• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.243-248
• /
• 2008

The purpose of this study is to introduce alternative cost-effectiveness analysis method of DSM investment programs. This alternative method is Value Test method which consider the effects of DSM investment program on customer value. And this method was applied for actual DSM investment program in natural gas domain. By utilize this method to evaluate cost-effectiveness of DSM investment programs, it is expected to make right decision to enforce and complement those programs.

• Nuclear Engineering and Technology
• /
• 제31권5호
• /
• pp.465-475
• /
• 1999

The objective of the present work is to assess the analysis capability of two wall film condensation models, the default and the alternative models, of RELAP5/MOD3.2 on condensation experiments in the presence of noncondensable gas in a vertical tube of PCCS of CP-1300. In the calculation of a base case the default model of RELAP5/MOD3.2 under-predicts the heat transfer coefficients, and Its alternative model over-predicts them throughout the condensing tube, Also, both models over-predict the void fractions. The nodalization study shows that the variation of the node number does not change both modeling results of RELAP5/MOD3.2 Sensitivity study for varying input parameters shows that the inlet steam-air mixture flow rate, the inlet air mass fraction, and the inlet saturated steam temperature give significant changes of their heat transfer coefficients Run statistics show that the grind time of the default model is always higher than that of the alternative model by about 23%.

• 한국대기환경학회지
• /
• 제24권2호
• /
• pp.189-195
• /
• 2008

We developed emission factors for alternative fuels used in cement industries in Korea and also estimated reduction in emissions of greenhouse gas (GHG) by the use of alternative fuels. Emission factors for GHG of waste tire, waste plastic, waste oil and RDF were estimated to be about 89, 78, 77 and 95 ton $CO_2$/TJ respectively. When compared with previous studies, most of the results showed similar trends. The calorific value estimation and elemental analysis for energy source were implemented in order to estimate the exact emission factors and the reduction of GHG emissions using alternative fuel. In the case of 'A' company, $CO_2$ emission from alternative fuels was about 4% lower than that of bituminous coal only. Also in case of company 'B', $CO_2$ emission from alternative fuels was about 1.4% lower than that of only bituminous coal. In Germany and Japan, alternative fuel is not regarded to be fuel consumption in cement industry. When applying this rule, the emission reductions were about 4.3% for company 'A' and 6.3% for company 'B'. The results of this study may be considered as a useful information for developing strategies in reducing GHG emissions.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2005년도 추계학술발표회 논문집
• /
• pp.141-145
• /
• 2005

DME (Di-Methyl Ether) is a new clean fuel and an environmental-friendly energy resource, also is recently increasing with an alternative interest because of the industrial use. DME has been shown to have excellent properties as a diesel fuel giving emission level better than ULEV standard. So it has been attracting considerable as an alternative diesel fuel. In this study, we carried out simulation of separation and purification process of demo plant for 101on per day DME production, which cause the effect that is important in productivity, from operation results of pilot plant for 50kg per day DME production. The liquefied stream, which was separated by gas-liquid separator after DME reactor, includes $CO_2$, DME, Methanol and $H_2O$. We established three distillation columns for separation and purification of the stream. $CO_2$ was extracted from the stream by first distillation column, DME was extracted by second column and Methanol was extracted by third column. We investigated and analyzed the effect which the actual operation variables cause in efficiency of process and optimized process, finally we got the DME of purity $100\%$.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.9-19
• /
• 2003

Exhaust emissions were characterized for a fleet of 10 alternative-fuel vehicles (AFVx) including 5 compressed natural gas (CNG) vehicles. 3 liquefied petroleum gas (LPG) vehicles and 2 85% methanol/15% California Phase 2 gasoline (M85) vehicles. In addition to the standard regulated emissions and detailed speciation of organic gas compounds, Fourier Transform Infrared Spectroscopy (FTIR) was used to measure ammonia (NH$_3$) and nitrous oxide ($N_2$O) emissions. NH$_3$, emissions averaged 0.124 g/mi for the vehicle fleet with a range from <0.004 to 0.540 g/mi. $N_2$O emissions averaged 0.022 g/mi over the vehicle fleet with range from <0.002 to 0.077 g/mi. Modal emissions showed that both NH$_3$, and $N_2$O emissions began during catalyst light-off and continued as the catalyst reached its operating temperature. $N_2$O emissions primarily were formed during the initial stages of catalyst light-off. Detailed speciation measurements showed that the principal component of the fuel was also the primary organic gas species found in the exhaust. In particular, methane, propane and methanol composed on average 93%, 79%, and 75% of the organic gas emissions, respectively, for the CNG, LPG. and M85 vehicles.

