• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.276-277
• /
• 2006

In order to accelerate the sintering of Al-Bronze powder covered with passive oxide film, we focused on the way to add Al-Ca fluoride consisting of $AlF_3$ and $CaF_2$, examined the effect of the $CaF_2$ mixing rate in Al-Ca fluoride, the amount of the added Al-Ca fluoride and the sintering temperature on sintering properties of Al-Bronze powder and considered the mechanism of the sintering acceleration. Al-Bronze powder was sintered most effectively by adding Al-Ca fluoride with the $CaF_2$ mixing rate of 20mass%. If the amount of added fluoride was over 0.05mass% and the sintering temperature was over 1123K, the sintering acceleration of the Al-Bronze powder appears. Regarding the mechanism of the sintering acceleration, it was presumed that $Al_2O_3$ film on the surface of the Al-Bronze particles was removed in the process of the formation of gaseous AlOF by the reaction with $AlF_3$, and the reaction was accelerated further by the presence of the liquid phase which is formed in Al-Ca fluoride.

• 한국지반신소재학회논문집
• /
• 제22권1호
• /
• pp.1-7
• /
• 2023

본 연구에서는 화학적 박리를 통해 흑연분말로부터 분리한 산화그래핀의 전기적특성을 개선시키기 위해 자가조립단층막 기술을 활용하였다. 반응물질로는 황산알루미늄(Al₂(SO₄)₃)을 적용하였으며, 시멘트를 기반으로 한 건설구조물의 자가센싱에 적용하기 위한 기초연구를 수행하였다. 전기저항 측정결과 대조군인 표준공시체와 대비할 때 GO 및 Al-GO가 함유된 공시체에서 각각 10.2%, 15.9% 개선되어 도체로서의 활용 가능성을 확인하였다. 미세구조분석 결과 Al-GO의 첨가에 따라 Al(OH)₃ gel형성을 확인하였으며, 이로 인해 공시체의 밀도를 향상시켜 전류의 흐름을 원활하게 개선시킨 것으로 판단된다. 이는, 단순 구조물이 아닌 구조물 자체로서 활용성을 지닐 수 있음을 시사하며, 스마트 건설자재로서의 가능성을 확인하였다.

• 한국입자에어로졸학회지
• /
• 제10권4호
• /
• pp.177-182
• /
• 2014

In this study, nickel-coated aluminum (Ni/Al) powders were synthesized for the utilization of energetic applications. Oxide materials present at the surface of Al powders of $45{\mu}m$ in averaged size were removed by using sodium hydroxide(NaOH) solution which is used for controlling pH. Nickel material is coated into the surface of oxide-removed Al powders by electroless-plating process. The microstructure of fabricated Ni/Al powders shows that nickel layers with a few hundreds nm were very homogeneously formed onto the surface of Al powders. The oxidation behavior of Ni/Al exihibit somewhat faster oxidation rate than that of pure Al with surface oxidation. Also, the higher exothermic reaction was observed from the Ni/Al powders. From the result of this, nickel coating is very promising method to obtain highly reactive and safe Al powders for energetic applications.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.339-344
• /
• 2021

Composite materials offer distinct and unique properties that are not naturally inherited in the individual materials that make them. One of the most attractive composites to manufacture is the aluminum alloy matrix composite, because it usually combines easiness of availability, light weight, strength, and other favorable properties. In the current work, Powder Metallurgy Method (PMM) is used to prepare Al2024 matrix composites reinforced with different mixing ratios of yttrium oxide (Y₂O₃) particles. The tests performed on the composites include physical, mechanical, and tribological, as well as microstructure analysis via optical microscope. The results show that the experimental density slightly decreases while the porosity increases when the reinforcement ratio increases within the selected range of 0 ~ 20 wt%. Besides this, the yield strength, tensile strength, and Vickers hardness increase up to a 10 wt% Y₂O₃ ratio, after which they decline. Moreover, the wear results show that the composite follows the same paradigm for strength and hardness. It is concluded that this composite is ideal for application when higher strength is required from aluminum composites, as well as lighter weight up to certain values of Y₂O₃ ratio.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제13권1호
• /
• pp.101-109
• /
• 2008

국내 화학회사에서 발생되는 연마분진 폐기물에 대한 흡착제로서의 재이용성을 평가하기 위하여 연마분진을 $550^{\circ}C$에서 하소시켜 얻어진 무정형 알루미늄 산화물(AMA-L)을 이용하여 양이온 중금속인 구리, 카드뮴, 납 등에 대한 흡착특성을 파악하였으며 MINEQL + 프로그램을 적용하여 AMA-L과 양이온 중금속 이온간의 표면흡착결합 반응을 모사하여 흡착실험결과와 비교하였다. 구리와 카드뮴, 납의 단일성분에 대한 AMA-L의 흡착실험결과, 납 > 구리 > 카드뮴의 순서로 친화력의 차이가 발생하는 것을 확인하였다. 구리와 카드뮴의 농도변화에 따른 AMA-L 흡착실험 결과 구리와 카드뮴의 농도를 증가시킴에 따라 두 성분의 흡착효율은 모두 감소되는 것으로 나타났으며 구리와 카드뮴이 동시에 존재하는 이성분계 흡착의 경우에는 단일성분으로 존재하는 경우와 유사한 흡착율을 나타내었으며 경쟁이온의 영향을 거의 받지 않는 것으로 확인이 되었다. 또한, AMA-L에 대한 흡착특성에 대한 MINEQL+를 이용한 모사결과 단일성분과 이성분계 흡착에 대한 흡착특성은 비교적 잘 일치하는 것으로 나타났다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.191-191
• /
• 2003

