Browse > Article
http://dx.doi.org/10.4334/JKCI.2008.20.6.765

A Prediction of the Long-Term Deflection of RC Beams Externally Bonded with CFRP and GFRP  

Kim, Sung-Hu (Dept. of Civil and Environmental Engineering System, Sungkyunkwan University)
Kim, Kwang-Soo (Dept. of Civil and Environmental Engineering System, Sungkyunkwan University)
Han, Kyoung-Bong (Dept. of Civil and Environmental Engineering System, Sungkyunkwan University)
Song, Seul-Ki (Dept. of Civil and Environmental Engineering System, Sungkyunkwan University)
Park, Sun-Kyu (Dept. of Civil and Environmental Engineering System, Sungkyunkwan University)
Publication Information
Journal of the Korea Concrete Institute / v.20, no.6, 2008 , pp. 765-772 More about this Journal
Abstract
For RC structures, long-term deformation occurs due to the inherent characteristics, which are creep and shrinkage. In terms of serviceability, it is important to limit deflection caused by the deformation to the allowable deflection. In the recent years, various repair and strengthening methods have been used to improve performance of the existing RC structures. One of the typical methods is FRP externally bonded method (EBR). Fiber reinforced polymer (FRP) has been used worldwide as repair and strengthening materials due to its superior properties. Besides, it has to offer improved strengthening performance not only under instantaneous load but sustained load. Therefore, accurate prediction method of deflection for the RC members externally bonded with FRP under sustained load is required. In this paper, three beams were fabricated. Two beams were externally strengthened with one of CFRP plate and GFRP plate respectively. Total three beams were superimposed under sustained load of 25 kN. During 470 days, deflections at midspan were obtained. Moreover, creep coefficients and shrinkage strains were calculated by using ACI-209 code and CEB-FIP code. In order to predict the deflection of the beams, EMM, AEMM, Branson's method and Mayer's method were used. Through the experiment, it was found that the specimen with CFRP plate has the most flexural capacity and Mayer's method is the most precise method to predict total long-term deflections.
Keywords
FRP; CFRP; GFRP; long-term deflection; creep;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 김광수, 김진율, 김성후, 박선규, 'CFRP 플레이트로 보강된 철근콘크리트 보의 정적 및 피로 거동 특성,' 한국구조물진단학회, 12권, 4호, 2008, pp. 141-148
2 Tan K. H. and Saha M. K., 'Long-Term Deflections of Reinforced Concrete Beams Externally Bonded with FRP System,' Journal of Composites for Construction, ASCE, Vol. 10, No. 6, 2006, pp. 474-482   DOI   ScienceOn
3 Ghali A., Farve R. Concrete Structures : Stresses and Deformations, Chapman and Hall, London, 1986
4 Mayer, H., 'Dei Berechnung der Durchbiegung von Stahlbeton- Bauteilen,' Deutscher Ausschuss Fur Stahlbeton, No. 194, 1976
5 KS F 2405, 콘크리트의 압축강도 시험 방법, 한국표준협회, 2005
6 Branson D. E., Deformation of Concrete Structures, McGraw- Hill Book Co., New York, 1977
7 CEB-FIP Model Code, Comietee Euro-International Du Beton, 1990
8 ACI Committee 209R, Prediction of Creep, Shrinkage and Temperature Effect in Concrete Structures, American Concrete Institute, Detroit, Michigan, 1992
9 ACI Committee 318, Building Code Requirements for Reinforced Concrete and Commentary, American Concrete Institute, Detroit, Michigan, 2002
10 Neville A. M., Dilger W. H., and Brooks J. J., Creep of Plain and Structural Concrete, Construction Press, London and New York, 1983
11 Bazant Z. P., 'Prediction of Concrete Creep Effects Using Age-Adjusted Effective Modulus Method,' ACI Journal, Vol. 69, No. 4, 1972, pp. 212-217
12 김진율, 김광수, 박선규, 이영재, 'CFRP가 보강된 철근 콘크리트 보의 거동과 연성,' 콘크리트학회 논문집, 19 권, 2호, 2007, pp. 225-231   과학기술학회마을   DOI
13 지상규, 윤현도, 김선우, 이언영, '순환골재를 사용한 철근콘크리트 보의 장기 처짐 특성 및 평가,' 콘크리트학회 논문집, 20권, 1호, 2008, pp. 43-50   DOI
14 Gilbert R. F., 'Deflection Calculation for Reinforced Concrete Structures-Why We Sometimes Get It Wrong,' ACI Journal, Vol. 96, No. 6, 1999, pp. 1027-1032