• 조명전기설비학회논문지
• /
• 제25권2호
• /
• pp.131-136
• /
• 2011

This paper aims to examine the possibility of using an environmentally friendly $N_2$ as an alternative gas to $SF_6$. For this purpose, we have investigated breakdown characteristics of $N_2$ under impulse voltages in a quasi-uniform electric field gap. The 1.2/50[${\mu}s$] lightning impulse voltage, switching impulse voltages and oscillatory impulse voltages were applied at the test gap. The electric field utilization factor ranges from 0.5 to 0.8. The experimental data of $SF_6$ and $N_2$ acquired in the same experimental condition are presented in parallel for comparison. As a result, the breakdown voltages in $SF_6$ and $N_2$ are linearly increased with the gas pressure, also the breakdown voltages in $N_2$ are increased with increasing the gap distance and electric field utilization factor. The positive breakdown voltages are higher than the negative breakdown voltages. The nagative basic lightning impulse withstand level of 150[kV] in $N_2$ of about 0.5[MPa] is nearly equal to that in $SF_6$ of 0.15[MPa]. It is seen from the results obtained in this work that $N_2$ can be used as an eco-friendly alternative gas to $SF_6$ in distribution power equipment.

• 한국가스학회지
• /
• 제19권6호
• /
• pp.34-39
• /
• 2015

최근 차량용 에너지의 소비는 대부분 화석연료로부터 사용된다. 기존 화석 연료를 사용하는 자동차보다 친환경적이며 저렴하고 재생이 가능한 연료의 요구증대로 대체연료 자동차산업이 강조되고 있다. 오늘날 고옥탄가와 높은 자기발화온도 특징을 가지고 있는 천연가스는 저렴한 비용, 기존 화석연료보다 풍부한 매장으로 기존 스파크 점화엔진인 가솔린엔진의 대체에너지로 간주되고 있다. 본 연구는 기존 2리터 가솔린 엔진에 CNG 가스 분사시스템을 장착하여 전소 및 혼소 연료분사시스템을 설치하였다. 또한 CNG전소 및 가솔린/CNG 혼소차량의 ECU 제어전략을 최적화 하였다. 혼소차량에 대하여 NEDC모드 주행결과 가솔린 차량 대비 혼소차량의 CO2 저감율을 16%확인하였다. 또한 CO와 HC의 배기가스 배출량은 가솔린 차량과 동등한 수준을 확보하였다. 하지만 NOx의 배기가스 배출수준은 증가된 현상을 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.1-6
• /
• 2003

Natural gas is one of the promising alternative fuels because of the abundant deposits and the cleanness of emission gas. CNG has a lot of merits except lower burning speed has a slow disadvantage. One way to overcome the disadvantage is to raise a turbulence intensity. We give various intake for changing turbulence intensity in the cylinder by three kinds of swirl control valve with a way to raise a turbulence intensity. In the present study, a $1.8\ell$ conventional gasoline engine is modified to use a CNG as a fuel instead of gasoline. We try to virify combustion and emission characteristics in each engine parameters. Parameters of experimentation are equivalence ratio, spark timing and intake flow change. The results of this study are as swirl flows. In the case of adding swirl flow, burning speed and torque are increased. But NOx and THC concentration are increased a little respectively.

• Asian Journal of Atmospheric Environment
• /
• 제8권1호
• /
• pp.59-68
• /
• 2014

The Fukushima nuclear accident in 2011 had an extensive impact on the national electricity plans. This paper outlines alternative electricity scenarios that meet the goals of nuclear phase-out and greenhouse gas (GHG) emission reduction. This paper also analyzes the results of each scenario in respect to the electricity mix, GHG emissions, costs and employment effects. The Long-range Energy Alternatives Planning system (LEAP) model was used to simulate the annual electricity demand and supply system from 2011 to 2030. The reference year was 2009. Scenarios are reference (where existing plans are continued), A1, A2, B1, B2, and C2 (where the levels of demand management and nuclear phase-out are different). The share of renewable energy in the electricity mix in 2030 for each scenario will be increased from about 1% in 2009 to 8% in the reference scenario and from 11% to 31% in five alternative scenarios. Total cumulative cost increases up to 14% more than the reference scenario by replacing nuclear power plants with renewable energy in alternative scenarios could be affordable. Deploying enough renewable energy to meet such targets requires a roadmap for electricity price realization, expansion of research, development and deployment for renewable energy technologies, establishment of an organization dedicated to renewable energy, and ambitious targets for renewable energy.

• 화약ㆍ발파
• /
• 제27권2호
• /
• pp.56-60
• /
• 2009

물리학적 측면에서 에너지의 개념은 일하는 능력으로 정의된다. 기존의 석탄 석유등 화석연료를 대체하기 위해 1980년 이후부터 천연가스 원자력 등의 사용이 증가하였으나 환경오염문제로 태양열 풍력 조력 지열 등 대체에너지로의 전환을 촉진하고 있다. 그러나 에너지 이용효율 측면에서는 원자력 에너지와 화약 가스 등 화학에너지와는 비교가 되지 않는다. 본 논문에서는 환경(대체)에너지의 한계점을 뛰어 넘을 수 있는 방안을 연구하기 위하여 그린에너지의 현황을 조사하였으며, 고효율 에너지원에 대한 청정화와 응용 및 개발방향에 대해 검토, 연구 하였다.