가시광선영역에서 높은 광학적 투명도를 갖는 n-type 반도체인 ZnO 박막은 넓은 범위에서 응용되고 있다. 현재 ZnO 박막의 특성 향상을 위하여 여러 원소(Al, Ga)의 도핑을 시도하고 있다. 특히 Al-doped ZnO 박막은 sol-gel dip coating에 의해서도 높은 전기전도도와 투과율로 활발히 연구되고 있다 본 논문에서는 여러 도핑농도를 갖는 Al-doped ZnO 박막이 sol-gel dip coating법에 의해 준비되었다. Al-doped ZnO 박막은 zinc acetate [Zn($CH_3$COO$_2$)ㆍ2$H_2O$] powder 와 여러 도핑농도를 갖는 aluminum nitrate (Al(NO$_3$)$_3$ㆍ9$H_2O$) powder를 알코올에 용해하여 $H_2O$, Ethylene glycol, Ethylene diamine 등을 첨가하여 제조하였다 XRD와 SEM (Scanning electron microscope)이 막의 상형성 분석을 위해 이용되었으며, 가시광선 영역 투과율(UV/VIS spectrophotometer)과 표면전기저항(four point probe)이 주요 특성으로 분석되었다.

• 한국분말재료학회지
• /
• 제7권4호
• /
• pp.197-204
• /
• 2000

Gas atomization mechanical alloying and hot pressing have successfully made high temperature Al-9.45Fe-4.45Cr alloy. The microstructure and mechanical properties of this alloy has been studied by using optical microscope, scanning electron microscope, transmission electron microscope, X-ray diffractometer and compressive tester. It contains high concentration of transition elements of Fe and Cr, which form thermally stable dispersoids in the aluminum matrix. Proper oxidation of powders during ball milling strengthens the bulk extrudates by providing the obstacle particles. The oxide particles are very chemically and thermally stable and prevent the coarsening of the intermediate compounds.

• 한국세라믹학회지
• /
• 제36권4호
• /
• pp.360-365
• /
• 1999

The combustion process was applied to synthesize the LiAlO2 powder with high specific surface area and pure crystalline ${\gamma}$-phase. For the combustion synthesis of LiAlO2 which is a binary-component oxide in-cluding lithium and aluminum ions the mixture of citric acid and urea with stoichiometric composition was selected as a promising fuel. The highest combustion temperature was measured in the reaction using the mixed fuel with a stoichiometric composition. The synthesized powder was very fine and its specific surface area was more than 15 m2/g.

• 대한가정학회지
• /
• 제41권8호
• /
• pp.55-62
• /
• 2003

Natural dyes generally fan into two categories; organic dyes coming from animals and plants and inorganic dyes obtained from various minerals such as bengala, loess, ultramarine, prussian blue and etc. The main components of volcanic ash is clay mineral such as kaolinite, illite, quartz. Clay minerals Composing volcanic ash are kaolinite［$Al_4Si_4O_{10}{(OH)_{8}}$］, illite［$K_{X}Al_2(Si,\;Al)_4O_{10}{(OH)}_2$］, quartz［$SiO_2$］, homblende［$Na_{0-1}\;Ca_2{(Mg,\;Fe,\;Al)}_5{(Si,\;Al)}_{8}O_{22}{(OH)}_2$］and etc. And the redish color mainly comes from iron oxide. In this paper, two different classes of dyeing process were tested; dyeing with volcanic ash only and cationic agent pre-treatment followed by dyeing with volcanic ash. The compositions of the volcanic ash powder and the volcanic ash deposited on the cotton knitted fabrics identified by energy dispersive spectrometer and XRD analysis. The major chemical components of volcanic ash deposited on the cotton knitted fabrics were confirmed to be the saicon oxide, iron oxide, and aluminum oxide and etc. According to the analysis by XRD and EDS-SEM, kaolinite, illite and quartz were also identified.

• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1120-1126
• /
• 2003

알루미나 분말을 분쇄하면서 Y 수화물을 동시에 침전시켜 YAG 분말을 합성하였다. 하소 분말 (l20$0^{\circ}C$, 4 h)에는 YAG 외에 소량의 YAM이 남아 있었다. 그러나 평균 입경 0.57 $\mu$m으로 분쇄한 분말 성형체에서는 산화물 혼합법에서 YAG 단일상이 얻어지는 온도 (l500∼1$600^{\circ}C$) 보다 훨씬 낮은 130$0^{\circ}C$ 에서 YAG 단일상이 이미 형성되었다. 분말의 소결성은 우수하여 소결조제 SiO$_2$(350 ppm Si) 의 첨가에 관계없이 치밀화가 잘 일어났다. SiO$_2$를 첨가하지 않은 경우, 1$600^{\circ}C$에서 98%의 손결밀도를 얻었다. SiO$_2$를 첨가한 경우에는 150$0^{\circ}C$에서 치밀화가 더 잘 일어나 97.7%의 소결밀도가 얻어졌으며, 1$600^{\circ}C$에서는 SiO$_2$의 소결촉진 효과가 나타나지 않아 밀도는 SiO$_2$를 첨가하지 않은 시편과 비슷하였다.