• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.10
• /
• pp.901-909
• /
• 2013

Owing to the Increasing use of fossil fuels, worldwide concerns over environmental pollution are increasing. As a solution, ligneous biomass has emerged as a promising alternative fuel in recent times. Therefore, in this study, a moisture evaporation model that largely influences the energy density and efficiency of ligneous biomass is studied using a numerical approach. Furthermore, the thermal characteristics are analyzed in terms of torrefaction temperature and moisture fractions in the wood, and the type of wood species. The results show that the temperature and moisture fractions of wood decrease with an increase in the torrefaction temperature. In particular, when the torrefaction temperature is lower than 423K, there were little changes in the moisture fraction in the wood. Furthermore, it was found that charcoal is produced more slowly as the moisture fraction in the wood increases.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.188.2-188.2
• /
• 2011

The use of renewable energy sources is becoming increasingly necessary to minimize the problems derived from the global warming impacts caused by the utilization of fossil fuels as well as their limited supply and reservoir. Also, localized heavy rain has occurred in many areas. As a result, suspended wood waste is being inflow into the dam and the problem of waste disposal has occurred. It is a unique renewable and alternative source for the production of energy. The experiment using wood waste (dry weight 25.0g) was conducted for extraction sugars such as xylose, lactose and glucose. For the sugar extraction from wood waste, hydrolysis experiment using wood waste was conducted by two steps. First step was reacted with 72% sulfuric acid (24.0N and 37.5 ml) for 1hr at $30^{\circ}C$ and second step was reacted at $105^{\circ}C$ for one hour after adding 2.45times of hot water. Extracted sugar was used in the experiment of sugar consumption to estimate feasibility of ethanol production using yeast(P. Stipitis and S cerevisiae). As a result, sugar extracted from wood waste was effective consumed by yeast(P. Stipitis and S cerevisiae). The consumption rate by yeast was S. cerevisiae was faster than that of P. stipitis. It can be confirmed that resource as ethanol production using wood waste was available.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.181-187
• /
• 2008

Recently, alternative fuels are drawing more attentions due to the increasing need for lower emission characteristics and fuel consumption rate in automotive engines. The GTL(gas to luquid) is the one of most favored candidates. It has higher cetane number(more than 75) and almost negligible sulphur and aromatic contents. Therefore, enhanced emission characteristics are expected even in the application in diesel engines without any modification. In this study, the cylinder pressure and heat release, emission characteristics with fuel injection timings are compared between diesel and GTL fuel in the single cylinder diesel engine. Noticeable reduction in PM, THC and CO emission are observed due to lower sulphur and aromatic contents in GTL. Also, the ignition delay decreased due to higher cetane number of GTL, which slightly decreased the amount of NOx emissions. With the retards of main injection timing, NOx decreases more for the case of GTL, while the level of THC and CO emissions still remains lower than the case of diesel. Therefore, there is much room for the control of injection timing for NOx reduction without sacrificing THC and CO emissions. With the retards of main injection timing, Small size distribution of PM became lager and there amount increased. But from all conditions, size distribution of PM for the case GTL was lower than Diesel.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.3
• /
• pp.201-211
• /
• 2005

In this study, conventional head-end processes of spent TRISO fuel have been reviewed to develope more effective treatment methods. The main concerns in the TRISO treatment are to effectively separate the carbon and SiC contained in the TRISO particles. The crush-burn scheme which was considered in the early stages of the development has been replaced by the crush-leach process because of $^{14}C$ problems as a second waste being generated during the process. However, there are still many obstacles to overcome in the reported processes. Hence, innovative thermomechanical concepts and a molten salt electrochemical approach to breach the coating layers of the TRISO particle with a minimized amount of second waste are proposed in this paper and their principles are described in detail.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.1
• /
• pp.89-99
• /
• 2014

The cultivation of biomass crops is now global demand for decreasing emissions of carbon dioxide ($CO_2$) from fossil fuel. Miscanthus species have been studied as a suitable crop for biomass production, due to its characteristics of fast growth and high biomass. In Korea, Miscanthus species have gained wide attention as an option for biomass production alternative to fossil fuels, recently. New strain of giant Miscanthus has been developed and two large trial sites for the giant Miscanthus production were built in the lower reaches of the Geum River. To evaluate the ecological influence of the giant Miscanthus as an bioenergy crop for the future, we investigated the impact of the construction of the giant Miscanthus production fields on the biota and also compared it with biota in paddy fields near the study sites. The biota including plants, amphibians, reptiles, mammals, avifauna, insects, and bugs was investigated. The plant diversity of the giant Miscanthus production fields was poorer than the paddy fields because the high height of the giant Miscanthus might hinder the growth of other plants. However, the giant Miscanthus production fields serves habitat to animals, leading to rich diversity of animals including avifauna, insects, and bugs. The rich diversity of the animals in the giant Miscanthus production fields coincides with the fact that the giant Miscanthus was grown without any pesticide, herbicide, and fertilizer. This study showed that the giant Miscanthus can influence on biota and further long term study is needed to elucidate the interaction between the diversity of biota and the giant Miscanthus.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.506-510
• /
• 2004

Our fossil fuels will be exhausted and replaced with renewable energies over tile next few decades. And rapidly increasing consumption of primary makes every country recognize the potential significance of climate change and necessity of greenhouse gas reduction. A critical part of the solution is to ratify the Kyoto Protocol and the UNFCC, and to develop and utilize the wind energy. One of the renewable energies, wind energy is increasing competitive in liberalised energy markets and shows annual growth rate of $20\~30\% in past five years. Thus, the purpose of this paper is to describe the necessity and characteristics of wind energy industries, to compare the international development policies of wind energy industries, and to suggest and discuss the alternative development policies of wind energies in Korea

