• Carbon letters
• /
• v.8 no.3
• /
• pp.191-198
• /
• 2007

Recent studies have revealed the poisonous nature of aluminum(III) species to aquatic and terrestrial organisms. Therefore, this investigation aims to develop batch adsorption experiments in the laboratory, aiming to the removal of aluminum(III) from aqueous solutions onto powdered activated carbon (PAC). The latter (which is an effective and inexpensive sorbent) was prepared from olive stones generated as plant wastes and modified with an aqueous modifying oxidizing agent, viz. $HNO_3$. The main parameters (i.e. initial solution pH, sorbent and $Al^{3+}$ ions concentrations, stirring times and temperature) influencing the sorption process were examined. The results obtained revealed that the sorption of $Al^{3+}$ ions onto PAC is endothermic in nature and follows first-order kinetics. The adsorption data were well described by the Langmuir, Freundlich and Dubinin-Radushkevich (D-R) adsorption models over the concentration range studied. Under the optimum experimental conditions employed, the removal of ca. 100% $Al^{3+}$ ions in the concentration range $1.35-2.75\;mg{\cdot}l^{-1}$ was attained. Moreover, the procedure was successfully applied to the recovery of aluminum spiked to some environmental water samples with an RSD (%), does not exceed 1.22%.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.4
• /
• pp.203-210
• /
• 2019

In this work, anodizing behavior of 6xxx series aluminum alloys was studied under constant current density and constant voltage conditions in 20% sulfuric acid solution by V-t curves, I-t curves, thickness measurement, observations of surface appearance and cross-sectional observation of anodizing films. The film growth rate of the anodizing films on Al6063, Al6061 and Al6082 obtained at 20 V were $0.63{\mu}m/min$. $0.46{\mu}m/min$ and $0.38{\mu}m/min$, respectively. Time to the initiation of imperfections at the oxide/substrate interface under constant current condition was shortened and colors of anodizing films became darker with the amount of alloying elements in 6xxx series aluminum alloys. Based upon the experimental results obtained in this work, it is concluded that maximum anodizing film thickness without interfacial defects is reduced with increasing amount of alloying elements and brighter anodizing films can be obtained by decreasing amount of alloying elements in the aluminum alloys.

• Applied Microscopy
• /
• v.44 no.2
• /
• pp.79-82
• /
• 2014

Aluminum nitride (AlN) powder was easily synthesized by the direct nitridation of Al melt containing ~20 wt.% Mg catalyst and the nitriding behavior was investigated by thermodynamic calculation and through observations of electron microscopy and X-ray diffraction. The addition of Mg catalyst decreased the nitriding temperature below $1,000^{\circ}C$, which is comparable to the high nitriding temperature of $1,400^{\circ}C$ required in carbothermal method. It was caused by a significant increase of the solubility of nitrogen gas due to the increase of Mg catalyst in Al melt. The dissolved nitrogen gas met Mg catalyst and was transformed into metastable $Mg_3N_2$. Finally the metastable phase reacted with Al to AlN.

• Journal of Korea Foundry Society
• /
• v.33 no.1
• /
• pp.8-12
• /
• 2013

Although aluminum-silicon based commercial casting alloys have been used in applications that demand high electrical or thermal conductivity, new aluminum casting alloys that possess higher conductivities are currently required for advanced applications. Therefore, there is much research into the development of new high conductivity aluminum casting alloys that contain lower amounts of or no silicon. In this research, the properties and casting characteristics of Al-Zn-Fe-Si alloys with various Fe and Si contents were investigated. Two types of AlFeSi phases were formed depending on the Fe and Si contents. As the silicon content increased, the tensile strength of the Al-Zn-Fe-Si alloy increased slightly, while the electrical conductivity decreased slightly. It was also observed that both the fluidity and hot cracking susceptibility of the investigated alloys were closely related to the formation of the AlFeSi phases.

• Journal of the Korean Ceramic Society
• /
• v.32 no.9
• /
• pp.1076-1084
• /
• 1995

A mixture of aluminum isopropoxide (Al(OC3H7i)3) solution and sodium hydroxide (NaOH) solution was hydrolyzed in the range between pH 1~14. the powder obtained from sol-gel process was calcined at several temperatures and crystallization behaviors of various samples were investigated. The hydrolyzed sols of pH 1~6 wre clear, or near clear. On the other hand, powder precipitated from sols of pH 7~14. The sample obtained from pH 3 solution crystallized via complicated route, and $\beta$-Al2O3 and $\beta$"-Al2O3 phases appeared at lower temperature than samples from other pH conditions. And the quantity of remained $\beta$"-Al2O3 phase after heat treatment at 150$0^{\circ}C$ was more than samples from other pH conditions. After sintering, ionic conductivities were 1.3$\times$10-4S.cm-1 to 0.76$\times$10-4S.cm-1.0-4S.cm-1.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.242-246
• /
• 2006

[ ${\alpha}-Al_2O_3$ ] nanopowders were fabricated by the thermal decomposition and synthetic of Ammonium Aluminum Carbonate Hydroxide (AACH). Crystallite size of 5 to 8 nm were fabricated when reaction temperature of AACH was low, $8^{\circ}C$, and the highest $[NH_4{^+}][AlO(OH)_n{(SO_4){^-}}_{3-n/2}][HCO_3]$ ionic concentration to pH of the Ammonium Hydrogen Carbonate (AHC) aqueous solution was 10. The phase transformation fem $NH_4Al(SO_4)_2$, rhombohedral $(Al_2(SO_4)_3)$, amorphous-, ${\theta}-,\;{\alpha}-Al_2O_3$ was examined at each temperature according to the AACH. A Time-Temperature-Transformation (TTT) diagram for thermal decomposition in air was determined. Homogeneous, spherical nanopowders with a particle size of 70 nm were obtained by firing the 5 to 8 m crystallites, which had been synthesized from AACH at pH 10 and $8^{\circ}C,\;at\;1150^{\circ}C$ for 3 h in air.

