : In Case I, the distracted bone was directed to the palatal side, and another augmentation treatment - block bone graft, guided bone regeneration - was needed. In Case II, the successful alveolar bone augmentation was achieved. Dental implant was placed on distracted alveolar bone, and showed good osseointegration and good function without any complication. Conclusion : Distraction osteogenesis can be a good choice for alveolar ridge augmentation of severely atrophied ridges. However, the anterior esthetic prosthetics relies on the control of the vector, the kind of distractor, the healing capacity of patient and the etiology of atrophy. Therefore another study of each category would be needed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권3호
• /
• pp.124-130
• /
• 2014

Onlay bone grafting, guided bone regeneration, and alveolar ridge split technique are considered reliable bone augmentation methods on the horizontally atrophic alveolar ridge. Among these techniques, alveolar ridge split procedures are technique-sensitive and difficult to perform in the posterior mandible. This case report describes successful implant placement with the use of piezoelectric hinge-assisted ridge split technique in an atrophic posterior mandible.