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.2
• /
• pp.96-104
• /
• 2015

Fischer Tropsch reaction is one of the interesting topic for renewable and clean energy. Polymerization of carbon monoxide or carbon dioxide with hydrogen over metal supported catalyst can produce long chain hydrocarbons. Synthetic liquid hydrocarbons are promising alternative to fossil fuels. This research work has been focused on the synthesis of Fe based catalyst for Fischer Tropsch reaction. Mesoporous silica (MS) support prepared by a precipitation method using two different washing solution, distilled water (DW) and acid in ethanol solution (ET), and different calcination temperature. Then, Fe/MS was prepared by an incipient wetness impregnation method. All of samples were systematically characterized using various physical and chemical techniques. TEM and XRD analysis were used to ensure that the cubic Ia3d mesostructure is stable after calcination. FTIR spectra are useful to ascertain the existence of template in the support. TPR studies were also used to understand the nature of Fe species and their reducibility. The results reveal that washing the support with distilled water and calcination at $550^{\circ}C$ can efficiently remove the triblock copolymer templates. The existence of template in the support affects the textural properties of all catalyst investigated.

• Journal of Forest and Environmental Science
• /
• v.31 no.3
• /
• pp.164-176
• /
• 2015

Cyathea gigantea is a tree fern distributed throughout humid tropical regions of northeast India and other parts of the country. However, wild populations of this species are largely affected by various natural and anthropogenic activities. Therefore, an attempt was made to study the population structure and regeneration status of C. gigantea in and around greater Itanagar area of Papum Pare district, Arunachal Pradesh. Altogether 45 patches, ranging from 19.63 to $260m^2$ of area, were randomly sampled to study population structure and regeneration status of the species. Population study showed highest number of youngs in the height class of 0.50-0.75 m while, immatures were recorded highest in the height class of 2.0 to 2.5 m. Majority of the matures belonged to 6-9 m height class while it was recorded maximum in the diameter class of 10-15 cm. Average density of C. gigantea was $0.07individuals\;ha^{-1}$ which varied greatly among different patches with a range of 2 to 14. Significant correlations were found between patch size and density of youngs, immatures, matures and total density. Maximum concentration of youngs was observed in patch size $60-140m^2$, while for immatures, it was highest in patch size $20-160m^2$. Similarly, highest concentration of matures was observed in patch size $20-80m^2$ and $80-180m^2$. Population structure of the total population exhibited inverted pyramid shaped distribution. Population structure consisting of youngs, immatures, matures showed that around 60% patches lack of regenerating individuals which depict very poor natural regeneration of the species. Effective conservation strategies are therefore to be formulated to save C. gigantea from the threat of extinction in near future.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.3
• /
• pp.183-196
• /
• 2017

The research efforts directed at advancing water electrolysis technology continue to intensify together with the increasing interest in hydrogen as an alternative source of energy to fossil fuels. Among the various water electrolysis systems reported to date, systems employing a solid polymer electrolyte membrane are known to display both improved safety and efficiency as a result of enhanced separation of products: hydrogen and oxygen. Conducting water electrolysis in an alkaline medium lowers the system cost by allowing non-platinum group metals to be used as catalysts for the complex multi-electron transfer reactions involved in water electrolysis, namely the hydrogen and oxygen evolution reactions (HER and OER, respectively). We briefly review the anion exchange membranes (AEMs) and electrocatalysts developed and applied thus far in alkaline AEM water electrolysis (AEMWE) devices. Testing the developed components in AEMWE cells is a key step in maximizing the device performance since cell performance depends strongly on the structure of the electrodes containing the HER and OER catalysts and the polymer membrane under specific cell operating conditions. In this review, we discuss the properties of reported AEMs that have been used to fabricate membrane-electrode assemblies for AEMWE cells, including membranes based on polysulfone, poly(2,6-dimethyl-p-phylene) oxide, polybenzimidazole, and inorganic composite materials. The activities and stabilities of tertiary metal oxides, metal carbon composites, and ultra-low Pt-loading electrodes toward OER and HER in AEMWE cells are also described.

• Journal of Environmental Health Sciences
• /
• v.38 no.4
• /
• pp.277-290
• /
• 2012

Objectives: Diesel engine exhaust (DE) accounts for a significant percentage of air pollutants that are associated with various health outcomes including mortality, asthma, chronic bronchitis, respiratory tract infection, etc. In June, 2012, the International Agency for Research on Cancer (IARC) released the assessment results that classified DE as "carcinogenic to humans" (Group 1). This review is therefore focused on the lung cancer risks of DE. Methods: Literatures were searched using PubMed with key words of "diesel exhaust", "lung cancer", and other related terms for the period between 1990 and 2012. A total of 295 articles were searched and sixteen epidemiologic studies were identified as potentially relevant. Results: Sixteen epidemiologic studies about the lung cancer risks of workers exposed to DE in various occupations were summarized in two tables, 1) retrospective cohort studies and 2) case-control studies. Increased lung cancer risk, although not always smoking adjusted, was observed in 6 out of 8 retrospective cohort studies and 4 of 8 case-control studies. Conclusions: Diesel fuel is widely used in Korea. Exposure to DE is confirmed to be a human carcinogen by IARC. Noncancer health risks of DE also need careful attention as DE is a major source of fine-particle pollution. Along with the efforts for reducing the DE emission through improvements of diesel engines and fuel, and the use of alternative fuels, comprehensive health risk assessment of DE should be conducted to minimize the adverse health effects.