• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.2
• /
• pp.95-106
• /
• 1998

Volatile organic compounds (VOCs) from Ca to C9 were investigated with nine ambient air samples collected in April 26, August 17, 1996 and January 23, 1997 in a Seoul site. On each sampling day, three 2-hr integrated canister samples were collected in early morning, early afternoon and late afternoon, respectively to study temporal . variation of VOCs. Most of VOC species showed diurnal variation with higher concentrations in the early morning and lower concentrations in the afternoon. The concentrations of light alkanes were high, probably due to the emission from liquefied petroleum gas (LPG) and evaporation of gasoline. Especially, the concentration of propane was the highest in the morning samples. The concentrations of propane, ethylene, acetylene, and toluene were prominent in their hydrocarbon groups, respectively. These components were the main source of car exhaust, gasoline evaporization, LPG, or solvent usage.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.5
• /
• pp.320-326
• /
• 2000

Promoters of the genes G3P, ICL1, POT1, POX1, POX2 and POX5 of the yeast Y. lipolytica were studied in respect to their regulations and activities during growth on different carbon sources. The aim of this study was to select suitable promoters for high expression of heterologous genes in this yeast. For this purpose the promoters were fused with the reporter gene lacZ of E. coli and integrated as single copies into the genome of Y. lipolytica strain PO1d. The measurement of expressed activities of ${\beta}$-galactosidase revealed that pICL1, pPOX2 and pPOT1 are the strongest regulable promoters available for Y. lipolytica, at present. pPOX2 and pPOT1 were highly induced during growth on oleic acid and were completely repressed by glucose and glycerol. pICL1 was strongly inducible by ethanol besides alkanes and fatty acids, however, not completely repressible by glucose or glycerol. Ricinoleic acid methyl ester appeared as a very strong inducer for pPOT1 and pPOX2, in spite of that it inhibited growth of Y. lipolytica transformants.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.397-400
• /
• 2009

Ozone caused the crack on the surface of a rubber article by oxidation of double bond at room temperature. Wax migrates to the surface of a rubber article and makes a physical barrier to prevent process of ozonation. We investigated change of molecular weight distribution of waxes in unfilled NR, SBR, and BR vulcanizates before and after aging at room temperature for 6 months. Migration and evaporation behaviors of wax in a rubber article at ambient conditions help understand a role of wax as an antidegradant and appearance contamination of a rubber article. The relative intensity distribution of n-alkanes of the NR specimen after the aging was shifted to higher molecular weight compared with the relative intensity distribution before the aging, while those of the SBR specimen before and after the aging did not show a big difference.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.5
• /
• pp.881-888
• /
• 2010

solvent-tolerant bacterium strain, MH6, was isolated by hydrophilic organic solvent DMSO enrichment in the medium and identified as Serratia marcescens. The extracellular protease with novel organic-solvent-stable properties from strain MH6 was purified and characterized. The molecular mass of the purified protease was estimated to be 52 kDa on SDS-PAGE. The open reading frame (ORF) of the MH6 protease encoded 504 amino acids with 471 amino acid residues in the mature protease. Based on the inhibitory effects of EDTA and 1,10-phenathroline, the MH6 protease was characterized as a metalloproteinase. The enzyme activity was increased in the presence of $Ni^{2+}$, $Mg^{2+}$, and $Ca^{2+}$. The protease could also be activated by the nonionic surfactants Tween 80 (1.0%) and Triton X-100 (1.0%). The protease showed remarkable solvent stability in the presence of 50% (v/v) solutions of long-chain alkanes and long-chain alcohols. It was also fairly stable in the presence of 25% solutions of hydrophilic organic solvents. Owing to its high stability in solvents and surfactants, the MH6 protease is an ideal candidate for applications in organic catalysis and other related fields.

• Journal of ILASS-Korea
• /
• v.23 no.2
• /
• pp.66-73
• /
• 2018

Volatile organic compounds (VOCs) are well known as ozone precursors from photochemical reactions and contribute to the formation of photochemical smog which pose health hazards. Also, some of these compounds directly affect the human health due to their toxicity such as benzene. In this study, NMVOCs composition in exhaust gas from recreational vehicle (RV) and (MPV) were characterized using a chassis dynamometer. The results for NMVOCs have reported that alkanes emission was higher than alkenes, aromatics and cycloalkanes due to reactive of diesel oxidation catalysts. The NMVOCs composition according to carbon number was highly distributed between C3 and C6~C8. During the engine cold start condition, NMVOCs emission was higher compared to the engine hot start condition due to the increased catalytic activity. The NMVOCs emission with DPF increased compared to that without DPF. The results of this study will be provide to calculate VOCs emissions from mobile source.

• Journal of ILASS-Korea
• /
• v.23 no.2
• /
• pp.74-80
• /
• 2018

Emission characteristics of regulated pollutants (CO, NOx, HC and PM) and hazardous air pollutants (HAPs) from diesel heavy duty trucks equipped with EGR+pDPF and SCR for Euro 5 emission standards were investigated using a chassis dynamometer. In the case of regulated pollutants, diesel heavy duty trucks with EGR+pDPF emitted 79% less CO than those with SCR. Also, those with the SCR emitted 36% less NOx than those with the EGR+pDPF. The results of VOCs have show that alkanes emissions for heavy duty trucks with the EGR+pDPF and the SCR have been higher than alkenes, cycloalkanes and aromatics. In the case of individual VOCs, the highest of propene emissions for 11.3~16.1% occupied. For aromatics group, benzene emissions are the highest percentage for 4.4~15.5%. In the future, the results of present study will provide basic data to set up HAPs emissions inventory for mobile source.

