• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.32-40
• /
• 2001

In this paper, we propose a high-speed modular multiplication algorithm which revises conventional Montgomery's algorithm. A hardware architecture is also presented to implement 1024-bit RSA cryptosystem for digital signature based on the proposed algorithm. Each iteration in our approach requires only one addition operation for two n-bit integers, while that in Montgomery's requires two addition operations for three n-bit integers. The system which is modelled in VHDL(VHSIC Hardware Description Language) is simulated in functionally through the use of $Synopsys^{TM}$ tools on a Axil-320 workstation, where Altera 10K libraries are used for logic synthesis. For FPGA implementation, timing simulation is also performed through the use of Altera MAX + PLUS II. Experimental results show that the proposed RSA cryptosystem has distinctive features that not only computation speed is faster but also hardware area is drastically reduced compared to conventional approach.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.4
• /
• pp.41-49
• /
• 2004

In this paper, a design and measurement method for FPGA embedded gigabit-transceiver is presented. Altera's Stratix GX device which is general purpose transceiver called GXB was used for implementing PCI Express transceiver. PCI Express is the generation high performance serial I/O bus used to interconnect peripheral devices. After GXB was set follow by PCI Express specifications, the design has been verified by timing simulation and implemented as hardware. We tested it as follow. First GXB internal digital and analog block test second GXB transmitter signal integrity test called Eye mask test, third GXB high-speed serial I/O buffer and on-chip termination test and the last GXB protocol test. This paper shows all the design and measurement procedure about FPGA embedded gigabit-transceiver.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.69-78
• /
• 2001

This paper presents the design and FPGA implementation of a FLEX PSP(Protocol Signal Processor) for the portable high speed paging system. In this approach, two algorithms are newly proposed for implementing the PSP which provides capabilities of the maximum 6,400bps at speed, high-channel throughput, real time error correction and an effective frame search function. One is an accurate symbol synchronization algorithm which is applied for synchronizing the interleaved 4-level bit symbols which are received at input stage of A/D converter, and the other is a modified fast decoding algorithm which is provided for realizing double error correction of (31,21)BCH signal. The PSP is composed of six functional modules, and each module is modelled in VHDL(VHSIC Hardware Description Language). Both functional simulation and logic synthesis have performed for the proposed PSP through the use of Synopsys$^{TM}$ tools on a Axil-320 Workstation, and where Altera 10K libraries are used for logic synthesis. From logic synthesis, we can see that the number of gates is about 2,631. For FPGA implementation, timing simulation is performed by using Altera MAX+ PLUS II, and its results will be also given. The PSP which is implemented in 6 FPGA devices on a PCB has been verified by means of Logic Analyzer.r.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.273-278
• /
• 2012

In this contribution, we design and implement an SPI hardware interface for the microprocessor to communicate with the MMC (Multi-Media Card) in an embedded system. Proposed architecture is compatible with the APB in AMBA bus architecture. Embedding OS in an embedded system means a big burden in terms of hardware and software ending up with performance decline. In this paper, we adopt the concept of SPI communication without using OS in the embedded system and implement in a form of FPGA chip. The designed SPI module was automatically synthesized, placed, and routed. Implementation was performed through the Altera FPGA and well operated at 25MHz clock frequency, which satisfied our target speed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1702-1708
• /
• 2007

Dragon Stream Cipher is proposed for software base implementation in the eSTREAM project. Now this stream cipher is selected as a phase 3 focus candidate. Dragon is a new stream cipher contructed using a single word based NIFSR(non-linear feed back shift register) and 128/256 key/IV(Initialization Vector). Dragon is the keystream generator that produce 64bits of keystream. In this paper, we present an implementation of Drag(m stream cipher algorithm in hardware. Finally, the implementation is on Altera FPGA device, EP3C35F672I and the timing simulation is done on Altera's Quartus II. A result of 111MHz maximum clock rate and 7.1Gbps is throughput is obtained from the implementation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2317-2321
• /
• 2011

This paper is proposed new data crytoblock algorithm based on the private key cryptoalgorithim with existed other cryptography algorithims. Therefore new crytoblock design and simulation using the common Synopsys and ALTERA Max+ PlusII Ver.10.1. As a simulation result, new data crytoblock have gate counting 640Mbps at the 40M hz. We thought that proposed new data crytoblock adapt real time information security.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.327-331
• /
• 2008

본 논문에서는 ALtera Cyclone II FPGA와 VGA Controller, ISP1362 Host Controller, DM9000A Ethernet Controller를 사용하여 FPGA를 구성하고, ${\mu}Clinux$를 포팅하여 Nano-X 기반에서 JPEG 파일을 디스플레이 시키는 임베디드 디지털 액자를 구현한다. 구현한 시스템은 일반적인 마이크로프로세서를 사용하지 않고 Altera 사의 Cyclone II FPGA를 이용해 직접 프로세서를 설계하고, ISP1362 Host Controller를 이용하여 USB 드라이브를 인식하며, DM9000A를 통해 웹과 연결하여 웹서버로부터 전송되어진 JPEG 이미지를 Display 할 수 있도록 설계하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.438-441
• /
• 2000

In this paper, Turbo rode is describing a performance near the Shannon's channel capacity limit. So, basic theory of turbo code and MAP,Log-MAP decoding algorithm was arranged. The foundation of this using VHDL, Log-MAP turbodecoder was implemented by Altera´s FLEX10K CPLD.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.675-676
• /
• 2012

In this paper, we are implemented the signal measurement system based on FPGA. The proposed hardware was mapped into Cyclone III from Altera and used 1,700(40%) of Logic Element (LE). The implemented circuit used 24,576-bit memory element with 6-bit input signal. The result from implementing in hardware (FPGA) could operate stably in 140MHz.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.849-852
• /
• 2000

본 논문에서는 RSA 암호 시스템의 Montgomery 모듈러 곱셈 알고리듬을 개선한 고속 모듈러 곱셈 알고리듬을 제안하고, Hybrid 구조의 가산기를 사용한 고속 모듈러 곱셈 알고리듬의 설계에 관하여 기술한다. 기존 Montgomery 알고리듬에서는 부분합계산시 2번의 덧셈연산이 요구되지만 제안된 방법에서는 단지 1번의 덧셈 연산으로 부분 합을 계산할 수 있다. 또한 덧셈 연산 속도를 향상시키기 위하여 Hybrid 구조의 가산기를 제안한다. Hybrid 가산기는 기존의 CLA(Carry Look-ahad Adder)와 CSA(Carry Select Adder)알고리듬을 혼합한 구조를 기본으로 하고 있다. 제안된 고속 모듈러 곰셈기는 VHDL(VHSIC Hardware Description Language)을 이용하여 모델링하였고, $Synopsys^{TM}$사의 Design Analyzer를 이용하여 논리합성(Altera 10K lib. 이용)을 수행하였다. 성능 분석을 위하여 Altera MAX+ PLUS II 상에서 타이밍 시뮬레이션을 수행하였고, 실험을 통하여 제안한 방법의 효율성을 입증하였다.