• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.87-87
• /
• 2010

Epoxy/mica has been used as the material of high-voltage rotator stator winding due to its high insulation performance, mechanical strength, and thermal stability. In recent years, however, it shows frequent changes in the load of generators and frequent automatic stops due to the significant increase in peak loads from the increase in the applied load of power facilities according to the introduction of advanced and high-technology equipments. Thus, it is necessary to develop new materials that highly develop the conventional insulation materials. Nanotechnology introduced in the present time has become an alternative plan that overcomes such technical limitations. In addition, the nano-scaled intercalation composite has been known as the material that represent excellent electrical, mechanical, and thermal characteristics compared to the conventional materials. This study investigated the dielectric dispersion and relaxation characteristics of the nanocomposite, which was fabricated by mixing epoxy matrix with nano-scaled intercalation mica and clay, according to changes in frequencies and temperatures.

• 한국환경과학회지
• /
• 제12권3호
• /
• pp.307-317
• /
• 2003

In this study, the material cycle model was applied to suggest alternative management of water quality for Jeju Harbor. The distribution of COD, DIN (dissolved inorganic nitrogen) and DIP (dissolved inorganic phosphorus) concentrations was reasonably reproduced by simulations on the model area of the Jeju Harbor using a material cycle model. The simulations of COD, DIN and DIP concentrations were performed under the conditions of 20∼100% pollution loadings reductions from pollution sources. In case of the 100% reduction of the input loads from Sanzi river, concentrations of COD, DM and DIP were reduced to 39%, 78% and 52%, respectively at Jeju harbor. In contrast, in case of the pollutant loadings reductions from sediment, the effect of DIN and DIP reduction relatively seemed to increase around the center of study area. The 95% reduction of the pollutant loadings from river and sediment is required to meet the COD and nutrients concentration of second grade of ocean water quality criteria.

• 한국기계가공학회지
• /
• 제18권12호
• /
• pp.28-37
• /
• 2019

Due to their flexible tailoring qualities, composites have become fascinating materials for structural engineers. While the research area of fiber-reinforced composite materials was previously limited to synthetic materials, natural fibers have recently become the primary research focus as the best alternative to artificial fibers. The natural fibers are eco-friendly and relatively cheaper than synthetic fibers. The main concern of current research into natural fiber-reinforced composites is the prediction and enhancement of the effective material properties. In the present work, finite element analysis is used with a numerical homogenization approach to determine the effective material properties of jute fiber-reinforced epoxy composites with various volume fractions of fiber. The finite element analysis results for the jute fiber-reinforced epoxy composite are then compared with several well-known analytical models.

• 세라미스트
• /
• 제21권1호
• /
• pp.98-111
• /
• 2018

The lead-based perovskite (CH3NH3PbI3) material has a high molar coefficient, high crystallinity at low temperature, and long range of balanced electron-hole transport length. In addition, PCE of perovskite solar cells (PSCs) has been dramatically improved by over 22% by amending the electronic quality of perovskite and by using state-of-the-art hole transporting materials (HTMs) such as tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) due to enhanced charge transport toward the electrode via properly aligned energy levels with respect to the perovskite. Replacing the spiro-OMeTAD with new HTMs with the desired properties of appropriate energy levels, high hole mobility in its pristine form, low cost, and easy processable materials is necessary for attaining highly efficient and stable PSCs, which are anticipated to be truly compatible for practical application. Furthermore, Recently Pb-free perovskite materials much attention as an alternative light-harvesting active layer material instead of lead based perovskite in photovoltaic cells. In this work, we demonstrate a Pb-free perovskite material for the light harvesting and emitter as optoelectronic devices.

• Journal of the Korean Wood Science and Technology
• /
• 제50권3호
• /
• pp.179-185
• /
• 2022

This study investigated the prospect of using peanut shells as an alternative and green sound-absorbing material. The sound-absorption coefficients were determined after filling impedance tubes of 30, 60, and 90 mm in height with peanut shells. The sound-absorption ability increased as the filling height increased, showing noise reduction coefficient (NRCs) of 0.23, 0.43, and 0.54 for the 30-, 60-, and 90-mm heights, respectively. In addition, for sounds greater than 2,000 Hz, the average sound-absorption coefficient of peanut shells in the 60- and 90-mm heights was 0.9. In summary, peanut shells were found to have good sound-absorption properties comparable to or better than those of bamboo, sisal, jute, and wool, and this research suggests that peanut shells may be useful as an environmentally friendly sound-absorbing material.

• Steel and Composite Structures
• /
• 제48권5호
• /
• pp.583-597
• /
• 2023

This paper introduces a novel approach to multi-material topology optimization (MTO) targeting in-plane bi-directional functionally graded (IBFG) non-uniform thickness Reissner-Mindlin plates, employing an alternative active phase approach. The mathematical formulation integrates a first shear deformation theory (FSDT) to address compliance minimization as the objective function. Through an alternating active-phase algorithm in conjunction with the block Gauss-Seidel method, the study transforms a multi-phase topology optimization challenge with multi-volume fraction constraints into multiple binary phase sub-problems, each with a single volume fraction constraint. The investigation focuses on IBFG materials that incorporate adequate local bulk and shear moduli to enhance the precision of material interactions. Furthermore, the well-established mixed interpolation of tensorial components 4-node elements (MITC4) is harnessed to tackle shear-locking issues inherent in thin plate models. The study meticulously presents detailed mathematical formulations for IBFG plates in the MTO framework, underscored by numerous numerical examples demonstrating the method's efficiency and reliability.