• Korean Journal of Materials Research
• /
• v.31 no.12
• /
• pp.672-676
• /
• 2021

In this paper, the effect of Ni (0, 0.5 and 1.0 wt%) additions on the microstructure, mechanical properties and electrical conductivity of cast and extruded Al-MM-Sb alloy is studied using field emission scanning electron microscopy, and a universal tensile testing machine. Molten aluminum alloy is maintained at 750 ℃ and then poured into a mold at 200 ℃. Aluminum alloys are hot-extruded into a rod that is 12 mm in diameter with a reduction ratio of 39:1 at 550 ℃. The addition of Ni results in the formation of Al₁₁RE₃, AlSb and Al3Ni intermetallic compounds; the area fraction of these intermetallic compounds increases with increasing Ni contents. As the amount of Ni increases, the average grain sizes of the extruded Al alloy decrease to 1359, 536, and 153 ㎛, and the high-angle grain boundary fractions increase to 8, 20, and 34 %. As the Ni content increases from 0 to 1.0 wt%, the electrical conductivity is not significantly different, with values from 57.4 to 57.1 % IACS.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1264-1268
• /
• 1997

This study was performed to investigate the effects of aluminium treatment on renal damage in rats. Seventy five male Sprague-Dawley strains were divided into five groups; the control, 250 ppm $AlCl_3$, group, 500 ppm AlCl3 group, 250 ppm $Al_2(SO_4)_3$, group, 500 ppm $Al_2(SO_4)_3$ group and kept on the diet for 2 weeks. The body weight gain was more increased in $AlCl_3$, treated of rats but decreased in $Al_2(SO_4)_3$, treated rats than the control, on based in histophysiological examination, in $AlCl_3$, treated group, thyrodization of kidney tubular lumen and interstitial inflammatory cell infiltration, abscess formation were demonstrated and in $Al_2(SO_4)_3$, treated animals destruction of glomeruli and necrosis in kidney cortex by inflammatory cells were shownd. On the other hand, blue-pigmented cast was noted in tubules of $AlCl_3$ administration group whereas focal aluminium accumulation was noted at interstitial tissue in kidney of $Al_2(SO_4)_3$, administration group.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.2
• /
• pp.232-239
• /
• 2010

This study was designed to investigate the effects of green tea extract on aluminum-induced damage to phospholipid content in old rat cerebral tissue. The aim of this study was to investigate the possibility that aluminum is the cause of Alzheimer's disease. Forty Sprague-Dawley old male rats weighing 350$\pm$10 g were divided into four groups, consisting of a control group (CON), 40 ppm aluminum sulfate group (Al-40), green tea water extract group (GTWE), and 40 ppm aluminum sulfate and green tea water extract groups (Al-40+GTWE) and kept on their respective diets for 12 weeks. In order to discover the influence of aluminum on cerebral tissue of old male rats, the serum aluminum concentration and phospholipid composition were compared between the aluminum-treated group and the normal group. The results showed that the serum aluminum concentration was higher in the aluminum sulfate-treated group than in the normal group. The cerebral tissue phospholipid concentration decreased significantly in the aluminum sulfate treated group as compared to the normal group. The results of this experiment show that increase of aluminum concentration in experimental animals causes the rise of serum aluminum and phospholipid concentrations, phenomena that are very similar to those shown in Alzheimer's disease., The results of this experiment, together with reports that aluminum is a cause of neurofibrillary tangles in cerebral tissue, therefore demonstrate the possibility that aluminum is the cause of Alzheimer's disease. Green tea water extract is also shown to be an effective therapeutic candidate for the treatment of Alzheimer's disease.

• BMB Reports
• /
• v.30 no.5
• /
• pp.346-351
• /
• 1997

The maximum adsorption/desorption conditions and the adsorption mechanism of globular proteins to vaccine adjuvants were determined. The maximum adsorption ratio of protein to the $Al^{3+}$ content of aluminum oxyhydroxide and the optimal adsorption pH are 2:1 (${\mu}g:{\mu}g$) for bovine serum albumin (BSA) at pH 6.0 and 2.5:1 (${\mu}g:{\mu}g$) for immunoglobulin G (IgG) at pH 7.0, respectively. The maximum adsorption ratio onto aluminum phosphate gel was 1.5:1 (${\mu}g$ Protein:${\mu}g$ $Al^{3+}$) at pH 5.0 for both BSA and IgG. Adsorption of the native globular proteins, BSA and IgG, to aluminum oxyhydroxide and aluminum phosphate gel was reversible as a function of pH. Complete desorption of these proteins from aluminum phosphate gel was observed at alkaline pH, whereas only 80~90% removal from aluminum oxyhydroxide was achieved with alkaline pH and 50 mM phosphate buffer. We conclude that electrostatic and hydrogen bonding interactions between the native proteins and adjuvants are important binding mechanisms for adsorption, and that the surface charge of the protein and the colloid components control the maximum adsorption conditions.