• Journal of the Korean Applied Science and Technology
• /
• v.8 no.2
• /
• pp.145-151
• /
• 1991

Hazadous properties were evaluated for Alkyl nitrates such as hexyl nitrate, decyl nitrate, dodecyl nitrate and 2-methyl pentyl nitrate, 2-hexyl ethyl nitrate. The thermochemical properties such as heat of vaporization, boiling point, flash point and kinetic parameter for aliphatic nitrate were measured to determine the hazadous properties of these compounds. The boiling points and heat of vaporization increase as the increase of alkyl chain length in alkyl nitrates. Flash point is a linear function of boiling point as same as alkanes. The rate equation in isothermal decomposition are 1/2 order and compensation effect is found between logarithm of frequency factor the activation energy, then the decomposition preceeds with simlar reaction mechanism for each nitrate.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.1
• /
• pp.110-117
• /
• 2000

A series of new liquid crystalline dimesogenic compounds with chiral tails was synthesized, and their thermal and liquid crystalline properties were studied. The chain length of the central polymethylene spacers (x) was varied from dimethylene (2) to decamethylene (12). These compounds were characterized by elemental analysis, IR and NMR spectroscopy, differential scanning calorimetry (DSC), and cross-polarizing microscopy. All compounds were found to be enantiotropically liquid crystalline, and the values of melting ($T_m$) and isotropization temperature ($T_i$) as well as enthalpy change (Δ$H_i$) and entropy change for isotropization (Δ$S_i$) decreased in a zig-zag fashion revealing the so-called odd-even effect as x increases. Their mesomorphic properties fall into three categories depending upon x; (a) compounds with x=2 and 4 formed two different mesophases, smectic and cholesteric phases in that order on heating, and vice versa on cooling, (b) compounds with x=3, 7, 8, 10 and 11 reversibly formed only the cholesteric phase, and (c) compounds with x=5, 6, 9 and 12 exhibited only a cholesteric phase on heating, whereas on cooling they formed two different mesophases, cholesteric and smectic phases, sequentially.

• Ocean and Polar Research
• /
• v.40 no.4
• /
• pp.289-297
• /
• 2018

This study reconstructs past vegetation changes in southeastern Korea over the last 30 thousand years using plant waxes (i.e. long chain n-alkanes) and their carbon isotopic compositions (${\delta}^{13}C_{alk}$) preserved in marine sediment core (KIODP 12-1) retrieved from the East Sea. Here we show changes in vegetation composition in the Korean peninsula in relation to the strength of the East Asian Summer Monsoon. During the Last Glacial Maximum (LGM), when the summer monsoon weakened, precipitation decreased and $C_3$ grassland expanded. After the LGM, the summer monsoon gradually intensified, increasing rainfall, and thus expanding the forestland coverage. Precipitation climaxed from 10 to 6 kyr BP, which includes the Holocene Climate Optimum. The grassland began to expand since 5 kyr BP due to climate warming and drying towards the present. The ${\delta}^{13}C_{alk}$ values may also have been influenced by agricultural activities, which is known to have begun since the late Neolithic (ca. 7.0~3.0 kyr BP). Our results demonstrate how changes in the global climate state influence regional atmospheric circulation and precipitation distribution, and consequently terrestrial plant composition in southeastern Korea.

• Membrane and Water Treatment
• /
• v.10 no.5
• /
• pp.361-372
• /
• 2019

Effect of different alkane based solvents on the stability of emulsion liquid membrane was investigated using normal alkanes (n-hexane, n-heptane, n-octane and n-decane) under various operating parameters of surfactant concentration, emulsification time, internal phase concentration, volume ratio of internal phase to organic phase, volume ratio of emulsion phase to external phase and stirring speed. Results of stability revealed that emulsion liquid membrane containing n-octane as solvent and span-80 (5 % (w/w)) as emulsifying agent presented the highest amount of emulsion stability (the lowest breakage) compared with other solvents; however, operating parameters (surfactant concentration (5% (w/w)), emulsification time (6 min), internal phase concentration (0.05 M), volume ratio of internal phase to organic phase (1/1), volume ratio of emulsion phase to external phase (1/5) and stirring speed (300 rpm)) were also influential on improving the stability (about 0.2% breakage) and on achieving the most stable emulsion. The membrane with the highest stability was employed to extract acridine orange with various concentrations (10, 20 and 40 ppm) from water. The emulsion liquid membrane prepared with n-octane as the best solvent almost removed 99.5% of acridine orange from water. Also, the prepared liquid membrane eliminated completely (100%) other cationic dyes (methylene blue, methyl violet and crystal violet) from water demonstrating the efficacy of prepared emulsion liquid membrane in treatment of dye polluted waters.