• 정보관리학회지
• /
• 제39권3호
• /
• pp.51-67
• /
• 2022

본 연구는 국내에서 서비스되는 대체자료 장서 수준을 진단하고 향후 대체자료 장서개발의 방향성과 목표지향점을 제시하는 데 목적이 있다. 국가대체자료종합목록과 국내 인기도서 및 신간도서 목록을 장서기반 평가방법을 활용하여 비교·분석하였다. 연구결과 첫째, 10년간 인기도서 목록 기준 대체자료 장서 비율은 90.1%이다. '언어', '예술', '기술과학' 주제의 대체자료 장서 비율이 낮은 편이며, 제작 매체별은 '텍스트 데이지자료'의 비율이 높았다. 둘째, 국가대체자료종합목록을 기준으로 주제별, 매체별, 제작기관별 공통장서 확보율과 장서고유성 지수를 분석한 결과 대체자료의 소장 장서량이 많은 도서관에서 공통장서와 고유장서의 편향성이 높게 나타났다. 공통장서 확보율이 높은 주제는 문학과 사회과학 순이며, 장서고유성 지수가 높은 주제는 종교, 예술, 언어 순으로 나타났다. 셋째, 최근 3년간 신간도서의 대체자료 장서 비율은 5.09%이며 같은 기간 동안 공공도서관의 평균 도서구입율은 8.83%이다. 신간도서 대비 대체자료 장서 비율의 적정 기준은 존재하지 않으며 시각장애인의 정보격차 해소를 위해 신간도서 대비 대체자료 장서 비율을 공공도서관 도서구입율 수준으로 높일 것을 제언하고자 한다.

• 대한환경공학회지
• /
• 제22권5호
• /
• pp.927-938
• /
• 2000

박테리아를 토양과 같은 다공성 매질에 주입시키고 적절한 기질과 영양분을 공급시키면 박테리아는 매질의 표면에 부착하여 성장한다. 그 결과 바이오필름이 생성되어 공극의 크기가 감소하여 매질의 투수계수가 감소되며, 오염물질을 분해시키는 생물학적 오염분해 능력을 갖게 된다. 본 연구는 투수계수가 비교적 큰 모래와 화강풍화토에 박테리아를 접종, 배양한 후 토양의 투수계수의 변화를 측정하였으며, 배양된 바이오필름의 화학물질에 대한 저항성 및 온도변화에 대한 내구성 실험을 통해 대용 차수재로의 가능성을 평가하였다. 또한 bio-barrier의 유기물질 분해능 및 bio-barrier의 두께에 따른 미생물의 생장도를 column test를 통하여 측정하여 bio-barrier 내에서의 기질의 이동 및 생분해와 박테리아 농도의 분포 변화간의 관계를 제시하였다.

• 한국지반공학회논문집
• /
• 제15권6호
• /
• pp.273-283
• /
• 1999

박테리아를 토양과 같은 다공성 매질에 주입시키고 적절한 기질과 영양분을 공급시키면 박테리아는 매질의 표면에 부착하여 성장하며 그 결과 공극의 크기가 감소하여 매질의 투수계수가 감소되고 입자간 마찰계수가 증가한다. 본 연구는 투수계수가 비교적 큰 모래와 화강풍화토에 박테리아를 접종, 배양한 후 투수계수의 변화를 측정하였으며, 배양된 바이오필름의 내화학성 및 온도변화에 대한 내구성 실험을 통해 대용 차수재로의 가능성을 평가하였다. 화강풍화토에 박테리아를 접종, 배양한 후 투수계수는 초기치와 비교하여 약 1/50 정도의 감소를 나타냈고, 산성 또는 염기성용액의 침투 이후에도 투수계수의 급격한 증가는 나타나지 않았다. 그러나 반복적인 동결-융해후 투수계수가 증가해 바이오필름으로 인한 공극의 폐색이 손상될 수 있음을 알 수 있었다.

• 한국환경과학회지
• /
• 제5권4호
• /
• pp.535-544
• /
• 1996

In the development of Molten Carbonate Fuel Cell, one of the serious problems is the dissolution of cathode material. Therefore, the development of the alternative cathode which is stable in molten carbonate is needed. In this research, the licoo, was chosen as alternative cathode material. $LiCoO_2$ powder was synthesized by high temperature calcination method and by citrate sol-gel method. And its structure and physical iharacteristics were analyzed by XRD, 1 R, TCA and porosimeter. The conductivity and solubility of $LiCoO_2$ electrode were also measured. Homogeneous $LiCoO_2$ Powder was obtained by citrate sol-Rel method at 445$^{\circ}C$, however, obtained above 75$0^{\circ}C$ by high temperature calcination method. Homogeneous particle size distribution and fine powder were obtained by the citrate sol-Rel method. $LiCoO_2$ electrode showed higher electric conductivity ($1.7 $\Omega$^{-1}cm^{-1}$) than NiO (0.1 $\Omega$^{-9} cm^{-1}) at $650^{\circ}C$. The solubilities of $LiCoO_2$ electrode in electrolyte were varies 0.6 to 1.0 ppm during 200 hours. So, the solubilities of $LiCoO_2$ were much lower than that of NiO.