• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.205-213
• /
• 1987

본 논문에서는 비압축 선형 점탄성재료를 원통체로 모델화하여 열하중에 대한 거동을 점유적 시간증분과정을 적용하여 수치해를 제시하고 원통체를 제작실험하여 변 형과 비파괴검사를 통해 측정하여 비교검토하였다. 또한 이론적 수치해와 시편과의 안전율을 각 파괴기준(failure criteria)에 적용하여 비파괴검사결과와 비교하였다.

• Computers and Concrete
• /
• 제20권6호
• /
• pp.719-729
• /
• 2017

A considerable research is available on the seismic response of Reinforced Concrete (RC) shear wall-frame buildings, but the studies on the reliability of such buildings, with the consideration of human error, are limited. In the present study, a detailed procedure for reliability assessment of RC shear wall-frame building subjected to earthquake loading against serviceability limit state is presented. Monte Carlo simulation was used for the reliability assessment. The procedure was implemented on a 10-story RC building to demonstrate that the shear walls improve the reliability substantially. The annual and life-time failure probabilities of the studied building were estimated by employing the information of the annual probability of earthquake occurrence and the design life of the building. A simple risk-based cost assessment procedure that relates both the structural life-time failure probability and the target reliability with the total cost of the building was then presented. The structural failure probability (i.e., the probability of exceeding the allowable drift) considering human errors was also studied. It was observed that human error in the estimation of total load and/or concrete strength changes the reliability sharply.

• 대한조선학회논문집
• /
• 제47권5호
• /
• pp.703-708
• /
• 2010

Recently, the development of the Marina port is determined as a national plan, and a variety of leisure boats and facilities on the field has been of critical interest. In particular, yachts are designed and produced mostly at small shipbuilding companies and research institute. The regulation and historic data, however, about the safety of structure are not readily available. Therefore, it is required to evaluate the strength of ship structure. This paper deals with the estimation of local strength of 40 feet sailing yacht by using finite element analysis. The forebody, mast and connection parts of a FRP yacht structure are evaluated. In addition, the results are compared with the regulation of Lloyd's register and Korean register.

• 대한건축학회논문집:구조계
• /
• 제33권12호
• /
• pp.29-36
• /
• 2017

A recent global trend in the increase of earthquake-related disasters has become so frequent as to cause various damages to a wide range of mid- to high-rise buildings. Particularly, more attention is being paid to the effect of horizontal load in high-rise buildings not only on the key structural elements of the structures, but also on the possibility of the secondary damages to them due to the failure of exterior panels, which are non-structural elements, but such damages are difficult to cope with as they may be caused by unexpected changes. The present study examined exterior panels using moving clips to prevent such secondary damages on the non-structural elements and analyzed the structural performance of these exterior panels through the finite element analysis and the shaking table test. The analysis results showed that the exterior panels using moving clips satisfied the structural performance against the allowable story drift of KBC2009 and the safety of the exterior panels was verified by the shake table test.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.8-14
• /
• 2021

Even welds that have passed non-destructive testing in the case of brittle crack arrest steel materials will actually have very fine weld defects. Based on studies showing that these defects adversely affect the structure if subjected to a certain period of load, the following conclusions were obtained by conducting CTOD tests on welding joints of high-strength BCA materials, structures comprising the upper decks of a large container vessel. First of all, the fatigue pre-cracking in the weld metal and heat affected areas was tested and the behavior was identified. Both parts of the welding joint are allowable range for the class regulations. In addition, CTOD results showed that the CTOD value in the heat affected area was more than 0.5 times higher than in the weld metal area.

• Wind and Structures
• /
• 제37권3호
• /
• pp.245-254
• /
• 2023

In this paper, the wind-induced response of Jiayuguan wooden building (world cultural heritage) in Northwest China was studied. ANSYS finite element software was used to establish four kinds of building models under different working conditions and carry out modal analysis. The simulation results were compared with the field dynamic test results, obtaining the model which reflects the real vibration characteristics of the wooden tower. Time history data of fluctuating wind speed was obtained by MATLAB programming. Time domain method and ANSYS were used to analyze the wind-induced vibration response time history of Jiayuguan wooden building, obtaining the displacement time history curve of the structure. It was suggested that the wind-induced vibration coefficient of Jiayuguan wooden building is 1.76. Through analysis of the performance of the building under equivalent static wind load, the maximum displacement occurs in the three-story wall, gold column and the whole roof area, and the maximum displacement of the building is 5.39 cm. The ratio of the maximum stress value to the allowable value of wood tensile strength is 45 %. The research results can provide reference for the wind resistant design and protection of ancient buildings with similar structure to Jiayuguan wooden tower.

• 한국공간구조학회논문집
• /
• 제22권4호
• /
• pp.23-30
• /
• 2022

It is effective to apply hybrid damping device that combine separate damping device to cope with various seismic load. In this study, HRS hybrid damper(hybrid rubber slit damper) in which high damping rubber and steel slit plate are combined in parallel was proposed and structural performance tests were performed to review the suitability for seismic performance. Cyclic Loading tests were performed in accordance with criteria presented in KDS 41 17 00 and MOE 2019. As a result of the test, the criteria of KDS 41 17 00 and MOE2019 was satisfied, and the amount of energy dissipation increased due to the shear deformation of the high-damping rubber at low displacement. Result of performing the RC frame test, the allowable story drift ratio was satisfied, and the amount of energy dissipation increased in the reinforced specimen compared to the non-reinforced specimen.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.54-63
• /
• 2018

본 연구에서는 고속도로 도로부의 표준단면을 대상으로 패널식 보강토 옹벽의 높이별 안전율과 경제성에 대해 비교 검토하였다. 설계기준에 따라 하중조건은 고속도로의 단면 및 형상조건을 고려하여 콘크리트 포장의 사하중과 차량하중을 재하하고 최상단 보강재의 경우 방호벽의 충돌하중을 고려하였다. 보강재의 길이는 보강토 옹벽의 높이에 따라 0.9H로 배치하였기 때문에, 보강토체의 형상에 따라 지배되는 외적 안정성에 대해 높이의 증가에 따른 영향은 거의 없는 것으로 나타났다. 지지력에 대한 안전율은 보강토 옹벽의 높이에 따라 자중이 증가되기 때문에 급격히 감소되었다. 복합중력식 설계법에 따른 내적 안정성을 검토한 결과, 인발 안전율은 증가되고 파단 안전율은 감소되었다. 보강토 옹벽의 높이가 증가될수록 활동력으로 작용되는 수평토압과 저항력으로 작용되는 수직토압이 함께 증가되기 때문에 인발의 안전율은 증가되었다. 돌기형 강재 보강재의 장기 허용인장력은 상수이기 때문에, 높이에 따라 활동력에 대한 안전율은 수평토압이 증가되어 감소되었다. 블록식 보강토 옹벽보다는 패널식 보강토 옹벽의 경제성이 우수한 것으로 나타났고, 기존 옹벽과 비교하면 5.0 m이상의 높이에서 패널식 보강토 옹벽의 경제성이 가장 우수한 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제20권6호
• /
• pp.765-772
• /
• 2008

철근콘크리트 구조물은 일반적으로 재료적 특성에 따른 크리프 및 건조수축으로 인하여 장기변형이 발생하며, 이러한 변형으로 인한 구조물의 처짐을 허용 한계 이하로 유지시키는 것이 사용성 확보 측면에서 중요하다 할 수 있다. 노후된 RC보의 성능 개선을 위하여 다양항 보수 보강 방법이 사용되고 있으며 이중 대표적인 방법으로 FRP 외부부착 공법이 있다. 재료적인 성질이 우수한 FRP는 RC구조물의 보강 재료로써 현재 널리 사용되고 있으며, 일시적인 하중 뿐만 아니라 지속 하중 하에서도 향상된 보강 성능을 제공해야 한다. 따라서 FRP가 외부 부착된 RC 부재에 지속 하중이 작용할 때 콘크리트의 크리프 및 건조수축의 영향으로 인한 시간 의존적 장기 거동을 정확히 예측하는 방법이 필요하다. 본 논문에서는 FRP가 외부 부착된 RC보의 장기 처짐 예측을 위해서, CFRP와 GFRP로 보강된 실험체를 제작하고, 25 kN의 지속하중을 470일간 가하여 시간 변화에 따른 처짐을 측정하였다. 또한, 이러한 처짐의 예측을 위하여 ACI-209 code 및 CEB-FIP code에 근거하여 크리프계수와 건조수축변형률을 산정하였으며, EMM과 AEMM을 사용한 ACI-318기준, Branson's method 그리고, Mayer's method를 사용하여 FRP가 외부 부착된 RC보의 장기 처짐을 예측하였다. 실험 결과, CFRP보 보강된 실험체가 가장 높은 장기 사용성을 보였으며, Mayer's method가 장기처짐에 대한 실험값을 가장 근사하게 예측한다는 것을 확인할 수 있었다.

• 한국물환경학회지
• /
• 제36권5호
• /
• pp.385-391
• /
• 2020

Soil loss is a serious problem frequently caused by local torrential rainfalls due to climate change. In particular, soil loss is occurring in agricultural areas rather than urban areas, and many pollutants are introduced into rivers, causing environmental problems. To reduce soil loss, the Ministry of Environment has designated and managed non-point source management areas. The Jaun-district in Hongcheon-gun, which was designed as a non-point pollution source management area in Gangwon-do, is located in the upper stream of Soyang Lake. Most of the agricultural fields are composed of highland agriculture fields. The highland agricultural fields in the Jaun-district are also composed of large-scale farming areas, and the ditches located near the agricultural fields have been illegally used for farmland. Therefore, the local government in Hongcheon-gun is conducting a project to restore the ditches occupied by agricultural fields. However, an analysis of the amount of soil loss that can be reduced by the restoration of the ditches has not been conducted yet. Thus, the purpose of this study was to analyze the effect of reducing the soil loss from the restoration of the ditches used as agricultural fields in the Jaun-district. The SATEEC L Module was used to analyze the reduction in soil loss by ditch restoration. The SATEEC L Module was constructed to estimate the LS factor using Moore and Burch's method after calculating the slope length using the digital elevation model and the maximum allowable slope length. The LS factor and the USLE formula were used to estimate the amount of soil loss that could be reduced by ditch restoration. The analysis showed that the ditch restoration could reduce about 16.6% of the soil loss in the Jaun-district. The results of this study will contribute to the study of methods to reduce soil loss in non-point pollution management areas.